S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
You must be logged in to order this item.
Log in here
The ENFORCER Elbow RTE Push Plate is designed for easy, accessible entry and exit through public area doors. The Elbow RTE Push Plate features a large button for easy, hands-free operation, a red and green LED status indicator, and two stainless steel faceplates. With an expected operating life of over 100,000 cycles and flexible mounting options, the ENFORCER Elbow RTE Push Plate is the perfect solution for reliable, secure, and accessible entry and exit for schools, hospitals, nursing homes, apartments, and other high-density public spaces.
- Oversized plate for increased visibility and ease of use even when hands are not free
- Low-profile design – only 7/8" (22mm) thick
- Dual-colored LED indicates status (red – standby, green – triggered)
- Outputs rated 1A@30VDC, 0.5A@125VAC
- Operating life: Over 100,000 cycles (factory tested)
- Operating voltage – 12/24VDC
- 2 Faceplates included
- Momentary SPDT switch
Item#:
SD-7098-SKDQ
You must be logged in to order this item.
Log in here
You must be logged in to order this item.
Log in here
Altronix T1MK1F4SD Trove Mercury kit is pre-assembled and consists of Trove1M1 enclosure/ backplane with factory installed Altronix power supply/charger and sub-assemblies. This kit also accommodates various combinations of Mercury boards for up to four (4) doors in a single enclosure. Trove simplifies board layout and wire management, reduces installation time and labor costs.
Power Supply (eFlow4NB):
Input
- Voltage: 120VAC, 60Hz.
- Fusing: 5A / 250V.
Output
- Voltage: 24VDC.
- Current: 4A continuous.
- Other: Overvoltage protection. Filtered and regulated.
Battery Backup
- Capacity: 7AH / 12VDC (Up to 2 within enclosure). 40 AH / 65 AH (requires separate enclosure).
- Type: Sealed lead acid or gel type.
- Fuse: Rating 10A/32V.
- Failover: Upon AC loss, instantaneous.
Supervision
- AC Failure: Form “C” contacts.
- Battery: Form “C” contacts.
- Low DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge.
- Input: 120VAC is present.
- DC Output: Powered.
- Battery: Discharged or not connected.
Voltage Regulator (VR6):
Input
- Voltage: 24VDC from eFlow4NB.
Output
- Voltage: 12VDC.
- Current: 6A continuous.
- Other: Surge suppression.
Indicators (LED)
- Input: 24VDC is present.
- Output: Powered.
Access Power Controller (ACM4CB):
Input
- Voltage: 24VDC from eFlow4NB.
- Fusing: 10A / 250V.
Output
- Voltage: 24VDC.
- Four (4) independently controlled 2.5A outputs:
- a) Four (4) Fail-Safe and/or Fail-Secure power outputs.
- b) Any combination of the above.
- Four (4) auxiliary power outputs (unswitched).
Outputs Ratings
- PTCs: 2.5A.
Indicators (LED)
- Red LEDs: Outputs are triggered (relays energized).
- Green LED: FACP disconnect is triggered.
Dual Input Power Distribution Module (PDS8CB):
Input
- Voltage: 12VDC from VR6 and 24VDC from eFlow4NB.
- Main Fuse Rating: 10A.
Output
- Voltage: 12VDC and/or 24VDC.
- Any of the eight (8) power outputs are selectable to follow power Input 1 or Input 2.
- Individual outputs may be set to OFF position for servicing.
Outputs Ratings
- PTCs: 2A.
Indicators (LED)
- DC Output: Eight (8) individual output LEDs.
Item#:
T1MK1F4SD
You must be logged in to order this item.
Log in here
S2K Administration - Form Template Display
Actions
(Denotes required field.)