Home  >  INTRUSION  > (x)
|◀ 469 - 480 of 8235 ▶|
View:
The ELK-319HRR is a Supervised, Wireless Heat Sensor. It uses a solid-state thermistor to sample and trigger an event at a selectable setpoint of either 135 or 200 degrees F. It can also trigger an event if the temperature rises 12 degrees F or more during a one (1) minute time period.
This sensor is compatible with Elk's 319MHz Receivers/Panels as well as many other panels that operate on the 319.5MHz Frequency and adhere to the ITI/Interlogix protocol.
  • Ideal for garages, kitchens, attics, utility closets, etc.
  • Long range and battery life
  • Transmits alarm, tamper, low battery, and supervisory signals
  • Powered by a single CR123 battery
  • RF frequency: 319.5 MHz
  • Compatibility: ELK-319 Receivers/Panels & other panels that operate on the 319.5MHz Freq. and adhere to the ITI/Interlogix protocol
  • Battery type: One (1) 3VDC lithium battery
  • Dimensions: 2.29" Dia. x 1.28" H (58.25mm x 32.4mm)
Item#:
319HRR
You must be logged in to order this item. Log in here
The ELK-319DG is a Supervised, Wireless Sensor uniquely designed for outdoor use on swing gates or doors. The sensor and magnet can be mounted using screws (included), pipe strap style clamps, or plastic wire ties. 
This sensor is compatible with Elk’s 319MHz Receivers/Panels as well as many other panels that operate on the 319.5MHz Frequency and adhere to the ITI/Interlogix protocol.
  • All weather design
  • Ideal for pool areas and other outdoor gated spaces
  • Long range and battery life
  • Transmits open/close, tamper, low battery, and supervisory signals
  • Uses easy to find CR2032 batteries
  • RF frequency: 319.5 MHz
  • Compatibility: ELK-319 Receivers/Panels & other panels that operate on the 319.5MHz Freq. and adhere to the ITI/Interlogix protocol
  • Battery type: Two (2) CR2032 3VDC lithium coin-cell 
  • Operating Temp Range: -40 to 140°F (-40 to 60°C)
  • Dimensions: Sensor 3.39" L x 1.34" W x 0.79" D, Magnet 2.36" L x 0.83" W x 0.8" D
Item#:
319DG
You must be logged in to order this item. Log in here
This item has been discontinued and replaced by item 
Item#:
PKIT-1V
You must be logged in to order this item. Log in here

A bulky home security system can be an eyesore. Adding to that stress is hard wire installation permanently altering the aesthetics of a room, door or window treatment. With its wireless connectivity and fully concealed platform, however, the Ion Security Plunger is a door security sensor that finally eliminates these pesky inconveniences.

Features:

  • Dimensions: 0.33 in. deep x 0.75 in. diameter
  • Fully concealed in wood door frame
  • Compatible with all DSC, GE, HAI and 2GIG Wireless receivers
  • 500 ft open air wireless transmit range
  • Long-life Battery  5+ years (avg)

Item#:
PLUNGER-2GIG
You must be logged in to order this item. Log in here
RE617 Heat Alarm is a fire-protection device that alarms when it detects temperatures above 135°F (57°C) or temperature changes greater than 15°F (8.3°C)/min and the temperature is above 104ºF (40ºC).

Features

• UL539 and ULC-S530 listings
• Heat detection
Item#:
RE617
You must be logged in to order this item. Log in here

FireFighter is the newest innovation from Encore Controls Inc. It is the easiest, most cost effective way to add smoke alarm monitoring to your 2GIG control panel. FireFighter’s unique technology monitors the existing UL smoke detectors within the home. When an alarm is detected a wireless signal is sent to the control panel which in turn contacts the central monitoring station. With interconnected hardwired smoke detectors found in most homes today, only one FireFighter is needed to monitor ALL the smoke detectors within the home.

