Home  >  INTRUSION  > (x)
|◀ ◀ 253 - 264 of 8406 ▶ ▶|
View:

3.6V 14.5Ah D Size Replacement Battery

3.6V 14.5Ah "D" size replacement battery for PGX901/PGX911 indoor & outdoor sirens.

Item#:
BATT13.0-3.6V
You must be logged in to order this item. Log in here

50x50 Wireless PIR with 40lb Pet Protection

Features:

  • 50 x 50 ft. range
  • 40 lb. pet/animal immunity
  • Signal selective processing
  • Auto-temperature compensation
  • EMI/RFI protected with fully-shielded SMD circuitry
  • Battery-saver feature.
  • Includes lithium batteries and mounting screws.

Item#:
GEM-PIRPET
You must be logged in to order this item. Log in here

Z-Wave Remote Control Module for home control, including se

Item#:
IBR-ZREMOTE
You must be logged in to order this item. Log in here

IQ5 Hub, PowerG 915, Verizon

Item#:
IQH5017
You must be logged in to order this item. Log in here

Blue Line Gen2 PIR 40 Ft. x 40 Ft. - Pet Friendly Selectable

The Blue Line Gen2 PIR Motion Detectors (ISC-BPR2) use two Fresnel lenses designed to produce sharplyfocused images throughout the field of view providing superior response to intruders. These lenses provide a high density (77 zone) 7layer pattern, and the selectable lookdown lens provides an additional three lookdown zones. Easy installation and flexible mounting options provide state-of-the-art detection. The petfriendly (-WP) generates alarm signals for human intruders without generating false alarm signals for pets.

Features:

  • Wall to Wall coverage  Superior catch performance within 12 m x 12 m (40 ft x 40 ft) coverage area
  • Petfriendly Selectable model available  optimize installation for pet (20 kg [45 lb]) and nonpet applications
  • Dynamic Temperature Compensation  superior catch performance in any environment
  • Flexible Mounting Height, No Adjustments  reduce installation time and false alarms, improve catch performance
  • Self-locking Enclosure with Integrated Bubble Level  reduce installation time

Item#:
ISC-BPR2-WP12
You must be logged in to order this item. Log in here

Int Siren, programable/custom tones, 700 series, battery bac

Item#:
ISZW7-ECO
You must be logged in to order this item. Log in here

Long Life Door/Window

The Alula DWS-LL is an encrypted, LongLife, wireless door or window sensor designed to be used with the Alula Connect+ Panel. The DWS-LL sensor detects opening and closings of doors and windows. It can secure just about anything that opens with its simple peel-and-stick mounting solution. The DWS-LL will alarm, when the Connect+ Panel is armed and the magnet is pulled away from the contact.

To enroll the DWS-LL, begin by placing the panel into wireless enrollment mode and then sending an enrollment signal from the LongLife sensor. Alternatively, the LongLife sensor can be enrolled by scanning its bar code using the Alula app or by entering its 8-character serial number on the interactive GeoArm web portal.

To install the DWS-LL, begin by removing the adhesive paper and adhering the LongLife contact and magnet on a door or window. Clean the surface of where you plan on mounting it. Leave a minimum of 3/16 inch clearance around the ends of the sensor to allow the cover to open. Make sure to align the alignment marks on the LongLife and magnet when mounting. Alternatively, LongLife can be used with an external contact instead of the reed switch.

The High Bond Tape (3M VHB Tape) works great if the surface is properly prepared and firm pressure is applied for over 10 seconds. The LongLife wireless performance is optimized when mounted near the top of the door in a vertical orientation.

Product Features:
  • Low-profile design
  • Easy, slide-open cover
  • Battery pull-tab enrollment
  • 5-year product warranty
  • 10-year battery life (replaceable) 
Item#:
DWS-LL
You must be logged in to order this item. Log in here

IQ Pro panel in plastic enclos ure. Supported frequencies: 91

Item#:
IQPR017P
You must be logged in to order this item. Log in here

PowerSeries Pro HS3032BASE with HSC3010C Cabinet, HS2LCD N Keypad, ACCK3 Accessory Kit and HS65WPSNA Power Adaptor

Item#:
HS3032-NAKIT1
You must be logged in to order this item. Log in here

Alarm.com VDB775 Wedge Mount K it (ADC-VDBA-775-WMK). The kit

Item#:
ADC-VDBA-775-WMK
You must be logged in to order this item. Log in here

NEO Control Panel Kit

Contains one HS2032NK control panel in a PC5003C cabinet, one HS2LCD Full Message LCD Hardwired Keypad, a BD7-12 12V, 7Ah battery, a PTD1640U standard efficiency transformer and a SD15WULF indoor siren.

Item#:
HS32-51
You must be logged in to order this item. Log in here

PowerSeries Pro/NEO Wireless Full Message LCD PowerG 2-Way Wire-Free Keypad

Compatible with HS2016, HS2032, HS2064 and HS21218 control panels. *Note - Only keypad version 1.4 or higher is compatible with PowerSeries Pro.
Item#:
HS2LCDWF9ENG N
You must be logged in to order this item. Log in here
|◀ ◀ 253 - 264 of 8406 ▶ ▶|
View:
(Denotes required field.)