|◀ 517 - 528 of 2291 ▶|
View:
You must be logged in to order this item. Log in here
The AY-B85x0 fingerprint and MIFARE (13.56 MHz) or EM (125 kHz) card reader, features a 500-DPI optical sensor, with built-in memory for 7000 FP templates. With TCP/IP, RS-485, and Wiegand 26-Bit connectivity, the AY-B85x0 can be used with any Wiegand supported access control system. This indoor reader features a scratch-resistant FP surface capable of reading both wet and dry fingers, while the high-speed CPU can scan a 1:7000 list in less than 1 second. Each template is assigned a biometric User ID by the controller. When a fingerprint is read and the biometric features are verified as valid, the ID is sent in Wiegand 26-Bit format. The reader does not process the access rights, as this is done on the host controller. Templates and reader settings are managed by TCP/IP connection to the AY-B85x0 using the AxTraxNG™ integrated biometrics features. Alternatively, the RosslareBio 8000 standalone management software for Windows OS interfaces with third-party systems.
  • Small compact design, for indoor use
  • Capacity for 7000 templates 1:7000 with high speed CPU (search time is less than 1 s)
  • Combined RFID card and fingerprint for higher security with dual factor applications
  • Built-in TCP/IP, RS-485, and Wiegand connectivity
  • 50,000 non-volatile event log
  • Wide thermal operating range (-20°C to 60°C)
  • Built-in buzzer and LED indication
  • Modern design that blends into almost any architectural challenge.
Item#:
AY-B8550
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

  • Accepts 5- to 16-volts, meeting most voltage requirements.
  • Available with Wiegand or Clock-and-data interface.
  • Allows easy upgrade from magstripe to a proximity reader; no rewiring or pulling of new cable required.
  • Offers high reliability, consistent read-range and low power consumption in an easy-to-install package.
  • Mounts directly onto metal with no change in read range performance.
  • Provides multicolor LED, compatibility with all standard access control systems and internal or host control of LED and beeper.

Item#:
HID-5365
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
FLR-UHF-60 is an outdoor IP65-rated 433MHz long range receiver designed specifically for ZKAccess long-range transmitters.
With its 200 feet (60M) read-range, FLR-UHF-60 provides users convenient long range authentication for many applications including door access, vehicular gate access and any application in which the user no longer needs to have their credential held in close range to the reader.
FLR-UHF-60 has a built-in Wiegand-Out port which can be connected to most any access control panel (including ZKAccess C3 and InBio door controllers).
  • Technology: Long Range
  • Supported media: ZKAccess 2 and 4-Button Long-Range Transmitters (sold separately)
  • Frequency: 433MHz
  • Read Range: Up to 200 feet (60M)
  • Material: Die-casting aluminum shell, Antenna panel with engineering plastics
  • Color: Off-white plastic enclosure with black label
  • Indoor & Outdoor Installation: Electronics sealed in weather resistant epoxy potting
  • Keypad: N/A
  • Communication Interface: Wiegand (26 bit industry standard and custom Wiegand formats)
  • Power Supply: 12V DC nominal
  • Current: 120 mA typical @ 12V DC
  • IP-rating: 65
  • Operating Temperature: –40° F to 149° F (–40° C to +65° C)
  • Dimensions (H×W×D): 3.4″ W × 6.3″ H × 2.3″ D (86.4 mm × 160 mm × 58.4 mm)
  • Certifications: FCC, CE, ICC, UL Standard 294
Item#:
FLR-UHF-60
You must be logged in to order this item. Log in here
|◀ 517 - 528 of 2291 ▶|
View:
(Denotes required field.)