|◀ 17557 - 17568 of 23692 ▶|
View:
Item#:
26-1090
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
Item#:
1500C-605-LMS
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
Altronix T1MK1F4SD Trove Mercury kit is pre-assembled and consists of Trove1M1 enclosure/ backplane with factory installed Altronix power supply/charger and sub-assemblies. This kit also accommodates various combinations of Mercury boards for up to four (4) doors in a single enclosure. Trove simplifies board layout and wire management, reduces installation time and labor costs.
Power Supply (eFlow4NB):
Input
  • Voltage: 120VAC, 60Hz.
  • Fusing: 5A / 250V.
Output
  • Voltage: 24VDC.
  • Current: 4A continuous.
  • Other: Overvoltage protection. Filtered and regulated.
Battery Backup
  • Capacity: 7AH / 12VDC (Up to 2 within enclosure). 40 AH / 65 AH (requires separate enclosure).
  • Type: Sealed lead acid or gel type.
  • Fuse: Rating 10A/32V.
  • Failover: Upon AC loss, instantaneous.
Supervision
  • AC Failure: Form “C” contacts.
  • Battery: Form “C” contacts.
  • Low DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge.
Indicators LED
  • Input: 120VAC is present.
  • DC Output: Powered.
  • Battery: Discharged or not connected.
Voltage Regulator (VR6):
Input
  • Voltage: 24VDC from eFlow4NB.
Output
  • Voltage: 12VDC.
  • Current: 6A continuous.
  • Other: Surge suppression.
Indicators (LED)
  • Input: 24VDC is present.
  • Output: Powered.
Access Power Controller (ACM4CB):
Input
  • Voltage: 24VDC from eFlow4NB.
  • Fusing: 10A / 250V.
Output
  • Voltage: 24VDC.
  • Four (4) independently controlled 2.5A outputs:
  • a) Four (4) Fail-Safe and/or Fail-Secure power outputs.
  • b) Any combination of the above.
  • Four (4) auxiliary power outputs (unswitched).
Outputs Ratings
  • PTCs: 2.5A.
Indicators (LED)
  • Red LEDs: Outputs are triggered (relays energized).
  • Green LED: FACP disconnect is triggered.
Dual Input Power Distribution Module (PDS8CB):
Input
  • Voltage: 12VDC from VR6 and 24VDC from eFlow4NB.
  • Main Fuse Rating: 10A.
Output
  • Voltage: 12VDC and/or 24VDC.
  • Any of the eight (8) power outputs are selectable to follow power Input 1 or Input 2.
  • Individual outputs may be set to OFF position for servicing.
Outputs Ratings
  • PTCs: 2A.
Indicators (LED)
  • DC Output: Eight (8) individual output LEDs.
Item#:
T1MK1F4SD
You must be logged in to order this item. Log in here
Item#:
1DB-2-606
You must be logged in to order this item. Log in here

  • Designed to release or secure and monitor one electric lock
  • 1/2" red LED operates on 12 or 24VAC or VDC
  • D.P.D.T. illuminated latching push button with hi-brightness built-in LED
  • Switch LED operates on 12 or 24VAC or VDC
  • Switch contacts rated 3 Amps @35VDC or 120VAC
  • Components mounted on standard single - four gang electrical wall plate
  • Depth behind plate is 1-1/2"
  • Switch and LED terminated with colored leads
  • Green and yellow LEDs available
  • Custom switch legends available

Item#:
SLP-4L
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
Item#:
24-0017-0220-313
You must be logged in to order this item. Log in here
|◀ 17557 - 17568 of 23692 ▶|
View:
(Denotes required field.)