S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
- Flexible optic design to meet or exceed the light output on vertical/horizontal dispersion
- Strobe Candela: Adjustable at 15, 30, 75 or 110cd *Based on test result with clear lens cover
- Adjustable two audible tone settings: Continuous (high/low) / Temporal 4 (high/low)
- Size: 5 1/2 x 4 3/4 x 2 in. (14 x 12 x 5 cm)
- 20ms pulse duration
- Low Current Draw
- High power cool white LED is used
- Strobe flash rate: 1 flash per second
- Nominal Voltage: Regulated 24VDC
- Operating Voltage: 16 to 33 VDC
- Operating Environment: 32°F to 120°F (0°C to 49°C). 10 to 93% RH
- Works with Macurco DVP-120 & DVP-120M control panels
- Works with Macurco 6 & 12 Series detectors
The EnviroAlert EA-200 critical-environment monitoring device provides visibility to 2 environmental factors: ambient temperature and an additional factor of temperature, humidity or water presence. In addition to the local (on device) visual and audible notifications, when integrated to a security panel the system allows for the real-time notification of an incident and immediate corrective action.
Features:
To enroll the DWS-LL, begin by placing the panel into wireless enrollment mode and then sending an enrollment signal from the LongLife sensor. Alternatively, the LongLife sensor can be enrolled by scanning its bar code using the Alula app or by entering its 8-character serial number on the interactive GeoArm web portal.
To install the DWS-LL, begin by removing the adhesive paper and adhering the LongLife contact and magnet on a door or window. Clean the surface of where you plan on mounting it. Leave a minimum of 3/16 inch clearance around the ends of the sensor to allow the cover to open. Make sure to align the alignment marks on the LongLife and magnet when mounting. Alternatively, LongLife can be used with an external contact instead of the reed switch.
The High Bond Tape (3M VHB Tape) works great if the surface is properly prepared and firm pressure is applied for over 10 seconds. The LongLife wireless performance is optimized when mounted near the top of the door in a vertical orientation.
- Low-profile design
- Easy, slide-open cover
- Battery pull-tab enrollment
- 5-year product warranty
- 10-year battery life (replaceable)
The HUSK-20 is a mechanical hold-up switch designed for silent operation. It is activated by using one finger to press down on the switch.
When activated, the switch mechanism locks, insuring an immediate alarm signal. A status window designed on top of the hold-up switch indicates its condition: RED (alarmed) and BLUE (armed). To reset the HUSK-20, use the key provided. The housing is made of metal and is painted gray.
The hold-up switch sends a signal to a dedicated 24 hour hold-up circuit of a burglar control panel. That signal in turn will send the immediate signal to police or central station.
Features:
- Tri-Mode Environmental Sensing:
- Flood, high and low temp
- Freeze - for Furnace Failure - Under 45 degrees F
- Overheat - for Furnace runaway or Air Conditioning failure - Over 100 Degrees F
- 3 unique wireless IDs or Loops: one for each function
- Cover and wall tamper
- 3-5x more range than competing "puck" style sensors.
- 8-10 year battery life on CR2032 battery.
- IP67 waterproof rating
- 2.43 x 2.48 x 1.17 inches
S2K Administration - Form Template Display
Actions