S2K Commerce - Products Dropdown
S2K Commerce - Shopping Cart
S2K Commerce - Order Entry
The 2GIG-FT1-345 is a fully supervised, tamper protected one-way 345 MHz sensor. It will monitor the ambient temperature and will detect a wet/dry flood condition. The sensor reports wet/dry conditions and temperature to the panel.
Once the sensor probe detects the presence of water for three (3) minutes, the integral transmitter will send a wet alarm transmission to the security/control panel. The probe will also send a restore (dry) report when the presence of liquid is no longer detected by the flood probe for three (3) minutes. For flood reporting, the sensor requires the installation of the supplied external flood probe. The sensor is capable of detecting clean or dirty fresh water, salt water, or tap water.
Features:
Features:
- M1 Gold Control Board
- M1KP2 LCD Keypad
- 1280 8Ah BatteryÂ
- TRG1640 AC TransformerÂ
- 73 Echo Paintable Interior SpeakerÂ
- 952 In-line Telephone Surge Protector
- RJSET Telco Jack & Cord
- Large zone capacity: 16 on-board zones expandable to 208
- Wireless capability: Up to 144 zones; supports multiple wireless receivers for increased coverage area
- 13 On-Board Outputs: 1 voice/siren, 1 siren driver/voltage, 1 form “C” Relay, and 10 low current (50 mA) voltage outputs
- Voice Announcement of alarms, zone descriptions, status, etc.
- - 500+ Word/phrase Vocabulary
- - Link up to 6 words/phrases per announcement
- - 10 custom recordable word/phrases
The PG9974P Wireless PowerG Mirror Optic PIR Motion detector is a vital component of a security system. Upon the detection of motion, the PG9974P communicates an alert to the security system. Additionally, the PG9974P provides immunity from pets weighing up to 40 kg (90 lb) to reduce false alarms. Using advanced technologies, the PG9974P provides reliability, robustness to interference, prolonged battery life, extended range and easy installation.
Â
The PG9974P uses a combination of elliptical parabolic mirror optics. This innovative technology creates an exceptionally efficient mirror with extremely high optical gain, delivering longer range and providing excellent detection sensitivity.
The PG9974P also applies a digital temperature compensation that allows the detector to continuously adjust its sensitivity according to the location temperature. In this way, the PG9974P is able to detect an intruder even when the ambient temperature is close to that one of the human body.
The PG9974P uses an obsidian black mirror technology. A unique, nickel-based, obsidian-like, reflective surface acts as a selective optical filter of infrared energy. In this way, the PG9974P can virtually eliminate white light interference and increase detection sensitivity.
 Features:
- Coverage area: 50ft (15m), 90°
- Mirror optics offer exceptionally high detection sensitivity and immunity to false alarms
- Vandal-resistant design (Small, recessed and robust slot window)
- Easy to install - no vertical adjustment needed
- Front and Back tamper
- Dimensions: 115 x 60 x 48mm (4.5 x 2.3 x 1.9in)
- Certified with ULC Wireless Commercial Burglary Listing under ULC-S304-16 Standard
- Encrypted S-Line sensor technology protects signals sent to the IQ Panel while still providing support for legacy 319.5 systems
- 6' cord
- Water "bug" can be fastened to the floor to the wall
- Reports water presence to IQ Panel
- Get e-mail or text alerts if there is water detected
- Sensor: 2.5"H x 1"W x .5"D
- Wireless signal range: 600ft (200M), open air. Code outputs: tamper, tamper restore, alarm, alarm restore, low battery.
- Transmitter frequency: 319.5 MHz
- Unique code ID
- Supervisory keep-alive interval: 70 minutes.
- RF Peak field strength: typical 36000 uV/m at 3m
- Operating Temperature: -10C~50C Relative Humidity: 5-95% Non-Condensing Storage Temperature: -40-80C
- Replace battery with exact replacement every 5 years with 3V Lithium (x2).
- (2) -Panasonic CR2032 -Energizer CR2032 -Duracell DL2032
The ELK-110 Voice "Talking" Driver features high quality digitally pre-recorded voice messages and loud attention getting siren sounds in an economical, low current draw, compact package. It features three input channels (1 for Burglar, 1 for Fire, and 1 for Carbon Monoxide), bilingual voices (English and Spanish), and many unique options which allow it to be used with virtually any residential or commercial alarm installation. The voice messages and the siren alternately sound whenever one of the channels are activated.
Includes:
- ELK-110 Siren Driver
- Wiring Harness
- Double Sided Foam Mounting Tape
- Instructions
- Installer Friendly - Compact & Easy to Mount
- Three Input Channels, Burglar, Fire, and Carbon Monoxide
- Bilingual Voice - English and or Spanish, Siren Only, Speech Only, or Combined
- MilliMiser Lowers Current Draw
- ComboTrigger For Single Outputs
- VolumeStep Slowly Increases Siren Volume
- Temporal 3 Coded Fire Signal
- Temporal 4 Coded CO Signal
- Lifetime Limited Warranty
- Operating Voltage: 10 to 14 Volts DC
- Current Draw: 1.25 Amps, (800 mA on MilliMiser setting), with one 8 Ohm speaker
- Sound Level: 122 db @ 1 meter, 14 vdc, with one 8 Ohm speaker
- Max. Speaker Load: 4 Ohms
- Size: 2.75in x 4.0in (70mm x 102mm)
This brand new and exceptionally flexible platform leverages the superior capabilities of PowerG - the industry's leading-edge wireless intrusion technology. Innovative alarm verification solutions, together with an exceptionally comprehensive remote service software suite, make PowerSeries Neo the ideal first-class solution for residential and scalable commercial installations.
- Back up and primary alarm communication
- Panel remote uploading/downloading support via Cellular/Internet
- Alarm.com Signal Forwarding or UL/ ULC Pass-through reporting modes available
- SIA and Contact ID protocol
- Includes AT&T or Verizon LTE SIM card
- Easy activation process through Alarm.com dealer portal
- Local signal strength and trouble indicators in addition to Alarm.com AirFX remote diagnostics and programming
- Can be located with alarm panel, or mounted remotely up to 100' away using PCL-422 module
- Visual Verification events can be reported to central station and viewed in the Alarm.com mobile app
- Includes Z-Wave Plus and Image Sensor capability to enable Smart Home features
The PG9901 Wireless PowerG Indoor Siren is a fully supervised, cost effective siren that provides differentiated audible and visual alerts in the case of fire, carbon monoxide, burglary and flood events. In addition to providing a loud audible alert, the PG9901 also contains a built-in high-power white strobe light providing a visual alert of the event.
With its sleek and modern design, the PG9901 will fit most internal spaces.
Features:
- Visible link quality indicator on device
- 110dB Siren with Strobe Light
- Differentiated audible alerts for intrusion and fire
- Prolonged battery life (8 years with typical use)
- Dimensions: 161 x 161 x 50mm (6.44 x 6.44 x 1.75in)
- For sensing things that open or separate
- 3 total zones. Each with separate ESNs
- Main reed switch + magnet
- 2 supplemental hardwire zones
- Outer terminal
- Inner terminal
- Cover tamper
- Strong, reliable RF signal
- 10-15 year battery life on CR123A battery
- Low Battery indication
- UL217 and ULC531 listings
- Smoke and heat detection
- 5-year warranty
