|◀ ◀ 1 - 12 of 452 ▶ ▶|
View:

LOW POWER DISCONNECT MODULE 12VDC/24VDC input, Disconnects

Item#:
LPD
You must be logged in to order this item. Log in here

PAM RELAY ENC 24V AC/DC 120VAC 10A SPDT POLARIZED RED LED UL

Item#:
SSU-PAM-1
You must be logged in to order this item. Log in here

Relay Module, 12/24VDC, DPDT Contacts @ 5A - 220VAC/28VDC

RB1224 Relay Module can be utilized in many different applications such as: Dry Contact, Line Seizure, Polarity Reversal, Latching Dry Contact, and much more. The RB1224 is snap track mountable.

Input Voltage

  • 12VDC or 24VDC operation.
  • Current draw: 75mA.
Contact Rating
  • DPDT contacts rated at 5A/220VAC or 28VDC.
LED Indicators
  • Relay status LED.
  • Remote LED status output.
Temperature
  • Operating temperature: -25ºC to 55ºC (-13ºF to 131ºF).
  • Storage temperature: -25ºC to 70ºC (-13ºF to 158ºF).
  • Relative Humidity 85% +/-5%.

Item#:
RB1224
You must be logged in to order this item. Log in here

4-PT FIBER MEDIA CONV/BT/2SFP

Item#:
NETWAYSP41BTB
You must be logged in to order this item. Log in here

Relay Module, 12/24VDC, SPDT Contact @ 30A - 28VDC/120VAC/277VAC

RB30 relay module is designed for continuous duty. This rugged, reliable and dependable relay will handle many switching application.

Input Voltage

  • 12VDC or 24VDC operation.
  • Current draw: 95mA
Contact Rating
  • 30A./28VDC, 120VAC or 277VAC SPDT contacts
Temperature
  • Operating -25ºC to 55ºC ( -13ºF to 131ºF).
  • Storage -25ºC to 70ºC ( -13ºF to 158ºF).
  • Relative Humidity 85% +/- 5%.
  • System AC input VA requirement:
  • 12VDC: 11.4VA.
  • 24VDC: 22.8VA

Item#:
RB30
You must be logged in to order this item. Log in here

Relay Module, Ultra Sensitive, 12/24VDC, DPDT Contacts @ 1A

Altronix RBSNTTL ultra sensitive relay is designed for continuous duty. This rugged and dependable relay will handle any switching application.

Input Voltage

  • 12VDC to 24VDC selectable operation.
  • 3VDC to 24VDC 2mA - 16mA isolated trigger.
  • Current draw: 45mA.
Contact Rating
  • 1A/120VAC or 2A/28VDC DPDT contacts.
Temperature
  • Operating -25ºC to 55ºC ( -13ºF to 131ºF).
  • Storage -25ºC to 70ºC ( -13ºF to 158ºF).
  • Relative Humidity 85% +/- 5%.
  • System AC input VA requirement: 10.8VA.

Item#:
RBSNTTL
You must be logged in to order this item. Log in here

Relay Board

The RB1000 is a low-current Form-C relay that will provide an additional dry contact output when connected to an "3" output lug on a Napco control panel. This relay may be used to drive a siren or strobe light, trip a long-range wireless radio, activate access control dvices, etc.

Item#:
RB1000
You must be logged in to order this item. Log in here

RELAY MODULE 6/12V, DPDT 5 AMP peration, 120mA current draw,

RB5 relay module is designed for continuous duty. This rugged, reliable and dependable relay will handle many switching application.
Input Voltage

  • 6VDC or 12VDC operation.
  • Current draw: 120mA.
Contact Rating
  • 5A/220VAC or 28VDC DPDT contacts.
Item#:
RB5
You must be logged in to order this item. Log in here

Relay; Sensitive 1 mA trigger, DPDT, 12/24V, (4 pack)

The ELK-924 Sensitive Relay module features DPDT (Form "C") dry contacts for general purpose switching of devices or high current loads. It operates on 12 or 24 volts DC and can be triggered with a negative or positive input at an incredible low current of only 1 milliamp. 
  • Super Low 1.2 mA Trigger Current
  • Positive (+) Or Negative (-) Trigger Input
  • Double Form "C" Contacts DPDT
  • Heavy Duty Contact Rating
  • On Board LED Status Indicator
  • Includes Double Sided Mounting Tape
  • Mounts in Standard 2.75" Snap Track
  • Packaged in Reusable Poly Storage Box
  • Operating Voltage: 12 or 24 Volts DC, jumper selectable
  • Current Draw: 60mA (both relays on)
  • Relay Contacts: Form "C" , 7A @ 30VDC, 10 A @ 125VAC
  • Size: 1.5" X 2.75"
  • Trigger Voltage: 5 - 24VDC
  • Trigger Current: 1.2mA @12 VDC
Item#:
9244
You must be logged in to order this item. Log in here

Delay Timer Relay, 12/24V, 1 Sec. - 60 Min.

