Maximal77 distributes and switches power to access control systems and accessories. It converts a 115VAC 60Hz input into sixteen (16) independently controlled 24VDC fuse protected outputs. These Fail-Safe/Fail-Secure power outputs may be converted to dry form "C" contacts. The outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Keypad, Push Button, REX PIR, etc. Units will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the sixteen (16) outputs.

Features

• Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the sixteen (16) outputs.
  Fire Alarm disconnect input options:
  • a) Normally open (NO) or normally closed (NC) dry contact input.
  • b) Polarity reversal input from FACP signaling circuit.
• Alarm output relay indicates that FACP input is triggered (form "C" contact rated @ 1A 28VDC).

• For outdoor gates, garage doors, etc.
• Up to 50ft (15m) sensing range
• Large sensor with patented design and large reflector for a large sensing area and easier alignment
• Reflective beam provides reliable perimeter security, minimizing false alarms from falling leaves, birds, etc.
• Lensed optics reinforces beam strength and provides excellent immunity to false alarms due to rain, snow, mist, etc.
• Response time adjustable from 50~700 ms for nearly all situations
• NO/NC Alarm output
• 12~250 VAC/VDC operation
• Weatherproof, sunlight-filtering case for indoor and outdoor use
• Includes large reflector, hoods for sensor and reflector, and mounting hardware

The Model ANT-1A 7-inch Mid-range Antenna works with Linear’s line of 27 MHz mid-range transmitters and receivers. The Model ANT-1A is a 7-inch rubber duck antenna for short range applications (less than 1 mile). The ANT-1A is supplied with a CON-180A (straight) connector to mate the antenna to a transmitter or receiver. For a right angle antenna mounting, add a CON-90A right angle connector between the ANT-1A antenna and the CON-180A connector.

• Antenna for Linear’s mid-range transmitters and receivers
• Seven-inch ”rubber duck” style
• Supplied with CON-180A straight antenna connector
• Order CON-90A connector for right angle antenna mounting
• Dimensions .65” W x 7” H x .65” D
• Order number: SNE00031