S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
The IQ Smart Socket is a dual Z-Wave outlet that allows you to control two devices simultaneously, and get real-time energy usage on the screen of both the device and the IQ Panel. Get energy reporting over time on both your mobile device and desktop computer to help you identify usage trends and potentially save energy. Create smart rules like "Turn on lamp automatically in the evening" or "Turn off space heater when I leave home" for intelligent automation, security and energy savings.
- Control up to two outlets independently
- See real-time energy usage from the device or from your IQ Panel
- Get historical energy reports
- Assign custom names to your devices
- Create custom schedules to activate devices automatically
- Display energy usage in Watts or Kwh
- Operation Frequency: 908.42 (USA)
- Modulation: BFSK/GFKS
- Bandwidth: 9.6 Kbps with a raise to 40Kbps fully interoperable
- Range: Indoor (30m), "open air" condition (100m)
- Operating Temperature: -35°C - 120°C
- Device Activated Time: 5ms
- Total Nodes in one Network: 232
Item#:
QS-2100-P01
You must be logged in to order this item.
Log in here
- External omnidirectional antenna (passive)
- Enhances cellular signal (effective in low coverage area)
- 15 ft cable length, RP-SMA male connector
- Bracket for easy installation
- Do not require any external power
- Compatible with VOSKER mobile cameras
Take advantage of an enhanced signal by combining the V-ANT01 cellular antenna to your cellular camera. Suitable for the V100 & V200 camera models.
Ideal for low cellular coverage areas, the V-ANT01 has a 15' long wire.
Easy to install with the metal bracket included in the box.
Item#:
V-ANT01
You must be logged in to order this item.
Log in here
The ELK-M1KP is an addressable LCD Keypad for the M1 Cross Platform Controls. It features a 32 character back lighted display with adjustable intensity and extra large character fonts for ease of readability. The M1KP includes a plug-in connector on the back for adding an internal proximity reader (ELK-M1PR) or for interfacing to virtually any external 26 bit Wiegand compatible proximity reader. Proximity cards/fobs can be used for touchless arming, disarming, door strike control, etc.
Includes:
- LCD Keypad with Green Display
- 1 each Multicolor & Quick Reference Labels
- 4 #6 Flat Head Phillips Sheet Metal Screw
- 1 2200 Ohm Resistor
- 5 Gel Filled B-Connector
- 1 Mini Jumper
- 6-wire Flying Lead Cable Assembly
- Instructions
- Large, Easy to Read Characters
- Back lighted with Adjustable Intensity
- Removable Hinged Door
- Unique Menu Navigation/Direction Keys
- Operates on 4-Wires (M1 Data Bus)
- Built-in Speaker with Adjustable Beep Tone and Volume
- Accepts Plug-in Proximity Card Reader (Optional)
- Input for 1 Supervised Zone
- One Programmable Voltage Output
- Exit, Stay, Chime, and Bypass Keys
- Input Connection: 6 Pin Plug-in "Flying Lead" Connector Included
- Proximity Connection: 5 Pin Plug-in "Flying Lead" Connector (optional ELK-WO35A required for external proximity reader)
- Color: Glacier White
- Operating Voltage: 13.8 VDC
- Current Draw: 40 - 50 mA Idle (low back light level, sounder silent)
- 160 mA Fully Active (max. back light & sounder active)
- Size: 6.875" W x 5.25" H x 1.375" D
Item#:
M1KP
You must be logged in to order this item.
Log in here
The USB2100 USB 2.0 to 10/100 Mbps Network Adapter lets you add a Fast Ethernet port to your laptop or desktop computer through USB.
This compact USB network adapter offers a dongle design with a built-in cable to avoid cramped connections, making it a perfect solution for adding wired Ethernet connectivity to your desktop without opening the case, or to replace a failed onboard network adapter on your laptop system.
Providing half or full-duplex operation, this USB 2.0 Ethernet adapter supports data transfer rates of up to 200 Mbps. The adapter also supports features such as Wake-on-LAN (WoL) and VLAN tagging for added flexibility.
- 10/100 Mbps Ethernet through USB 2.0
- IEEE 802.3i and 802.3u (10BASE-T, 100BASE-TX) compatible
- Supports half / full-duplex operation
- Crossover Detection & Auto-Correction (Auto MDIX)
- IEEE 802.1Q VLAN Tagging support
- Dongle with integrated USB cable
Item#:
USB2100
You must be logged in to order this item.
Log in here
S2K Administration - Form Template Display
Actions
(Denotes required field.)