|◀ 1513 - 1524 of 2373 ▶|
View:
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

Trove1C1 accommodate various combinations of CDVI boards with or without Altronix power supplies and accessories for access systems.

Trove1 enclosure with TC1 Altronix/CDVI backplane
Backplane accommodates a combination of CDVI Atrium controllers with or without Altronix accessories:

  • CDVI Atrium A22
  • Altronix Power Supplies
  • Altronix Sub-Assemblies
  • Includes Altronix Trove1 Enclosure and one (1) removable TC1 backplane
Trove1 Enclosure
  • 16 AWG grey enclosure with a single 1.5 in. center knockout on the top of the enclosure plus (9) 2-Stage knockouts for 0.75 or 1 in. conduit.
  • Includes: One (1) cam lock, one (1) tamper switch and mounting hardware.

Item#:
TROVE1C1
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
  • Connect to the outside of an alarm bell box for external high intensity notification
  • Fully epoxied weatherproof (IP66) and vibration-resistant design for external or internal use
  • Up to 100,000 hours of continuous use
  • 19 Built-in programmable flash patterns
  • Up to 15 units can be synchronized to flash simultaneously or alternately
  • Multi-voltage input: 10~30VDC
  • Non-volatile memory recalls last flash pattern used at power-up
  • Surface mounting or flush mounting
Item#:
SL-1311-MA/B
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

Features

  • Over-current protection, over-voltage protection, and reversal protection for the power supply and all of the input and output terminals
  • Reliable network system of controllers using either TCP/IP or RS-485 Serial communication
  • Supports different Wiegand formats, and connects to ZK readers as well as HID, Mifare, and generic ID card readers
  • Connects with a variety of electric locks, sensors, exit buttons, alarm devices, and indicators.
  • Can be integrated with other security systems such as CCTV, Intrusion Detection, Fire Alarm Release, and elevastor Control for total security system. Directly compatible with ZKs biometric reader controllers.
  • Easy-to-use and intuitive programming with ZKAccess Software
  • System management by browser from client PCs. No need to install software on each client
  • Programming of special logic between doors is set up with simple pull down menus. No special scripts or code is required.
  • Management software allows indication of real-time door status and remote commanding of door open/close state. Alarm conditions such as forced open and extended open alarms are reported
  • Advanced access control capabilities are built into the hardware, including anti-passback, Dual and multi-Card Authentication, and Duress Mode.

Item#:
US-C3-400
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
|◀ 1513 - 1524 of 2373 ▶|
View:
(Denotes required field.)