S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
- Transmits power at the full FCC limits, maximizing range
- Support for an external contact
- 1-inch magnet gap
- cover tamper
- 6+ year battery life
The PG9984P Wireless PowerG Dual Technology Motion detector combines advanced PIR detection algorithms with K-band microwave detection to dramatically reduce false alarm events even in harsh installations. The PG9984P sends an alarm signal after both the PIR and the microwave sensors have detected an intruder, significantly reducing false alarms.
The PG9984P uses a combination of elliptical parabolic mirror optics. An innovative mirror with extremely high optical gain delivers an extended range and provides superior detection sensitivity.
The PG9984P also applies a digital temperature compensation that allows the detector to continuously adjust its sensitivity according to the location temperature. In this way, the PG9984P is able to detect an intruder even when the ambient temperature is close to that one of the human body.
Finally, the PG9984P uses an obsidian black mirror technology. A unique, nickel-based, obsidian-like, reflective surface acts as a selective optical filter of infrared energy. In this way, the PG9984P can virtually eliminate white light interference and increase detection sensitivity.
Features:
- Visible link quality indicator on device
- Vandal-resistant design
- Dual Technology PIR and K-Band Microwave frequency to reduce false alarms
- Dimensions: 115 x 60 x 48mm (4.5 x 2.3 x 1.9in)
- Panel remote uploading/downloading via Internet
- Programmable using DLS 5 or keypad
- Supervision heartbeat via Internet
- 128 Bit AES Encryption
- Full event reporting
- SIA and Contact ID protocol
- Visual verification over Internet
- Communicator can be housed in separate cabinet using PCL-422 Communicator Remote Mounting Module
- R model includes RS232 serial integration option
- E model provides expanded user support and up to 4 ethernet integrations with PowerSeries Neo panels V1.2 and higher
- UL217 and ULC531 listings
- Smoke and heat detection
- 5 year warranty
The IQ Carbon is a monitored detector ensures your home stays safe from dangerous invisible carbon monoxide gas. Connecting directly to the IQ panel, this device is operating 24-7, whether your system is armed or not, and can inform you if any danger is present in your home.
- Especially useful in homes with high risk of carbon monoxide leaks from appliances such as stoves, furnaces, and more.
- Monitoring for carbon monoxide gas 24-7
- Test button to ensure device is operating correctly
- Built-in alarm sounds in addition to panel siren
- Causes panel to emit fire tone and alerts monitoring station of carbon monoxide
- Power Source: One 3-volt CR123A Panasonic Lithium Battery (included)
- Audible Signal (temp 4 tone): 85 dBA min. in alarm (at 10ft (3m))
- Operating Current: 10 μA
- Temperature Range: 40°F (4.4°C) to 100°F (37.8°C)
- Operating Humidity Range: 15% to 95% Relative Humidity, non-condensing
- Pending Agency Listings: UL standard 2075, UL 2034 and CSA 6.19-01
Features
- Durable, scratch-resistant buttons
- 4 programmable function keys
- Long-life lithium batteries included
- Full 3-second delay on panic alarm to reduce false alarms
- Multifunction belt clip included
- Reliable 433 MHz technology
- Optional generic rubber insert included
- Water resistant
Adds 16 hardwired zones (EOL resistor supervised) to the M1 Gold or M1EZ8 Controls. Operates from 4-wire data bus. Up to 12 of these can be used, increasing total zones (inputs) to 208.
Includes:
- 16 Zone Input Expander
- ELK-SWG Circuit Board Mounting Glides 2/pack
- 18 2200 Ohm Resistors
- Instructions
- 16 EOL Resistor Supervised Hardwire Zones
- Operates on the 4-Wire Data Bus
- DIP Switch Address Settings
- Flash Memory for Firmware Updating
- Plug-In Terminal Strips
- Status and Diagnostic LED
- On-Board EOL Bus Termination Jumper
- Vertical Mounting using ELK-SWG Glides(included)
- Inputs: Plug-In Terminals with Elevator Style Wire Clamps and Screws
- Operating Power Range: 9 to 14 VDC
- Current Draw: 65 mA
- Size: 6 in. x 3.25 in. x .75 in. H
- Delivers 360° motion detection from a ceiling-mounted device
- Fully secures small to mid-sized rooms with detection coverage of up to 10m (32.8ft) in diameter
- Ensures reliable performance using built-in PowerG leading-edge wireless intrusion technology with two-way communication
- Minimizes visual impact, with a modern, unobtrusive design
- Offers long-lasting value with a 5-year battery life (typical use)
- Simple to install and maintain
The PG9945 is designed to communicate with the security system to report openings and closings of doors & windows. Known for its versatility and reliability, the PG9945 is an easy to install device ideal for a wide range of environments.
The PG9945 PowerG Door/Window Contact is equipped with a visible link quality LED indicator on the contact that lets the installer choose the optimal location for installation, eliminating the effort of going back and forth to the keypad. Additionally, device configuration is quick and easy with no hardware switches or need to re-open devices. All device configuration settings are handled on the system keypad.
Features:
- Selectable operation of auxiliary input as NO, NC or EOL supervision
- Visible link quality indicator shown on device
- Case and wall tamper
- Available in either white (PG9945) or brown (PG9945BR) to blend into any décor
- User-selectable operation of auxiliary input as NC or EOL
- Prolonged battery life (8 years with typical use)
- Back tamper switch options
- Dimensions: 81 x 32 x 25mm (3.19 x 1.25 x 1in)
- Certified with ULC Wireless Commercial Burglary Listing under ULC-S304-16 Standard
S2K Administration - Form Template Display
Actions