S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
- Uses LTE cellular network for high-speed, reliable and low-cost communications to an IP receiver Automatically switches to 3G (HSPA/ HSPA+) if LTE service is not available
- Compatible with control panels that communicate using the Contact ID and SIA (300 baud) formats
- Full event reporting
- 2 on-board inputs
- 2 on-board outputs (open collector)
- Activation and initialization via website or mobile interface provided by C24 Communications
- View communicator status directly from your mobile phone to support on-site or remote troubleshooting
- PTM (Panel Transmission Monitor) switches from PSTN to cellular on unsuccessful communication attempts
- SMS command & control for panel arm/disarm
- PTM call routing to direct cellular signals to multiple receivers based on dialed number
- Advanced carrier selection to secure a suitable cellular connection
- Two unique trouble display models
- Compatible with Sur-Gard System I-IP/II/III/IV/5 monitoring station receivers
- Mobile Site for Easy Installation and Comprehensive Maintenance
- Advanced Panel Transmission Monitoring
- SMS Command & Control
- Input Voltage 13.8 Vdc
- Current Draw (without battery) 40 mA (standby) 180 mA (transmitting)
- The LE4000 has been listed by UL/ULC for Residential Fire and Burglary and UL/ULC Commercial Burglary installations.
- Dimensions 8.5" H x 4.9" W x 1.3" D (216mm x 124mm x 33mm)
Item#:
LE4000RF-ADTAT
You must be logged in to order this item.
Log in here
Wireless Reception Booster Antenna for Mier's wireless long range (LR) Drive-Alert Systems - 3000 feet
Item#:
DA-660
You must be logged in to order this item.
Log in here
- Supports dual inputs
- Can be used with almost any standard NO/NC contact
- Fully supervised
- Includes case tamper protection
Item#:
EN1212
You must be logged in to order this item.
Log in here
This item has been discontinued and replaced by item
ADC-S2000-T
The Alarm.com Temperature Sensor is specifically designed to work with the Alarm.com Smart Thermostat to provide advanced functionality and precision comfort. With the Temperature Sensor, customers can monitor the temperature of any indoor location and receive temperature alerts through the web or mobile device.
Customer case uses:
- Maintain the home temperature based on the most lived in areas
- Keep the nursery at a comfortable temperature when the baby's sleeping
- Monitor individual room temperature around the house
- Get alerts when the temperature drops in key rooms (for example, in the basement near water pipes)
Included accessories:
- CR123 Battery
- Double-sided adhesive tape
- Finishing Nail
Product highlights:
- Model #: ADC-S2000-T-RB
- 33mm (L) x 21mm (W) x 51mm (H)
- FCC ID: 2AC3T-B36510RA
- IC: 12323A-B36510RA
- Z-Wave Plus Certified
- US Z-Wave Frequency (908 MHz)
- Operating Temperature Range: 32° to 90°F (0°C to 35°C)
- Battery powered, 3+ year battery life
- Install options: nail or adhesive tape
- OTA Upgradable on supported panels
- Designed for indoor use only
Item#:
ADC-S2000-T-RB
You must be logged in to order this item.
Log in here
S2K Administration - Form Template Display
Actions
(Denotes required field.)