• 2000 Users
• Network up to 64 doors
• 1500 Transaction storage per door
• First-In Auto Unlock
• Eight Timezones per door
• 16 Holidays per door
• Programmable with Hub Manager® Professional Software
• LAN/WAN Connectivity (requires SEG-1)
• Modem compatible (requires SS-Modem)
• Order number: 0-295137

• Indoor or outdoor flush applications
• Accepts standard mortise cylinders (1" - 1 1/4")
• Mullion style - only 1 3/4" wide
• Heavy duty 1/4" thick aluminum plate
• 1 piece die cast construction
• Locators prevent cylinder from spinning
• Cylinder sits flush to faceplate
• Tamper proof screws and driver provided
• No set screw required
• 1 or 2 switches may be installed
• Heat shrink protective sleeve over contacts

Altronix AL1024ULACM converts a 115VAC 60Hz input into eight (8) independently controlled 24VDC Fail-Safe and/or Fail-Secure outputs with a total of 10A continuous supply current. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. This unit will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. The outputs will operate in both Fail-Safe and/or Fail-Secure modes. This unit is designed to be powered by one common power source (factory installed) which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock / accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs.

Features

• Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the eight (8) outputs.
  Fire Alarm disconnect input options:
  • a) Normally open (NO) or normally closed (NC) dry contact input.
  • b) Polarity reversal input from FACP signaling circuit.
• Alarm output relay indicates that FACP input is triggered (form "C" contact rated @ 1A 28VDC not evaluated by UL).
• Short circuit and thermal overload protection.