S2K Commerce - Products Dropdown
S2K Commerce - Shopping Cart
S2K Commerce - Order Entry
High output, very low current draw, dual channel siren drivers. They are designed to work with alarm panels with limited current capability.
Features:
Includes:
- 30 Watt Horn Siren
- Attached Mounting Bracket
- Pre-Wired for Easy Installation
- Easy To Mount
- Interior or Exterior use
- UL Listed
- Lifetime Limited Warranty
- Operating Voltage: 12 Volts DC
- Sound Level: 122 db @ 1 meter, 13.8vdc
- Current Draw: 1A @ 13.8vdc
- Size: 8 x 4.7 x 9.6 inches deep (200mm x 120mm x 245mm)
- Color: White
Includes:
- 15 Watt Horn Siren
- Attached Mounting Bracket
- Pre-Wired For Easy Installation
- Interior or Exterior use
- UL Listed
- Lifetime Limited Warranty
- Operating Voltage: 12 Volts DC
- Sound Level: 115 db @ 1 meter, 13.8vdc
- Current Draw: 550mA @ 13.8vdc
- Size: 5.25in. dia x 6in. (135mm dia x 150mm)
- Color: White
The ELK-1RT is a rugged 30 Watt, 8 Ohm speaker mounted in a tamper resistant, "No Rust" enclosure. It features two sealed reed tamper switches, one on the Back plate and one on the Front Cover. The stainless steel naturally reflects the mounting surface and blends easily with any residential or commercial building.
Features:
- Installer Friendly - Easy to Mount - Exterior / Interior use
- Sealed Reed Tamper Switches at single bolt closure and at rear of cabinet
- No Rust - No Mess
- Compact - Less Noticeable
- Loud - Rivals Sound of Larger Speakers
- Heavy Duty 1.8 lb Magnet
- High Fidelity Voice Coil
- Lifetime Limited Warranty
- Impedance: 8 Ohms
- Rating: 30 Watts Nominal / 50 Watts Peak
- Frequency Response: 500 to 7000 Hz
- Enclosure: #304 Stainless Steel with Stainless Hardware Included
- Size: 5 H x 5 W x 4 Inch D
- Tamper: Sealed Reed Switches
The ELK-SL1 is a weather resistant strobe light designed for easy attachment to ELK's stainless steel speaker and siren units. An optional wall kit (ELK-WK1) allows the strobe to be mounted to a wall or to single or double gang electrical boxes.
The attractive SL1 features simple 12 Volts DC two-wire hookup, low current draw, and compatibility with virtually all 12 volt control panels (including pulsing alarm outputs). The ELK-SL1 is molded from virtually indestructible polycarbonate, such as Lexan, and is available in clear, amber, blue, and red.
Includes:
- Strobe
- FiberWasher
- Hex Socket Cap Type 3 Screw
- 3/16 inch Short Arm Hex Key
- Blanking Plug
- 2 Gel Filled B-Connectors
- Instructions
- Indoor / Outdoor
- Durable Polycarbonate
- Easy to Install: Simple 2 Wire Hookup
- Works with pulsing alarm outputs
- Operating Voltage: 12 Volts DC
- Current Draw: 210mA
- Flash Rate: Approx. 1 Flash per second
- Size: 4.875 x 3.875 x 1.125 Inches
- Color: Clear, Red, Blue, or Amber
- Lifetime Limited Warranty
The ELK-SP30 is an interior multi-purposesurface mount speaker great for voice and sounds.
Features:
- Pre-Wired For Quick And Easy Installation
- Compact, Easy To Mount, Hardware Included
- Heavy duty magnet, Mylar cone
- Lifetime Limited Warranty
- Impedance: 8 Ohms
- Rating: 20 Watts Nominal
- Frequency Response: 250 to 8000 Hz
- Size: 4.25 in. x 4.25 in. x 2.13 in.(108mm x 108mm x 54mm)
- Color: White
Features: