Home  >  INTRUSION  > (x)
|◀ ◀ 8389 - 8399 of 8399 ▶ ▶|
View:

HD Automation Relay, DPDT, 60A Contacts, 110VAC Input

The ELK-9200 is a Heavy Duty Relay/Contactor inside a lockable metal enclosure. It is designed for remotely controlling high current devices such as electric water heaters, pumps, motors, gates, etc. The energizing coil of the 9200 is 110 VAC, however its relay contacts are capable of switching 220 VAC at up to 30 Amps of current.
  • Pre-Wired Terminal Lugs for easy Installation. 
  • 110 VAC Plug Cord for Energizing the Relay Coil 
  • Heavy Duty "Lockable" Metal Enclosure
  • 30 Amp Long Life Double Pole Relay Contacts. 
  • Relay Suitable for a 110 VAC or 220 VAC Load 
  • Ideal for Water Heaters, Motors, Pumps, etc. 
  • Operating Coil Voltage: 110 VAC 
  • Coil Current Draw: less than 35 mA
  • Contacts Rated for: 30 Amps AC maximum 
  • Metal Enclosure Size: 12" x 12" x 3.375" * Not suitable for wet locations. 
  • Color: White
Item#:
9200
You must be logged in to order this item. Log in here

Alarm Communicator with Serial Port Interface *Candian Veris

Item#:
5530M-CN-SER
You must be logged in to order this item. Log in here

JascoPro Series Matter In-Wall WiFi On/Off Paddle Switch, Em

Item#:
81919
You must be logged in to order this item. Log in here

GE 3-Outlet Polarized Extensio n Cord, 9ft, Indoor, Safety Co

Item#:
51947
You must be logged in to order this item. Log in here

Deluxe Swivel Mnt. Bracket for ELK-6030 PIRs

Item#:
603022
You must be logged in to order this item. Log in here

Wireless PIR Motion Sensor with Security/Cenveiniece Light

Works with the M1 control along with the ELK-M1XRFTW Two-Way Wireless Transceiver. Intended to be used in residential and light commercial installations, the PIR incorporates advanced features designed to ensure reliability, ease of installation, and provide innovative security enhancements.
To simplify installation, ELK's Wireless PIR Motion Sensor allows the installer to remotely enable/disable Walk Test Mode from a keypad. Until now, the industry has accepted the process of manually tripping a switch on a one-way wireless PIR to enter walk test mode. The bright high-intensity white LED convenience/security light clearly identifies when the sensor is detecting motion.
Includes:

  • Wireless PIR Sensor
  • 2 Replaceable 3V Lithium battery
  • Standard Swivel Bracket and Locking Disc
  • Blanking Plug
  • 2 Plastic Anchors
  • 2 #6 Pan Head Sheet Metal Screws
  • Plastite #3 x ¼ in. screw
  • #4 x 3/8 in. Pan Head Sheet Metal screw
  • Instructions
Features:
  • Ease of installation with keypad initiated walk test
  • Industry First Security/Convenience Bright White LED with:
    • Momentary motion activation during walk test mode
    • Flashing during audible alarm activation
    • Programmable "on" activation through M1 Rules
      • Illuminate an area for camera assistance during event
      • Temporary night path lighting
  • Long battery life and 2 selectable sleep mode durations
Item#:
6030-ELK
You must be logged in to order this item. Log in here

GE LED Night Light, Motion-Sen sing, Dimmable, Louver Shade,

Item#:
67551
You must be logged in to order this item. Log in here

JascoPro Z-Wave Water Leak Sen sor, Detachable Probe, 800SWB

Item#:
81018
You must be logged in to order this item. Log in here

Jasco Z-Wave Plus Plug-in Smar t Switch, Dual Plug, Passthrou

Item#:
76724
You must be logged in to order this item. Log in here

Money Saving 20 Pack - Low Battery Cutoff & Master Power Switch

The ELK-965 is a Low Battery Cutoff Module combined with a Master Power Switch. It is designed to work with virtually any 12 Volt control panel or power supply. In the event of an extended power outage, the ELK-965 sensing circuit automatically disconnects the battery when the voltage falls below 10 Volts DC. This helps to prevent "deep discharging" of the battery. The convenient power switch permits the installer or user to easily disconnect both the Battery and the AC power from the control or power supply.
Includes:

  • 20 Low Battery Cutoff & Master Power Switches
  • 40 pieces of Double Sided Tape
  • Instructions
Features:
  • Works With Any 12 Volt Control Panel
  • Automatic Low Battery Cutoff Protects Battery From Deep Discharge
  • AC and Battery On / Off Power Switch
  • Visual LED Power Indicator
  • Installer Friendly - Small Compact Size
  • Includes AC Wires & Battery Leads
  • Fits Standard Snap Track
  • Includes Double Sided Mounting Tape
  • Lifetime Limited Warranty
Specifications:
  • Relay Contacts: Form "C", 7 Amp @ 28 VDC
  • On / Off Power Switch: DPDT Slide Type
  • AC Power Leads: 18 AWG, 18" Length
  • Maximum Transformer Size: 18 VAC
  • Battery Leads: 18 AWG, 18" Length
  • Low Battery Cutoff Voltage: ~ 10 VDC
  • Size: 1.75 in. X 2.185 in.(44.5mm X 55.5mm)
Item#:
965B20
You must be logged in to order this item. Log in here

Ajax TurretCam (8 Mp/4 mm) (8E U) ASP white

Item#:
64929.197.WH1
You must be logged in to order this item. Log in here
|◀ ◀ 8389 - 8399 of 8399 ▶ ▶|
View:
(Denotes required field.)