The CRF-300 Addressable Relay Module provides the system with a dry-contact output for activating a variety of auxiliary devices, such as fans, door holders, dampers, control equipment, etc. Addressability allows the dry contact to be activated through panel programming, on a select basis. LiteSpeed is a communication protocol developed by FireLite Engineering that greatly enhances the speed of communication between analog intelligent devices. Intelligent devices communicate in a grouped fashion. If one of the devices within the group has new information, the panel CPU stops the group poll and concentrates on single points. The net effect is response speed greater than five times that of other designs.

Features

• Built-in type identification automatically identifies these devices to the control panel.
• Internal circuitry and relay powered directly by two-wire SLC loop.
• Integral LED blinks green each time a communication is received from the control panel and turns on in steady red when activated.
• High noise immunity (EMF/RFI).
• Wide viewing angle of LED.
• SEMS screws with clamping plates for wiring ease.
• Direct-dial entry of address: 01 159 for MS-9600(A) series

The BG-12 series from Fire-Lite Alarms is a cost-effective, feature-packed, non-coded series of manual fire alarm pull stations. They offer a variety of different models including single- and dual-action versions. The BG-12 series were designed specifically for use in multiple applications and offer the flexibility to meet the needs of both the installer and end-user.

MS-5UD-3 is a five zone conventional fire control panel has features normally found in more expensive addressable systems. The MS-5UD-3 is fully programmable via built-in keypad and 80 character LCD display, so you do not need an external programmer. The five zones panel has a built-in Digital Alarm Communicator Transmitter (DACT) and availability to add optional equipment: Remote annunciator, Relay module, LED Driver module, Transmitter module and Printer interface module.

Features

• Five-zone Style B (Class B) or Five-zone Style D (Class A) with optional module
• Four NAC Circuits Style Y (Class B) or Four NAC Circuits Style Z (Class A) with optional modules
• Built-in NAC synchronization for System Sensor, Wheelock, Gentex, Faraday and Amseco devices
• Integral 80 character LCD display with backlighting and keypad
• Annunciator bus supports up to 8 devices, including ANN-80 LCD Remote Annunciator, ANN-S/PG remote serial or parallel printer gateway, ANN-RLY, 10 form C relay board, ANN-LED Zone annunciator and ANN-I/O LED driver board for graphic annunciators
• Built-in two-line digital communicator for off premises monitoring
• Three Form-C programmable relays
• 3.0 amps total usable current

Features

• 12 and 24V operation
• High and low volume settings
• Temporal and non-temporal tones
• Mounts to single gang back box
• Compatible with MDL sync module
• Mechanically and electrically compatible with PA400 series Mini-Alert sounders
• Listing for ceiling or wall mounting