|◀ 433 - 444 of 22437 ▶|
View:

  • Single gang stainless steel wall plate
  • 2 inch green, square push button
  • Labeled "PUSH TO EXIT"
  • Momentary action switch
  • Contacts rated 10A @ 35VDC or 120VAC
  • Switch terminated with colored leads
  • 2-1/2 in. switch depth behind plate
  • Illuminated with hi-brightness LED
  • Other finishes available
  • Custom legends can be provided
  • UL 294 listed

Item#:
TS-2-2
You must be logged in to order this item. Log in here

Features

  • 10 in. color coded wire leads in plastic jacket
  • Non-aluminum parts are plated to resist corrosion
  • Completely sealed in stainless steel case
  • Use 23/64" diameter drill for blind nuts provided with lock
  • Self drilling TEC screws
  • Limited lifetime warranty

Item#:
1200WP
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
  • Where higher security is required for communication, use the NETCOM6P with AES Rijndael (NIST approved) encryption algorithm 
  • A user-defined encryption key, which can be can be 128 bits, 192 bits, or 256 bits, minimizes the possibility of communication breach 
  • Includes a Keyscan NETCOM Program Tool utility for custom installation programming  
  • Also available as an off-board module, NETCOM2 for legacy panels and select integrations 
  • Fast and easy installation for each ACU 
  • Requires Static IP addresses for proper operation 
  • Simplies both installation and maintenance procedures 
  • Easy to program with included utility 
Item#:
NETCOM2P
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

Features

  • Zone of detection easily adjustable with pinpoint accuracy
  • X-Y Targeting targets a specific area of detection
  • Unlocks or shunts door automatically
  • Hands-free, no buttons to push
  • Integrated 90 dB local door alarm sounder independently controlled by access panel
  • Infrared detection coupled with DSP prevents false Door Forced Open alarms
  • 4 models available

Item#:
T.REX-XL
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
The REX sensor is specifically designed for indoor Request-To-Exit applications and features a passive infrared sensor with qualified motion analysis. The sensitivity of the REX sensor can be easily adjusted for long or short range applications and features an adjustable time delay. Because of its sleek design, the REX sensor is easily mounted to any frame, header wall, or ceiling.
Item#:
REXM
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

  • Narrow 1-3/4 in. stainless steel wall plate
  • 5/8 in. x 7/8 in. green rectangular push button
  • Labeled "PUSH TO EXIT"
  • Switch illuminated with hi-brightness LED, operates on 12 or 24 volts AC/DC
  • Momentary action switch
  • D.P.D.T. contacts rated 3A @ 35VDC or 120VAC
  • Temperature range -25C to 70C
  • 1-1/4 in. switch depth behind plate
  • Other switch cap colors available
  • Custom legends can be provided
  • UL 294 listed

Item#:
TS-9
You must be logged in to order this item. Log in here

1200 lbs Single Door Magnetic Lock, 12 or 24 VDC, UL 10C and Canadian UL Listed

Features

  • Instant release, no hysteresis
  • Can be used with any access control system
  • Self drilling TEC screws
  • Built-in arc suppression
  • E-Z mount system, no special tools required
  • Non-aluminum parts are plated to resist corrosion
  • Limited lifetime warranty

Item#:
1200S
You must be logged in to order this item. Log in here
|◀ 433 - 444 of 22437 ▶|
View:
(Denotes required field.)