|◀ 73 - 84 of 289 ▶|
View:
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

The HX-80N is a high mount, outdoor passive infrared detector that provides the stability and reliability necessary for an outdoor PIR sensor. The most important element in reliable outdoor detector is accuracy to distinguish a human from a small animal. The exclusive pyro element on board enables the HX to project an ideal detection pattern, thus allowing for more accurate detection of humans and less false alarms. In addition, the HX-80N's dual PIR's and 20 detection zones utilize the 'AND' detection pattern technology - upper and lower detection areas have to be activated in order to generate an alarm condition. This technology helps to prevent false alarms caused by a pet or small animal. The HX Series' detection length can be limited to avoid unwanted detection, and it's short range zones can be masked if needed. By limiting the detection range, false alarms due to unwanted movement (cars, persons or animals outside the protected area) can be eliminated.

Features:

  • Mounting height 8ft. - 10ft.
  • Intelligent and detectionlogic
  • Double conductive shielding
  • Advanced temperature compensation logic
  • Summer night compensation logic
  • Vegetation sway analysis logic

Optex Wireless Intruder Warning Solutions from John Marco on Vimeo.

Item#:
HX-80N
You must be logged in to order this item. Log in here
Item#:
CH12005001
You must be logged in to order this item. Log in here

Wireless 80ft. Long & Narrow High Mount Outdoor PIR w/Anti-Masking complete with Inovonics transmitter and batteries

Item#:
HX-80NRAMI
You must be logged in to order this item. Log in here

Complete with Inovonics transmitter and batteries

Item#:
AX-200TFRI
You must be logged in to order this item. Log in here
Item#:
CH10023001
You must be logged in to order this item. Log in here

  • Add up to 32 high performance EchoStream wireless transmitters to any installation
  • Includes support for both single and multiple condition transmitters
  • Two line text display shows condition of each transmitter, provides log of past events, and displays signal strength
  • Outputs can be configured in follower, latching, momentary, or toggle modes independently
  • Case tamper protection, jam detection, and internal antennas for a secure wireless implementation
  • Wireless programming routine built into the receiver
  • Includes support for both single and multiple condition transmitters
Item#:
EN4232MR-OPT
You must be logged in to order this item. Log in here
  • Includes backup battery
  • No wires or programming needed
  • Self configuring
  • Case tamper protection
Item#:
EN5040-OPT
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
|◀ 73 - 84 of 289 ▶|
View:
(Denotes required field.)