S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
- Affordable All-in-One
- 8 Core Processor, LTE & Wi-Fi Dual Path, 7" Touchscreen
- Choose Your Version
- PowerG or S-Line or Interlogix or 2Gig or DSC or Honeywell
- Automation
- Z-Wave 800, lights, locks, thermostats, garage doors
- Video
- Live View, Live Answer doorbell & cameras on screen
- Bluetooth
- Touchless disarming music streaming
- Easy Installation
- SmartMount, Install Wizard, on-screen diagnotics & more
- Compact, Low cost, and easy to use.
- Does not discharge or damage the battery.
- Analyzes 12 Volt Rechargeable Batteries.
- Warns if battery voltage is too low.
- Replaceable test leads.
- Includes Padded Carrying Case.
- Includes Self-Adhesive Test Data Labels.
- Lifetime Limited Warranty
- Numeric LED display shows battery voltage, and Mhos reading.
- Operating Voltage: 10V - 14 Volts D.C.
- Current Draw: 1.1 Amps Max., 0.0016Ah for full test
- Battery Leads: ~12 Inches
- Enclosure Size: 4.4 W x 3 H x 1.15 D (111.8mm x 76.3mm x 29.2mm) w/o carrying case
The CX-702 is designed to give extremely stable long-range detection performance in a variety of internal commercial and industrial applications. With patented Multi-Focus technology, sensitivity is maintained through the entire coverage area, even in high temperature areas or in applications with low temperature contrast. Combined with Double Conductive Shielding and Temperature Compensation, a high level of false alarm protection is guaranteed. In addition, a unique feature to the CX-702 is the ability to choose between a 70' x 70' pattern and a 150' x 8' with a simple flip of the lens.
Features:
GEM-RECV32 will accommodate up to 32 wireless zones. The receiver is connected to the control panel's 4-wire bus. The receiver monitors each transmitter, updating transmitter status as reports are received, and conveys this information to the control panel. Also monitored is the elapsed time since the last report from each transmitter. If no report is received within a programmed time, a Supervisory Failure will result.
To enroll the DWS-LL, begin by placing the panel into wireless enrollment mode and then sending an enrollment signal from the LongLife sensor. Alternatively, the LongLife sensor can be enrolled by scanning its bar code using the Alula app or by entering its 8-character serial number on the interactive GeoArm web portal.
To install the DWS-LL, begin by removing the adhesive paper and adhering the LongLife contact and magnet on a door or window. Clean the surface of where you plan on mounting it. Leave a minimum of 3/16 inch clearance around the ends of the sensor to allow the cover to open. Make sure to align the alignment marks on the LongLife and magnet when mounting. Alternatively, LongLife can be used with an external contact instead of the reed switch.
The High Bond Tape (3M VHB Tape) works great if the surface is properly prepared and firm pressure is applied for over 10 seconds. The LongLife wireless performance is optimized when mounted near the top of the door in a vertical orientation.
- Low-profile design
- Easy, slide-open cover
- Battery pull-tab enrollment
- 5-year product warranty
- 10-year battery life (replaceable)
Contains one HS2032NK control panel in a PC5003C cabinet, one HS2LCD Full Message LCD Hardwired Keypad, a BD7-12 12V, 7Ah battery, a PTD1640U standard efficiency transformer and a SD15WULF indoor siren.
Each DS9370 Series TriTech PIR/Microwave Motion Detector model is panoramic and uses several patented processing techniques to provide excellent catch performance with freedom from false alarms. Each model can be mounted on ceilings as high as 7.6 m (25 ft). With three separate PIR sections that are fully adjustable, the DS9370 Series provides coverage integrity at all mounting heights, plus the ability to customize the coverage for specific areas.
Features:
S2K Administration - Form Template Display
Actions