S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
- Includes CobraNet® Input
- Compatible with IED GLOBALCOM® systems and 3rd party Dante™ devices
- Dual-redundant Ethernet ports
- 7-band parametric EQ and a high-pass and low-pass filter per channel
- Signal delay up to 40ms on each channel
- Continuous, Real-time Ambient Noise Analysis and Automatic Output Level Control
- Four 600 watt amplifier output channels
- 100-Volt Output
- LED indicators for power, audio signals and faults
- Built-in Automatic Loudspeaker Line Testing detects Ground Faults, Breaks and Changes in Loudspeaker Loads
- Fault reports and amplifier status available over Ethernet using standard SNMP protocol
- Two inputs for ambient noise sensors for each amplifier output channel
Item#:
DNA2404DH
You must be logged in to order this item.
Log in here
The IPCSDTOUCH digital communications station is a fully programmable touch screen user interface device for initiating audio/visual announcements with GLOBALCOM Announcement Control Systems. Each model utilizes an electret condenser cartridge that is positioned in the housing such that its frequency response is enhanced. The microphone element location provides the mechanism for good acoustical coupling to provide a full-bodied, highly intelligible voice signal. The IPSCDTOUCH-G includes a gooseneck microphone.
The IPCSDTOUCH has an auxiliary line level audio input which may be used as a (local) background music source. The station also has a line level audio output which may be used as a zone out.
The IPCSDTOUCH is a network appliance in which each station may obtain its IP address automatically or be assigned a unique IP address which simplifies installation and configuration.
Features
- Dante™ Enabled
- Fully Programmable Touch Screen User Interface
- Provides unlimited selection and initiation of announcements and messages in a GLOBALCOM®.IP System
- Supervision of the Microphone Element
- Handheld, Gooseneck, Surface (Flat) or Desktop (Free Standing) Versions
- Redundant Ethernet Ports
- PoE Powered
Front Panel Features
- Fully Programmable touch screen User Interface.
- Alarm Indicator LED (red)
- Fault Indicator LED (yellow)
- Busy Indicator LED (yellow)
- Ready Indicator LED (green)
Handheld Microphones
The handheld microphone assembly contains an omnidirectional electret condenser microphone cartridge integrated with a microphone preamplifier and an audio line driver. The microphone element and preamplifier are mounted in a teardrop shaped molded black textured Cyclolac™ housing. The use of an omnidirectional element eliminates the proximity effect which creates a boomy sound when a user speaks close to a microphone.
It utilizes a magnet for attachment to the microphone station base assembly and is supplied with a circular coiled cable which is built into the housing assembly. A strain relief is built into the housing end of the cable and locks into the housing. The terminations at each end are molded, 6 wire, RJ25 connectors which provide extra strength and resistance to failure by pull-out.
The cartridge features include a highly efficient electrical specification, pressure type operating principle, low impedance (2.2 kΩ), and high reliability under adverse shock, vibration and other environmental conditions.
Gooseneck Microphone
The gooseneck microphone contains an omnidirectional electret condenser microphone cartridge integrated with a microphone preamplifier and an audio line driver. The microphone element is mounted in the metal windscreen portion of the gooseneck. The preamplifier and line driver are on a PC board mounted inside the base of the gooseneck on an XLR connector. The microphone assembly is a 12” gooseneck with a hard metal windscreen at the top and a 5-pin XLR connector in the base for mounting.
Item#:
IPCSDTOUCH-G
You must be logged in to order this item.
Log in here
You must be logged in to order this item.
Log in here
The IP108-D-CS Announcement Control System (aka ACS) is the heart of AtlasIED's next generation GLOBALCOM®.IP enterprise wide communications management system. It manages the flow of announcements and messages between network endpoints such as digital communication stations, zone controllers, network power amplifiers, IP-based speakers and other types of IP endpoints. Additionally it serves as a gateway for external I/O devices, VoIP telephone systems and analog audio to be incorporated into the ecosystem.
Each model is 'plug and play' ready with GCK application software installed and ready to be easily configured via an intuitive browser-based interface.
The IP108-D-CS model has the ability to interface with external systems via eight (8) built-in logic inputs and eight (8) built-in relay outputs as well as two (2) balanced line level audio inputs.
The IP108-D-CS Controller supports VoIP communications with Audio over Ethernet (AoE) functionality using eight digital channels of Dante™ digital audio transport over the same network infrastructure simultaneously. Our VoIP is Wide Area Network (WAN) enabled allowing communication to be routed across an entire enterprise or to another LAN location.
Features
- Manages dynamic requests for live, delayed and prerecorded messages (simple and assembled).
- Manages record and playback of ad hoc messages.
- Manages text-to-speech messages.
- Manages mute actions (by zone or zone group) and two-way full duplex intercom connections.
- Allows up to 65,565 messages priority levels with NeverMISS™ capability.
- Manages thousands of audio and video output zones over local or wide area networks utilizing a variety of industry standard IP based protocols.
- Initiate announcements by contact closure, paging stations, open standard IP network commands, and the built-in VoIP telephone interface.
- Includes a built-in comprehensive message scheduling system that allows the creation of schedule profiles.
- S.A.F.E™ - Smart Alerts For Emergencies
- LDAP (Lightweight Directory Access Protocol) and Active Directory Supported.
- Built-in interface to VoIP telephone systems via SIP and PBX Trunking as well as support for standard 3rd party FXO gateway devices.
- Supports industry standard G.711, G.722 and RTP protocols.
- Stores up to 250 hours of pre-recorded .wav message files.
- Stores/manages pre-recorded messages in any language.
- Text to Speech messages may be generated in place of prerecorded messages utilizing the default TTS engine or optional multi-lingual TTS engines.
Item#:
IP108-D-CS
You must be logged in to order this item.
Log in here
S2K Administration - Form Template Display
Actions
(Denotes required field.)