S2K Commerce - Products Dropdown
S2K Commerce - Shopping Cart
S2K Commerce - Order Entry
- Can be easily mounted on doors or windows with included adhesive
- Alerts IQ Panel if moved more than 1"
- Can be programmed as "Safety Sensor" for medicine cabinets, chemical storage, safes or storage closets
- Using Alarm.com you can get a text if your door or window is left open
- Create automation rules like "turn on light when door is opened" or "adjust thermostat if window left open"
- Requires two (2) 3V CR2032 Batteries
- The built-in tamper switch triggers an alert if the cover is removed
- Create custom names for each sensor, determine unique chime type, choose voice prompts on or off
- Sensor: 2.25"H x 1"W x .5"D
- Wireless signal range: 600ft (200M), open air.
- Code outputs: tamper, tamper restore, alarm, alarm restore, low battery.
- Transmitter frequency: 319.5 MHz
- Unique code ID
- Supervisory keep-alive interval: 70 minutes.
- RF Peak field strength: typical 36000 uV/m at 3m
- Operating Temperature: -10C~50C Relative Humidity: 5-95% Non-Condensing Storage Temperature: -40-80C
- Replace battery with exact replacement every 5 years with 3V Lithium (x2).
The RB1000 is a low-current Form-C relay that will provide an additional dry contact output when connected to an "3" output lug on a Napco control panel. This relay may be used to drive a siren or strobe light, trip a long-range wireless radio, activate access control dvices, etc.
Includes 64 zone self contained wireless alarm system with CP-01 software and built-in two-way voice, a 7.2V NI-MH battery, high efficiency transformer, telephone jack and cord and English user and installation manuals.
The WIS100 Wired Siren is an optional add-on for a W Series control panel (WIP620, WIP630) and can serve as an alternative to the SE601 Wireless Siren. The WIS100 siren can be attached to the W panel using a plastic joint or detached from the panel and mounted in a different location (maximum wire length: 49 ft.).
Features: