S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
- Can be easily mounted on doors or windows with included adhesive
- Alerts IQ Panel if moved more than .5"
- Can be programmed as "Safety Sensor" for medicine cabinets, chemical storage, safes or storage closets
- Using Alarm.com you can get a text if your door or window is left open
- Create automation rules like "turn on light when door is opened" or "adjust thermostat if window left open"
- Requires two (2) 3V CR2032 Batteries
- The built-in tamper switch triggers an alert if the cover is removed
- Create custom names for each sensor, determine unique chime type, choose voice prompts on or of
- Sensor: 3.25"H x 1.3"W x 1"D (8x3x1.5 cm) Magnet: 1.3"H x 0.435"W x 0.312"D (3.3 x 1.1 x 0.79 cm)
- Wireless signal range: 600ft (200M), open air. Code outputs: tamper, tamper restore, alarm (primary open), alarm restore (primary close), external alarm (secondary wired open), external restore (secondary wired closed), low battery. Transmitter frequency: 319.5 MHz
- Unique code ID
- Supervisory keep-alive interval: 70 minutes. RF Peak field strength: typical 36000 uV/m at 3m
- Operating Temperature: -10C~50C Relative Humidity: 5-95% Non-Condensing Storage Temperature: -40-80C
- Replace battery with exact replacement every 5 years with 3V CR2032 Lithium (x2).
New to the DSC family of wireless products, the WS4920 Wireless Repeater delivers an easy-to-install wireless device that significantly extends the range for DSC 1-way wireless devices from the control panel/receiver and compensates for interference sources by improving the signal quality. The WS4920 repeats the 1-way wireless devices signal to ensure high-quality signals are transmitted to the control panel/ receiver.
The WS4920 Wireless Repeater is ideal in both new and existing installations. In the past, occasionally the size of the building, layout or even materials of construction, required additional receivers or a wired system. Now with the WS4920 Wireless Repeater, up to four repeaters can be installed on one control panel.
Within existing installations, in some instances, the wireless signal from devices may be adversely affected by interference and noise sources, such as interference-generating electronics or changes to the existing layout or construction materials. The backward compatible WS4920 Wireless Repeater easily extends the range of 1-way wireless devices and can avoid costly
Features:
- Greatly extends the range of DSC 1-way wireless devices
- Compatible with IMPASSA
- Backward compatible with existing security systems including PowerSeries SCW9047, PowerSeries and MAXSYS
- WS4920 identifies the optimal location for mounting taking in to consideration noise and interference
- Quick enrolment of DSC 1-way wireless devices
- Status LEDs for AC, battery and RF Jam
- Up to four repeaters can be installed for each panel/receiver
- WS4920 supports up to 164 wireless devices
- Wall and case tamper protection
- Aesthetically pleasing design
The PG9975 communicates with the security system to report openings and closings of doors and windows. The PGx975 contact is designed to be almost invisible after installation and blend within the décor.
The PG9975 PowerG Door/Window Contact is equipped with a visible signal quality LED indicator on the contact that lets the installer choose the optimal location for installation, without having to go back and forth to the keypad.
One of the smallest and most unobtrusive door/window contacts available, the PGx975 contact is housed within a compact casing that allows it to be used for thetightest-fitting installations or where aesthetics are critical. The slim case provides a streamlined, practically non-existent look once installed, complementing the décor of most homes.
Features:
- Wafer-thin profile
- Visible link quality indicator on device
- Fully supervised
- Includes double-sided tape
- Large transmission range enabling repeater-free installations
- Easy to install and remove
- Prolonged battery life (3 years with typical use)
- Dimensions: 62 x 25.4 x 7.7mm (2.45 x 1 x 0.3in
S2K Administration - Form Template Display
Actions