The sensor (Model 2GIG-TILT1e-345) is designed for applications where the tilt status of an asset, such as a garage door, needs to be monitored. Other uses might include: mailbox doors, large pet doors, or hinged storm cellar doors. The tilt sensor communicates with the control panel using the 345 MHz frequency. Once the sensor is tilted to 45 degrees, the sensor will transmit to the panel. The sensor will also send a restore signal when the sensor it returned to less than 45 degrees.

Features

1. Encrypted Protocol for Enhanced Security
2. Encrypted Wireless Tilt Sensor
3. Sensor transmits alert when tipped 45° off vertical
4. Restore signal sent when sensor returned to less than 45°
5. Requires GC2e panel firmware revision 1.14 or higher
6. Long life lithium battery included
7. Screw, adhesive mount hw. included

• StarLink™ Up/Downloadable intrusion alarm communicators
• Universal full event reporting from any panel to any central station
• EZ Activation - Automatic dialer-capture technology eliminates time-consuming web setup
• Use in primary or backup communication mode
• Full High-Speed Napco control panel remote uploading/downloading
• Compatible with any panel that communicates using Contact ID or 4/2 format
• Three programmable inputs, including smart channel (burg/fire bell input)
• Three programmable outputs• Service plan sold separately (through NapcoComNet.com)

1. Monitors any UL existing smoke detector
2. Does not impact UL or Fire Marshall approval of existing smoke detectors
3. 100% compatible with 2GIG panels
4. Uses 1 CR123A long life lithium battery
5. FCC, IC, and ETL listed in US and Canada to UL985 standard

The TG-1 Express CDMA transmits full data from security and fire systems to central stations using a nationwide digital cellular network.
Todays modern family commonly chooses to use their cell phone or VoIP service instead of paying for a traditional phone line. This growing trend makes what was once the most common form of communication for the security system unavailable in many new installations. When there is no telephone service available from your customers home, Telguard model TG-1 Express CDMA ensures that critical alarm information reaches the central station.

Features

• Supports virtually all alarm formats using dial capture for universal panel compatibility.
• Ideal for mountainous and rural areas where coverage may be challenging.
• Supports HomeControl Flex for remote arming, disarming and more.
• Reduces install time by exclusively using the power and backup battery from the panel.
• Power and dial capture over a single cable for greater flexibility.

Napco NetLink Module, NL-MOD, will allow Napco Gemini Panels, from the P816 thru the X255, to fully, securely communicate alarms, status, supervisories, etc., pinpointed by zone over the internet to the central stations PC running NL-CSRCV Central Station application software or NetLink TCP/IP UL Receiver(s) NL-RCV-RMPCUL, below), using secure, NIST/AES 128bit encryption. At the central monitoring office, the panel module source is immediately received, authenticated as a valid account, and its alarm reports decoded and sent to awaiting CS operators for disposition. (NLMOD is initially set using NL-MODCONFIG, a download software utility for programming/configuring the panel module.)