S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Altronix T1RV3F4 rack kit is pre-assembled and consists of Trove1M1R enclosure/backplane with factory installed Altronix power supply/charger and sub-assemblies. This kit also accommodates various combinations of HID VertX® boards for up to six (6) doors in a single enclosure.
Power Supply (eFlow6NB):
Input
- Voltage: 120VAC, 60Hz, 3.5A max.
- Fusing: 5A / 250V.
Output
- Voltage: Factory set at 24VDC.
- Current: 6A continuous.
- Maximum Supply Current for Main and Aux. Outputs on eFlow6NB Power Supply board, PDS8 Power Distribution Module’s and ACM4 Access Power Controller’s outputs is 5.6A.
- Auxiliary: Class 2 power-limited @ 1A (unswitched).
- Other: Overvoltage protection. Filtered and regulated.
Battery Backup
- Built-in charger for sealed lead acid or gel type batteries (if batteries are required, install separate battery enclosure RE2).
- Automatic switch over to stand-by battery when AC fails.
- Zero voltage drop when unit switches over to battery backup (AC failure condition).
Fire Alarm Disconnect
- Supervised: Latching or non latching.
- EOL: 10K Resistor.
Supervision
- AC Failure: Form “C” contacts.
- Battery: Form “C” contacts.
- Low DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 70-75% for 24V units. Prevents deep battery discharge.
Indicators LED
- Input: 120VAC is present.
- DC Output: Powered.
- Battery: Discharged or not connected.
Access Power Controller (ACM4):
Input
- Voltage: 24VDC from eFlow6NB.
- Fusing: 10A / 250V.
Output
- Voltage: 24VDC.
- Four (4) independently controlled 2.5A outputs:
- a) Four (4) Fail-Safe and/or Fail-Secure power outputs.
- b) Four (4) dry form “C” 5A rated relay outputs.
- c) Any combination of the above.
- Four (4) auxiliary power outputs (unswitched).
- Fuses Rating: 3A / 32VDC.
Indicators (LED)
- Red LEDs: Outputs are triggered (relays energized).
- Blue LED: FACP disconnect is triggered.
Power Distribution Module (PDS8):
Input
- Voltage: 24VDC from eFlow6NB and 12VDC from VR6.
- Fusing: 10A / 250V.
Output
- Voltage: 12 or 24VDC individually selectable.
- Fuses Rating: 3A / 32VDC.
Indicators (LED)
- DC Output: Eight (8) individual output LEDs.
Item#:
T1RV3F4
You must be logged in to order this item.
Log in here
Includes: both enclosures, NXT-3R reader, PSC-35 power supply, (3) NXT-C,(2) NXT-AP, works with VisualDoors only
- Economical mini-controller for a single door
- Works exclusively with Keri’s Visual DoorsTM software
- Networkable via RS-485 for up to 8 controllers
- Supports Keri NXT and NXT-E readers
- Capable of In/Out access using Keri’s a NXT-E reader in conjunction with a standard NXT reader
- 1000 credential capacity
- 4000 Event buffer (offline)
- Equipped with dedicated inputs for REX & Door Sense
- Form "C" Relay for door control
- Configurable for: Lock Time, Auto Unlock by time
- 8 Access Groups configurable per credential
- Same small footprint as Keri’s Intelliprox BlueTM and sharing the same enclosure
Item#:
NEUT-3R-KIT
You must be logged in to order this item.
Log in here
This item has been discontinued and replaced by item
293
Item#:
0-219000
You must be logged in to order this item.
Log in here
Altronix Trove1M1R accommodates various combinations of Mercury boards with or without Altronix power supplies and accessories for access systems.
Trove1R rack mount enclosure with TM1R backplane
Trove1R rack mount enclosure with TM1R backplane
Accommodates various combinations of Mercury boards with or without Altronix power supplies and accessories for access systems.
- Up to four (4) EP1502, MR52, MR16IN or MR16OUT.
- Up to two (2) EP2500 or MUX8.
- Up to two (2) EP1501 or MR51e.
- Up to two (2) MR50.
- Altronix Power Supplies;
- Altronix Sub-Assemblies.
- Includes Altronix Trove1R Rack Enclosure and one (1) removable TM1R backplane.
Trove1R Enclosure
- 16 Gauge black powder coated steel enclosure with ample knockouts for convenient access.
- Includes: tamper switch, cam lock and mounting hardware. Modular 2U standard EIA 19” drawer with extendable slides up to 48”.
- IEC320 connector.
- Included Z Bracket facilitates ease of wiring.
Item#:
TROVE1M1R
You must be logged in to order this item.
Log in here
S2K Administration - Form Template Display
Actions
(Denotes required field.)