|◀ 913 - 924 of 934 ▶|
View:
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
  • Programmable surface mount contact
  • Compatible with control panels with serial number device capabilities for multiplex polling loop
  • Standard gap: 1-1/4" (32mm)
  • 5' (1.5m) CLII jacketed cable
  • Epoxy sealed for protection from moisture and impact
  • Programmed from VISTA keypad or learn mode
  • Switch Type: Form A (SPST) Reed
  • Contact Rating: 100ma @ 28VDC
  • Honeywell Exclusive: Patent polling loop technology
Item#:
4939SN-WH
You must be logged in to order this item. Log in here
Item#:
4130005
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
The 4208SN Remote Point Module (RPM) is an eight-zone expander that allows the use of available expansion zones on Honeywell VISTA controls that support V-Plex® polling loop devices.
  • Can be used on controls that support up to 250 zones
  • Can be optionally powered from an external DC power supply to reduce the amount of current draw from the polling loop
  • Uniquely identified eight EOLR supervised zones (all zones use 10K resistors, supplied)
  • Each zone is identified by a unique serial number, which is assigned via on-board DIP switches
  • Detects faults on all zones within 400ms of occurence
  • Loops A & B can be programmed for fast (10ms) response
  • Provides cover tamper protection, which may be enabled or disabled via on board DIP switches
Item#:
4208SN
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
The ELK-930 performs three functions. It can detect ring activation from one or two doorbell buttons and a single telephone line. It conveniently isolates the voltage and current and produces an open collector (pull to ground) output which can be used to trigger an automation controller, relay, timer, etc. The circuit is pre-scored so that the individual detectors may be snapped off (separated) from each other.
  • Doorbell
    • Detects Doorbell Activation Current.
    • Inputs for Two Separate Pushbutton Locations.
    • No Interference With Lighted Pushbuttons.
    • Produces an Open Collector Output.
    • Powered by the Doorbell Transformer.
  • Telephone
    • Detects Telephone Ringing Voltage.
    • Provides an Open Collector Output that follows the ringing pattern.
  • Small, Compact Size.
  • Double Sided Foam Tape Provided For Mounting.
  • Packaged in Reusable Poly Storage Box.
  • Max Input on Doorbell Boards: 24 Volts AC Nominal
  • Max Output: 40mA @ 12 Volts D.C.
  • Doorbell Detection Current: 900mA min.
  • Size: 3.4" x 2.75" x .625"
Item#:
930
You must be logged in to order this item. Log in here
Item#:
5510137
You must be logged in to order this item. Log in here
|◀ 913 - 924 of 934 ▶|
View:
(Denotes required field.)