S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
- Split series installation for added security – keypad and controller are separate thereby preventing access via keypad tampering
- 12~24 VDC Auto-adjusting operation
- Up to 1,000 possible user codes (000~999) and/or proximity cards for output #1, 100 (001~100) for output #2, 100 (001~100) for output #3
- Up to 50 (01~50) possible temporary visitor codes, which can be programmed for one-time or limited-time use (1~99 hours)
- Output #1: Form C relay, 5A@24VDC max.
- Output #2: Form C relay, 1A@24VDC max.
- Output #3: Form C relay, 1A@24VDC max.
- Outputs #1, #2, and #3 can be programmed to activate for up to 99,999 seconds (nearly 28 hours)
- Tamper output: N.C. Dry contact, 50mA@24VDC max.
- Keypad illuminates when a button is pressed; backlight can be programmable for FULL or AUTO in standby mode
- Built-in door chime
- Built in current limited (750mA) power source for keypad for added security
- Keypad active, alarm, duress, and interlock output: Transistor ground, 100mA@24VDC max.
- Keypad mounts to a standard single-gang back box (surface-mount back box included)
- All features are programmed directly from the keypad: No need for an external programmer
- EEPROM Memory protects programmed information in case of power loss
- Up to 50 (01~50) duress codes for output #1, 10 (01~09) for output #2, 10 (01~09) for output #3
- Programmable egress input with optional warning alarm and delayed egress
- Door sensor input for anti-tailgating operation
- Interlocking input for connecting to a second keypad for mantrap applications
- Simple three wire connection between keypad and controller
Item#:
SK-4131-SPSQ
You must be logged in to order this item.
Log in here
This item has been discontinued and replaced by item
PW5K2ENC1
Item#:
PRO22ENC1
You must be logged in to order this item.
Log in here
ENFORCER Power Converters “step down” voltage, converting low-voltage AC or DC into regulated DC outputs. These converters are useful for DC CCTV cameras, access controls, and many other applications where low-voltage DC output is required.
- Three models available, providing varying degrees of low-voltage DC output
- Built-in overload protection
- Regulated and filtered output
- Green LED indicates power input
- Red and Blue LEDs indicate power output
Item#:
ST-LA130-TTQ
You must be logged in to order this item.
Log in here
You must be logged in to order this item.
Log in here
Trove1 enclosure with TSA1 Altronix/SALTO backplane:
Trove1 Enclosure:
Item#:
TROVE1SA1
You must be logged in to order this item.
Log in here
S2K Administration - Form Template Display
Actions
(Denotes required field.)