Home  >  INTRUSION  > (x)
|◀ 6769 - 6780 of 8445 ▶|
View:
You must be logged in to order this item. Log in here
Item#:
WD-101
You must be logged in to order this item. Log in here
The M1XSLZW is a specialized Elk-M1 serial expander for connecting an M1 Control to Z-Wave enabled devices through a Leviton VRC0P+3 Z-Wave Serial Interface. Z-Wave is a wireless, low power, "mesh" network technology widely used for automating devices such as: Lights, Thermostats, Electronic Locks, etc. Z-Wave empowers devices to be remotely controlled from across the room or across the world with benefits such as energy savings, convenience, and comfort.
The VRC0P+3 is known as a Z-Wave Secondary Controller. It must be included as a permanent member of the Z-Wave network as its job is to maintain contact with all Z-Wave devices. It communicates via RS232 to the M1XSLZW which translates the protocol into the M1 control. This allows commands to be sent and received on the Z-Wave network.
  • Activity/Status LED (Orange)
  • Auto-Reset Hardware Watchdog Circuit
  • Addressable (1-7) TYPE 5 Databus ID
  • Connection to VRC0P+3: DB9M 9 Pin Port
  • Connection to M1: Elevator Screw Terminals (4)
  • Operating Voltage: 12 Volts D.C.
  • Current Draw: 31mA
  • Housing: 4.25" x 6.375" x 2.125"
  • Circuit Board: 2.25" x 3.95"
Item#:
M1XSLZW
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
Item#:
T2HW7CK1D
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

The XT-IP630 control panel is a wireless, battery operated, hybrid alarm system. It is designed for residential, small business security applications, as well as both indoor and outdoor commercial applications (construction sites, cell towers, remote sites, substations...) where the location of the panel has Ethernet (IP) or Cellular (3G) connection.

Features:
The panel includes the choice of many different configuration options including the following:

  • Arming by Videofied Peripherals, Schedule, Virtual Keypad, or exisiting alarm system
  • Power the system by Power Supply + Battery Backup or standalone battery (up to 4 years)
  • Communicate over Ethernet + Cellular Backup (3G), Ethernet Only, or Cellular Only (3G)
  • 25 wireless zones for Videofied Peripherals plus 3 Programmable input zones for hardwired devices
  • Choose between the Internal RF antenna or switch to an External RF antenna option
  • 2 Hardwired outputs
  • Virtual Keypad arming and disarming from Smartphone

Item#:
XT-IP630
You must be logged in to order this item. Log in here
Item#:
T1MKT4SADQ
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
|◀ 6769 - 6780 of 8445 ▶|
View:
(Denotes required field.)