RB30 relay module is designed for continuous duty. This rugged, reliable and dependable relay will handle many switching application.

Input Voltage

• 12VDC or 24VDC operation.
• Current draw: 95mA

The Thin Door/Window Contact is designed for use on doors, windows, and other objects that open and close. It communicates with the control panel using the 345 MHz frequency. When the magnet (which is mounted near the sensor) moves away from or closer to the door contacts sensor, signals are transmitted to the control panel.

The door contact also has an external input that accepts connections from normally-closed (NC) dry contact devices. For added protection, it is also equipped with a cover tamper.

Features:

• For narrow applications, sensor is only 3/4in. wide
• Fully supervised
• Rare earth magnet
• Supports internal and external contacts
• Can be used for 2 zones of protection
• Lithium battery
• ETL listed

The T-Link universal IP alarm communicator (TL300) is a valuable addition to the T-Link family of Internet/network alarm communicators. Capable of communicating with any control panel (including third-party manufacturers) that uses the Contact ID format, the simple-to-install TL300 saves end-users money by taking advantage of their existing IP networks and security equipment to create fully supervised security solutions between protected premises and central monitoring stations. This method provides flexibility and an always-on, two-way line of communication. The TL300 communication stream is small and requires only a limited amount of network bandwidth. This ensures that the integrity of the data being transferred never becomes compromised. To reduce security risks, the module utilizes industryleading, 128-bit AES encryption, polling and hardware substitution protection.

Features

• Compatible with most control panels that use the Contact ID format
• Instant, always-on IP communication
• Works over local LAN/WAN network or the Internet
• 128-bit AES encryption (NIST approved)
• Supports DHCP (dynamic IP addresses)
• Low network bandwidth requirements
• Compatible with 10/100BaseT networks
• Reports events to 2 different re ceiver IP addresses
• UL standard & encrypted line security
• 12-24 volt DC support (v1.5 and higher)
• 4 on-board programmable zone inputs and 2 programmable voltage outputs as stand-alone module
• Programmable through the PK5500 LCD keypad or T-Link Console software
• Software upgrades via network
• Compatible with Sur-Gard System I/II/III/IV monitoring station receivers
• Polling and hardware substitution protection

Product Features:

• Delivers 360° motion detection from a ceiling-mounted device
• Fully secures large spaces with detection coverage up to 20m (65.6ft) in diameter
• Ensures reliable performance using built-in PowerG leading-edge wireless intrusion technology with two-way communication (Frequency Hopping Spread Spectrum FHSS-TDMA technology)
• Advanced True Motion Recognition™ algorithm differentiates between intruders and other disturbances which may cause false alarms
• Fast installations using link quality LED indicators
• Easy pull-tab auto enrollment
• Motion and temperature detector in one, when enrolled as part of the PowerSeries Pro system
• Presence detection mode - active 15 minutes after installation (power-up) and then only when the panel is in Disarm mode
• Security detection mode - operates as a normal motion security detector
• Built-in link quality indicators eliminate the need for the installer to physically approach the control panel and reduce installation time
• The device supports temperature and light level reports to compatible alarm systems that support temperature and light sensors
• Tamper protection
• Compatible with PowerSeries Neo, PowerSeries Pro and Qolsys panels

The PG9920 PowerG Wireless Repeater significantly extends the communication range between the alarm system and other PowerG devices where the size of the building, layout or even materials of construction, require additional coverage.

When messages from the wireless PowerG devices are received, the PG9920 forwards these messages to the control panel.

The PG9920 continuously measures communication quality and automatically sets transmission power to the minimum required for reliable communication.

With minimal installation time required and few holes to drill, the PG9920 Wireless Repeater reduces on-site time and increases productivity and revenue. The PG9920 is equipped with a visible signal quality LED indicator that lets the installer choose the optimal location for installation, eliminating the effort of going back and forth to the keypad.

Features:

• Extends the overall wireless range
• LED indications for power failure, activity and installation performance diagnostics
• Compact and easy to install
• Front and back tamper protected
• Mains powered with 48 hour backup battery (rechargeable)
• Dimensions: 161 x 161 x 50mm (6.44 x 6.445 x 1.74in)

RB5 relay module is designed for continuous duty. This rugged, reliable and dependable relay will handle many switching application.
Input Voltage

• 6VDC or 12VDC operation.
• Current draw: 120mA.

With this exceptionally smart detector, you get immediate notification of a broken window orglass door. Its unique detection capabilities deliver unprecedented dependability, identifying sounds that other detectors might miss  without the hassle of false alarms.

This added layer of advanced security for the exterior of your home or business lets you take quick action to protect your property, prevent damage to contents, and avoid unnecessary costs.

• Proprietary microphone technology constantly listens to sounds and analyzes patterns
• Smart data analysis captures only real broken window/glass door events
• Complex classification process, utilizing high-power processing, minimizes false alarms