The DTK-MRJPOE is a 10GbE PoE surge protector that is PoE Plus and High PoE ready. This point of use surge protector is compatible with CAT5e, CAT6 and CAT6A cabling infrastructure, and can be installed at the equipment end, or ahead of injecotrs or midspan devices.

• Uses SAD and GDT technologies for superior protection
• Data speeds up to 10GbE without signal degradation
• PoE Plus, HiPoE ready for high-wattage applications

ALTV248 AC Wall Mount CCTV Power Supply provides 24VAC or 28VAC distributed via Eight (8) fuse protected outputs for powering CCTV Cameras, heaters and other video accessories.

• Secondary fuse rated @ 5A/250V.
• AC power LED.
• Power ON/OFF switch.
• Spare fuses provided. (all models w/primary and/or secondary fuses)

Model ALTV2416 provides 24VAC or 28VAC distributed via sixteen (16) fuse protected outputs. ALTV2416220 is a 220VAC Input version of this unit.

• Secondary fuse rated @ 10A/250V.
• AC power LED.
• Power ON/OFF switch.
• Spare fuses provided. (all models w/primary and/or secondary fuses).

Protect AC power and telco/fax lines with DITEK's DTK-8FF eight outlet plug-in surge protector. Accepts up to six transformers at the same time.

• Diagnostic LED indicates ground presence and suppressor function
• UL1283 EMI/RFI noise filtering provides extra protection for sensitive electronics
• Automatic shutdown feature turns off powier in case of suppressor overload

Altronix eBridge100TM EoC hardened transceiver transmits data at 100Mbps, Full Duplex over Coax cable to a paired eBridge receiver and provides power in a PoE/PoE+ compliant format to an enabled device/camera. The eBridge receiver is available in various options and is powered by an external midspan or endspan. The receiver passes PoE/PoE+ power over the same coax cable to the eBridge100TM transceiver, which, in turn, passes this power to an enabled IP camera/device. These plug and play units facilitate a cost-effective, simple way to replace legacy analog products with new IP devices over existing coax up to 300m. When paired with the eBridge100RM EoC Receiver, the eBridge100TM will pass 100Mbps full duplex data and PoE/PoE+ over CAT5e (or higher) up to 500m