S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
The ELK-6040 Wireless Glass Break Sensor is designed for use with Elk's two-way wireless product line consisting of the ELK-M1XRFTW Transceiver and the ELK-M1 Control.
The 6040 listens for actual patterns of breaking glass across the full audio band using Pattern Recognition Technology. The factory set recognition patterns make it possible to detect the difference between breaking glass of framed perimeter windows in a building vs. a drinking glass breaking within a room.
Includes:
- Wireless Glass Break Sensor
- Replaceable 3V Lithium battery
- 2 Plastic Anchors
- 2 #6 Pan Head Sheet Metal Screws
- Instructions
- Pattern Recognition Technology
- Wireless two-way communication
- Operation Alarm LED - RED (viewable from front)
- RF Acknowledge LED - Bi-Color (viewable with cover off)
- Long life Lithium battery {supplied}
- Low battery trouble signal
- Dimensions: 4.25in. W x 3.13in. H x 1.70in. D
- Sensor: Omni-directional Microphone, 360° Detection Range
- Detection Range: 20 ft. (6m) x 360°
- Min. Distance from Glass: 4 ft. (1.2m)
- Glass Thickness:
- Plate 3/32 to 1/4 in. (2.4 to 6.4mm)
- Tempered 1/8 to 1/4 in. (3.2 to 6.4mm)
- Wired 1/4 in. (6.4mm)
- Laminated 1/8 to 1/4 in. (3.2 to 6.4mm)
- Power: One CR123 3.0 VDC Lithium Bttery
- Typical Battery Life: 5 years
The ELK-965 is a Low Battery Cutoff Module combined with a Master Power Switch. It is designed to work with virtually any 12 Volt control panel or power supply.
In the event of an extended power outage, the ELK-965 sensing circuit automatically disconnects the battery when the voltage falls below 10 Volts DC. This helps to prevent "deep discharging" of the battery. The convenient power switch permits the installer or user to easily disconnect both the Battery and the AC power from the control or power supply.
Includes:
- 20 Low Battery Cutoff & Master Power Switches
- 40 pieces of Double Sided Tape
- Instructions
- Works With Any 12 Volt Control Panel
- Automatic Low Battery Cutoff Protects Battery From Deep Discharge
- AC and Battery On / Off Power Switch
- Visual LED Power Indicator
- Installer Friendly - Small Compact Size
- Includes AC Wires & Battery Leads
- Fits Standard Snap Track
- Includes Double Sided Mounting Tape
- Lifetime Limited Warranty
- Relay Contacts: Form "C", 7 Amp @ 28 VDC
- On / Off Power Switch: DPDT Slide Type
- AC Power Leads: 18 AWG, 18" Length
- Maximum Transformer Size: 18 VAC
- Battery Leads: 18 AWG, 18" Length
- Low Battery Cutoff Voltage: ~ 10 VDC
- Size: 1.75 in. X 2.185 in.(44.5mm X 55.5mm)
This wireless keychain remote (FOB) provides 4 push buttons, LED feedback indicator and features Elk's industry leading two-way technology. From the remote it is possible to arm, disarm, check status, and trigger a panic alarm.
Includes:
- ELK-6010 Keyfob
- Replaceable 3V Lithium Coin Cell Battery (CR2032)
- Instructions
- Compatible with ELK-M1XRFTW(M) two-way wireless transceivers
- Status inquiry button & LED indicator provide arm, disarm, and alarm memory status
- 902 Mhz - 928 Mhz frequency hopping
- Dimensions: 1.50 in. W x 2.32 in. L x .50 in. D
- Battery: CR2032 Lithium Coin Cell
S2K Administration - Form Template Display
Actions