S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
The PD300EMZ5-1 Plug-in Lamp Module is designed to provide Z-Wave control to a connected dimmable lamp. The PD300EMZ5-1 module is plugged into any standard grounded AC wall outlet, and the lamp is then plugged into the module. Once connected, the lamp can be dimmed or turned on or off remotely via the Z-Wave controller. The module contains two power receptacles – one controlled, and one pass-through (powered at all times).
- Signal (Frequency): 908.42 MHz
- Maximum Load:
- Incandescent: 300W maximum, 120 VAC
- Range: Up to 100 feet line of sight between the wireless controller and/or the closest Z-Wave device
- Network wide inclusion
- One controlled and one pass-through outlet
- Security beaming
Item#:
PD300EMZ5-1
You must be logged in to order this item.
Log in here
This item has been discontinued and replaced by item
P-900 SOURCERFID
Item#:
P-900
You must be logged in to order this item.
Log in here
Surface mount reader. Includes reader and combined BLE module and rear mounting plate. Reads the physical dormakaba lodging and multihousing 17 byte credential format and BLE App. Wiegand standard output. Terminal strip connection on back of reader. Requires CF10004 or CF10010 ACU reader firmware. Works with CA150, CA250, CA4500 & CA8500 ACU’s. Does not work with elevator ECU’s. Powered by 12 Vdc @ 200 mA. Standard 500’ maximum distance with 6-Conductor reader cable.
- For Surface mount applications
- Reads dormakaba lodging and multihousing 17 byte physical credential format and BLE App.
- Wiegand reader that reads the dormakaba lodging and multihousing credential format
- Requires CF10004 or CF10010 ACU firmware
Item#:
SRK-RNSC2
You must be logged in to order this item.
Log in here
S2K Administration - Form Template Display
Actions
(Denotes required field.)