S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
The ELK-9200 is a Heavy Duty Relay/Contactor inside a lockable metal enclosure. It is designed for remotely controlling high current devices such as electric water heaters, pumps, motors, gates, etc. The energizing coil of the 9200 is 110 VAC, however its relay contacts are capable of switching 220 VAC at up to 30 Amps of current.
- Pre-Wired Terminal Lugs for easy Installation.
- 110 VAC Plug Cord for Energizing the Relay Coil
- Heavy Duty "Lockable" Metal Enclosure
- 30 Amp Long Life Double Pole Relay Contacts.
- Relay Suitable for a 110 VAC or 220 VAC Load
- Ideal for Water Heaters, Motors, Pumps, etc.
- Operating Coil Voltage: 110 VAC
- Coil Current Draw: less than 35 mA
- Contacts Rated for: 30 Amps AC maximum
- Metal Enclosure Size: 12" x 12" x 3.375" * Not suitable for wet locations.
- Color: White
Item#:
9200
You must be logged in to order this item.
Log in here
Works with the M1 control along with the ELK-M1XRFTW Two-Way Wireless Transceiver. Intended to be used in residential and light commercial installations, the PIR incorporates advanced features designed to ensure reliability, ease of installation, and provide innovative security enhancements.
To simplify installation, ELK's Wireless PIR Motion Sensor allows the installer to remotely enable/disable Walk Test Mode from a keypad. Until now, the industry has accepted the process of manually tripping a switch on a one-way wireless PIR to enter walk test mode. The bright high-intensity white LED convenience/security light clearly identifies when the sensor is detecting motion.
Includes:
- Wireless PIR Sensor
- 2 Replaceable 3V Lithium battery
- Standard Swivel Bracket and Locking Disc
- Blanking Plug
- 2 Plastic Anchors
- 2 #6 Pan Head Sheet Metal Screws
- Plastite #3 x ¼ in. screw
- #4 x 3/8 in. Pan Head Sheet Metal screw
- Instructions
- Ease of installation with keypad initiated walk test
- Industry First Security/Convenience Bright White LED with:
- Momentary motion activation during walk test mode
- Flashing during audible alarm activation
- Programmable "on" activation through M1 Rules
- Illuminate an area for camera assistance during event
- Temporary night path lighting
- Long battery life and 2 selectable sleep mode durations
Item#:
6030-ELK
You must be logged in to order this item.
Log in here
The ELK-6040 Wireless Glass Break Sensor is designed for use with Elk's two-way wireless product line consisting of the ELK-M1XRFTW Transceiver and the ELK-M1 Control.
The 6040 listens for actual patterns of breaking glass across the full audio band using Pattern Recognition Technology. The factory set recognition patterns make it possible to detect the difference between breaking glass of framed perimeter windows in a building vs. a drinking glass breaking within a room.
Includes:
- Wireless Glass Break Sensor
- Replaceable 3V Lithium battery
- 2 Plastic Anchors
- 2 #6 Pan Head Sheet Metal Screws
- Instructions
- Pattern Recognition Technology
- Wireless two-way communication
- Operation Alarm LED - RED (viewable from front)
- RF Acknowledge LED - Bi-Color (viewable with cover off)
- Long life Lithium battery {supplied}
- Low battery trouble signal
- Dimensions: 4.25in. W x 3.13in. H x 1.70in. D
- Sensor: Omni-directional Microphone, 360° Detection Range
- Detection Range: 20 ft. (6m) x 360°
- Min. Distance from Glass: 4 ft. (1.2m)
- Glass Thickness:
- Plate 3/32 to 1/4 in. (2.4 to 6.4mm)
- Tempered 1/8 to 1/4 in. (3.2 to 6.4mm)
- Wired 1/4 in. (6.4mm)
- Laminated 1/8 to 1/4 in. (3.2 to 6.4mm)
- Power: One CR123 3.0 VDC Lithium Bttery
- Typical Battery Life: 5 years
Item#:
6040
You must be logged in to order this item.
Log in here
Honeywell's 5808W3 is a 3V lithium powered, photoelectronic smoke/heat detector with a built-in wireless transmitter. It is intended for use with any 5800 Series Wireless Receiver/Transceiver for residential installations (for commercial installations, the 5881ENHC or the 5883H receiver is required).
The transmitter can send alarm, tamper, maintenance (when control panels are equipped to process maintenance signals), and battery condition messages to the system’s receiver. Smoothing algorithms minimize nuisance alarms by smoothing out short term spikes from dust and smoke – virtually eliminating nuisance alarms.
Since there are no holes to drill or wires to run, you can preserve the beauty of the building while protecting it. The 5808W3 is an ideal smoke detector for those difficult to wire locations, applications where room aesthetics are critical, or where hazardous materials exist.
All models also feature a restorable, built-in, fixed temperature (135°F) thermal detector that is also capable of sensing a pre-freeze condition if the temperature is below 41°F.
- Improved Robust RF Field Strength: The distance between the detector and receiver has been significantly increased without the need for a repeater
- Smoothing Algorithms: Mathematical calculations in the detector’s software that minimize nuisance alarms by smoothing out short term spikes from dust and smoke
- Smart Check: A signal is sent to the control panel when the detector requires cleaning. This allows a regular, non-emergency service call to clean the detector before it goes into alarm.
- Drift Compensation: Virtually eliminates nuisance alarms from long-term dust build-up by automatically adjusting the detector’s sensitivity
- Removable Detector Cover and Chamber Top: The technician is able to quickly and easily clean the detector chamber without disassembling the detector head
- Approved UL Listings for Residential and Commercial Applications: Both residential and commercial installation requirements are met
- Additional LED Status Indicators: Identifying between alarm or trouble conditions is a snap with green and red LED status indicators. A green LED denotes a normal condition while the red LED indicates abnormal conditions.
- Easy-to-install Mounting Base: The sturdy mounting base allows the detector to be more easily installed on uneven surfaces (i.e. stucco). The mounting base has larger mounting ports, which accommodate drywall anchors for easy surface mounting.
- Utilizes one long-life 3V lithium battery
- Microcontroller runs on a 4.0 MHz clock
- Horn operates at 3.3 KHz with sound pressure level of 85 dBA at 10 feet
- Built-in wireless transmitter, temporal code 3 sounder
- Maintenance signal fully complies with the sensitivity test requirement specified in NFPA 72, 7-2.2 and is approved by UL
Item#:
5808W3
You must be logged in to order this item.
Log in here
The 6160CR-2 is an addressable remote keypad intended for use in commercial fire applications with Honeywell’s commercial fire control panels. The keys are continuously backlit for convenience and easy visibility. The LCD display is backlit only when a key is depressed*, or when the system is in alarm or trouble condition.
- Four programmable function keys
- Built-in sounder
- Seven Status LEDs
- Armed (Red)
- Ready (Green)
- Power (Green)
- Fire Alarm (Red)
- Silenced (Yellow)
- Supervisory (Yellow)
- Trouble (Yellow)
- Large easy-to-read display
- Red removable door
- Physical 5.250" W x 7.437" H x 1.312" D
Item#:
6160CR-2
You must be logged in to order this item.
Log in here
S2K Administration - Form Template Display
Actions
(Denotes required field.)