|◀ ◀ 1405 - 1416 of 1873 ▶ ▶|
View:

Dual 1G Fiber SFP, 4 port 10/100/1000 PoE/PoE+

Altronix NetWaySP4WP Outdoor PoE+ Hardened Switch provides two (2) 1Gb SFP (Fiber) ports and four (4) PoE+ (30W) or two (2) Hi-PoE (60W) ports, passing data for PoE/PoE+/Hi-PoE compliant devices. Cameras/edge devices may be located up to 100m from the unit. Embedded LINQ Technology allows you to monitor, control and report power and diagnostics from anywhere.

  • Input:
    • Voltage: 115VAC, 60Hz, 2.5A or 230VAC, 50/60Hz, 1.3A.
    • Fusing: 5A/250V.
  • Power Output:
    • Maximum Power Four (4) PoE+ (30W) ports or two (2) Hi-PoE (60W) ports.
    • IEEE 802.3at (30W) and IEEE 802.3af (15W) compliant.
    • 120W total power.
    • Integral surge protection.
  • Fiber Port:
    • Two (2) Gigabit SFP ports.
  • Ethernet
    • Four (4) 10/100/1000 Mbps ports.
    • Connectivity: RJ45, auto-crossover.
    • Wire type: 4-pair CAT5 or better structured cable.
    • Distance: up to 100m.
    • Speed: 10/100/1000 Mbps, half/full duplex, auto negotiation.
  • Battery Backup:
    • (not included)
    • Type: Sealed lead acid or gel type.
    • Failover: Upon AC loss, instantaneous.
  • LEDs
    • Individual PoE On LEDs for each port.
    • Individual IP Link status, 10/100Base-T/active LEDs for each port.
    • ALOS LED indicates fiber connection for SFP port.
    • Heartbeat LED indicates proper operation of the unit.
  • LINQ Technology
    • Remote network management allows for camera/device reset and monitoring.
    • Provides local and/or remote access to critical information via LAN/WAN.
    • Email and trap message notifications report real-time diagnostics.
    • Event log tracks history.

Item#:
NETWAYSP4WP
You must be logged in to order this item. Log in here

Industrial, 4 Gigabit Port, 2 SFP port, 30W, 126W, Optional

Item#:
PS3069AF
You must be logged in to order this item. Log in here

IP55 Bullet 2.4G 802.11N Outdo or WLAN Access Point, IPv6, SN

Item#:
PN-WNAP-6308
You must be logged in to order this item. Log in here

Dual 1G Fiber SFP, 2 ports 10/100/1000 PoE/PoE+

Altronix NetWaySP8B PoE Switch board provides two (2) 1Gb SFP (Fiber) ports and eight (8) PoE+ (30W) or two (2) Hi-PoE (60W) ports, passing data for PoE/PoE+/Hi-PoE compliant devices. Cameras/edge devices may be located up to 100m from the unit. Embedded LINQ Technology allows you to monitor, control, and report power and diagnostics from anywhere.

  • Input:
    • 48-55V UL Listed ITE power supply (up to 120W).
  • Power Output:
    • Eight (8) ports PoE+ (30W) or up to two (2) Hi-PoE (60W) ports.
    • IEEE 802.3at (30W) and IEEE 802.3af (15W) compliant.
    • 115W total power.
    • Integral surge protection.
  • Fiber Ports:
    • Two (2) Gigabit SFP ports.
    • Use with SFP module 1000Base-X (1Gb), compliant to Class 1 laser product (not included).
  • Ethernet:
    • Six (6) 10/100 Mbps and two (2) 10/100/1000 Mbps ports.
    • Connectivity: RJ45, auto-crossover.
    • Wire type: 4-pair CAT5 or better structured cable.
    • Distance: up to 100m.
    • Speed: 10/100/1000 Mbps, half/full duplex, auto negotiation.
  • Battery Backup:
    • Built-in charger for sealed lead acid or gel type batteries.
    • Automatic switch over to stand-by battery when AC fails.
  • Indicators (LED):
    • Individual PoE On LEDs for each port.
    • Individual IP Link status, 10/100Base-T/active LEDs for each port.
    • ALOS LED indicates fiber connection for SFP port.
    • Heartbeat LED indicates proper operation of the unit.
  • LINQ Technology:
    • Remote network management allows for camera/device reset and monitoring.
    • Provides local and/or remote access to critical information via LAN/WAN.
    • Email and Windows Dashboard Alert notifications report real-time diagnostics.
    • Event log tracks history.

Item#:
NETWAYSP8B
You must be logged in to order this item. Log in here

IPv4/IPv6, 28-Port SNMP Manage able Gigabit Switch (24 + 4-Po

Item#:
PN-WGSW-28040
You must be logged in to order this item. Log in here

8PORT MANAGED POE+ MIDSPN 240W s 30W full power per port (240

Item#:
NETWAY8G
You must be logged in to order this item. Log in here

IP30 Industrial 16* 10/100/100 0TP + 4* 100/1000F SFP Full Ma

Item#:
PN-IGS-20040MT
You must be logged in to order this item. Log in here

1U Network Video Encoder Rack Solution for ZS1A-4DB1, up to

Item#:
ZA1A-NVE12K
You must be logged in to order this item. Log in here

Ethernet - 2 LX Fiber Port + 2 RJ45 Ports 10/100/1000 SM 1 F

Item#:
MX-49-LX-SL-1FSTPOE+
You must be logged in to order this item. Log in here

Web/SNMP 10/100/1000Base-T to WDM Bi-directional Fiber Conve

Item#:
PN-GT-906B15
You must be logged in to order this item. Log in here

24-Port Gigabit (12-Port TP + 12-Port SFP) Plus 1-Port 10G S

Item#:
PN-XGS3-M24GX
You must be logged in to order this item. Log in here

Hardened Industrial 100/1000 Base-T to SFP Media Converter

TRENDnet's TI-F11SFP is a reliable IP30 rated 100/1000 Base-T to SFP media converter with hardened components rated for extreme industrial environments. Set 100 or 1000 Mbps throughput speeds, Auto Negotiation, and Link Fault Pass Through (LFP) using the front panel dip switches. Dual redundant power inputs (power supply sold separately: TI-M6024) with overload current protection support zero downtime applications.
  • Hardened IP30 rated 100/1000 Base-T Ethernet to SFP converter
  • SFP port accommodates Multi or Single Mode fiber
  • Up to 80 km fiber networking distances with the TEG-MGBS80 SFP module
  • Includes DIN-rail and wall mounts
  • Extreme -40 to 75 ºC (-40 to 167 ºF) operating temperature range
  • Dual redundant power inputs with overload current protection
  • Powers supply sold separately (model TI-M6024)
Item#:
TI-F11SFP
You must be logged in to order this item. Log in here
|◀ ◀ 1405 - 1416 of 1873 ▶ ▶|
View:
(Denotes required field.)