The ELK-960 Delay Timer is designed to be an economical and flexible solution for any general-purpose timer application. The unit can be configured for use on 12 to 24V systems, with positive or negative trigger logic. Positive triggers can be as low as 4.5V. Setup is quick and easy with thumbwheel adjustment between 1 and 60 seconds. A quick jumper setting converts the time from seconds to minutes. The Timer can be configured to activate once for each trigger, or free-run as soon as power is applied. Relay can be configured to be normally on or normally off.
  • 12 to 24 Volt DC Operation
  • Adjustable Time Delay
  • SPDT (Form "C") Relay
  • Low Current Input Trigger (<1ma)
  • Selectable Positive or Negative trigger
  • Selectable Initial Relay State: ON / OFF
  • Operating Modes: One-Shot or Repeat
  • LED Indication of Relay State
  • Operating Voltage: 12 to 24 Volts DC.
  • Current Draw: 40 mA DC with relay on.
  • Time Settings: 1 to 60 Seconds or 1 to 60 Minutes.
  • Relay Contacts: Form "C", 7A @ 30VDC, 10 A @ 125VAC.
  • Size: 3" x 2.2" x 1" (Fits Standard. Snap Track).
  • Trigger Voltage: 4.5 - 24VDC.
Item#:
960
You must be logged in to order this item. Log in here

Master Power Switch (20 pack)

The ELK-964B21 is a pack of 20 Master Power Switches. It is designed to work with virtually any 12 Volt control panel or power supply. This convenient power switch permits the installer or user to easily disconnect both the Battery and the AC power from the control or power supply. 
  • Works With Any 12 Volt Control Panel
  • AC and Battery On / Off Power Switch
  • Visual LED Power Indicator
  • Installer Friendly - Small Compact Size
  • Includes AC Wires & Battery Leads
  • Fits Standard Snap Track
  • Includes Double Sided Mounting Tape
  • Relay Contacts: Form "C", 7 Amp @ 28 VDC
  • On / Off Power Switch: DPDT Slide Type
  • AC Power Leads: 18 AWG, 18" Length
  • Maximum Transformer Size: 18 VAC
  • Battery Leads: 18 AWG, 18" Length
  • Low Battery Cutoff Voltage: ~ 10 VDC
  • Size: 1.75" X 2.185"(44.5mm X 55.5mm)
Item#:
964B20
You must be logged in to order this item. Log in here

DPDT 12 or 24 VDC with 1.2 mA Trigger

The ELK-924 Sensitive Relay module features DPDT (Form "C") dry contacts for general purpose switching of devices or high current loads. It operates on 12 or 24 volts DC and can be triggered with a negative or positive input at an incredible low current of only 1 milliamp.
Also available in a 4 pack (ELK-9244) which is packaged as 4 relay modules grouped on a pre-scored break-off circuit board.
Includes:

  • (1) ELK-924 Relay
  • 6 pieces of Double Sided Mounting Tape
  • Instructions
Features:
  • Super Low 1.2 mA Trigger Current
  • Positive (+) Or Negative (-) Trigger Input
  • Double Form C Contacts DPDT
  • Heavy Duty Contact Rating
  • On Board LED Status Indicator
  • Includes Double Sided Mounting Tape
  • Mounts in Standard 2.75 in. Snap Track
  • Packaged in Reusable Poly Storage Box
  • Lifetime Limited Warranty
Specifications:
  • Operating Voltage: 12 or 24 Volts DC, jumper selectable
  • Current Draw: 60mA (both relays on)
  • Relay Contacts: Form C , 7A @ 30VDC, 10 A @ 125VAC
  • Size: 1.5 in. X 2.75 in.
  • Trigger Voltage: 5 - 24VDC
  • Trigger Current: 1.2mA @12 VDC
Item#:
924
You must be logged in to order this item. Log in here
|◀ ◀ 1 - 12 of 452 ▶ ▶|
View:
(Denotes required field.)