|◀ 49 - 60 of 912 ▶|
View:
The IQ Dimmer is a plug-in lamp module that allows you to control a lamp on, off or any degree in between. It plugs into any standard outlet and acts as a repeater to strengthen the performance of your Z-Wave network.
  • Plugs into any standard outlet
  • Allows any lamp to become dimmable
  • Remotely offers control to turn lamps On or Off
  • Acts as Z-Wave repeater
  • Sleek, discreet look
  • Set automation rules such as "Turn on at sunset" or "When someone walks into room, turn on light"
  • Light allows a clear indicator if outlet is On or Off
  • Input Power: 120 VAC, 60 Hz
  • Max Output Loading: 2.5A, 300W incandescent, 65W dimmable CFL/LED
  • Radio Frequency: 908.4/916 MHz
  • Wireless Range: Up to 130 ft line of sight
  • Normal Operating Temperature: 77°F
*for indoor use only
Item#:
QZ2140-840
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
The ELK-RJSET is for use with Alarm System Communicators, Line Fault devices, or other equipment as a means of connecting to the incoming telephone line. Includes USOC RJ31X 8 pin modular surface mount jack and 2 ft. 8 wire modular cord with plug on one end and spade terminals on the other.
  • USOC RJ31X 8 pin modular surface mount jack.
  • Built-in pass through shorting bars when plug is removed.
  • Connector pins are plated with 50 microns of gold.
  • Includes self adhesive foam mounting pad.
  • Packaged in a clear poly bag.
  • 24 inch, 8 wire modular cord with plug on one end and spade terminals on the other.
  • FCC approved - UL listed as a Communication Circuit Accessory
Item#:
RJSET-ELK
You must be logged in to order this item. Log in here

Features:

  • Guard helps protect against vandalism and damage
  • Helps reduce malfunctions and high maintenance costs
  • 9-gauge coated steel wire
  • Does not interfere with the effective range of any protected motion detector
  • Fast and easy installation
  • 6.25 in H x 4 in W x 2.25 in D

Item#:
STI-9620
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

Features:

  • Quickly and easily update the GC2 or TS1 without incurring the OTA update charges from a remote services provider
  • Connect a PC directly to a GC2 or TS1 using the Firmware Update Cable to update them to the latest firmware
  • 4-pin TS1 adapter included

Item#:
2GIG-UPCBL2
You must be logged in to order this item. Log in here

Features:

  • Guard helps protect against vandalism and damage
  • Helps reduce malfunctions and high maintenance costs
  • 9-gauge coated steel wire
  • Does not interfere with the effective range of any protected motion detector
  • Fast and easy installation
  • 7 in H x 5.75 in W x 4.5 in D

Item#:
STI-9621
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
|◀ 49 - 60 of 912 ▶|
View:
(Denotes required field.)