Features
  1. Monitors any UL existing smoke detector
  2. Does not impact UL or Fire Marshall approval of existing smoke detectors
  3. 100% compatible with 2GIG panels
  4. Uses 1 CR123A long life lithium battery
  5. FCC, IC, and ETL listed in US and Canada to UL985 standard
Item#:
2GIG-FF1E-345
You must be logged in to order this item. Log in here

The ELK-SP30 is an interior multi-purposesurface mount speaker great for voice and sounds.
Features:

  • Pre-Wired For Quick And Easy Installation
  • Compact, Easy To Mount, Hardware Included
  • Heavy duty magnet, Mylar cone
  • Lifetime Limited Warranty
Specifications:
  • Impedance: 8 Ohms
  • Rating: 20 Watts Nominal
  • Frequency Response: 250 to 8000 Hz
  • Size: 4.25 in. x 4.25 in. x 2.13 in.(108mm x 108mm x 54mm)
  • Color: White
Item#:
SP35
You must be logged in to order this item. Log in here

The 2GIG-FT1-345 is a fully supervised, tamper protected one-way 345 MHz sensor. It will monitor the ambient temperature and will detect a wet/dry flood condition. The sensor reports wet/dry conditions and temperature to the panel.

Once the sensor probe detects the presence of water for three (3) minutes, the integral transmitter will send a wet alarm transmission to the security/control panel. The probe will also send a restore (dry) report when the presence of liquid is no longer detected by the flood probe for three (3) minutes. For flood reporting, the sensor requires the installation of the supplied external flood probe. The sensor is capable of detecting clean or dirty fresh water, salt water, or tap water.

Features:

  • Detects standing water that reaches the sensor probe and notifies the panel
  • Sends trouble alert to the panel when the ambient temperature exceeds 84 deg. F
  • Sends trouble alert to the panel when the ambient temperature falls below 42 deg. F
  • Ships with long life lithium battery life (typical battery life of 5 years)
  • ETL listed
  • Requires Firmware Version 1.14 or later for GC2 panel and 3.1 or later for GC3

Item#:
2GIG-FT1-345
You must be logged in to order this item. Log in here

Features:

  • Three different tones: single tone chime, dual tone chime, and fading tone chime
  • Any combination of the three tones may be used
  • Includes high-low volume control
  • Mounts into a single gang box




Item#:
PC-300
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

The PG9974P Wireless PowerG Mirror Optic PIR Motion detector is a vital component of a security system. Upon the detection of motion, the PG9974P communicates an alert to the security system. Additionally, the PG9974P provides immunity from pets weighing up to 40 kg (90 lb) to reduce false alarms. Using advanced technologies, the PG9974P provides reliability, robustness to interference, prolonged battery life, extended range and easy installation.
 
The PG9974P uses a combination of elliptical parabolic mirror optics. This innovative technology creates an exceptionally efficient mirror with extremely high optical gain, delivering longer range and providing excellent detection sensitivity.

The PG9974P also applies a digital temperature compensation that allows the detector to continuously adjust its sensitivity according to the location temperature. In this way, the PG9974P is able to detect an intruder even when the ambient temperature is close to that one of the human body.

The PG9974P uses an obsidian black mirror technology. A unique, nickel-based, obsidian-like, reflective surface acts as a selective optical filter of infrared energy. In this way, the PG9974P can virtually eliminate white light interference and increase detection sensitivity.

 
Features:

  • Coverage area: 50ft (15m), 90°
  • Mirror optics offer exceptionally high detection sensitivity and immunity to false alarms
  • Vandal-resistant design (Small, recessed and robust slot window)
  • Easy to install - no vertical adjustment needed
  • Front and Back tamper
  • Dimensions: 115 x 60 x 48mm (4.5 x 2.3 x 1.9in)
  • Certified with ULC Wireless Commercial Burglary Listing under ULC-S304-16 Standard
Item#:
PG9974P
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
|◀ 469 - 480 of 8235 ▶|
View:
(Denotes required field.)