S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
This thin wireless window sensor, 6021, is perfect for double hung and casement style wood/vinyl windows and features Elk's industry leading two-way technology.
Includes:
- Mini Wireless Window Sensor
- Magnet
- Replaceable 3V Lithium Coin Cell battery
- Double Sided Tape for both transmitter and magnet
- Instructions
- Compatible with ELK-M1XRFTW(M) two-way wireless transceivers
- One built-in reed switch
- 902 Mhz - 928 Mhz frequency hopping
- Maximum operating gap of reed: 3/8in.
- Max. recommended mounting distance from receiver: 100 ft.
- 3V CR2032 lithium battery
- Battery Life: 3 years typical
- Size: 1.1in. W x 2.3in. L x .25in. D, Magnet: .37in. W x 2.3in. L x .25in. D
- Mini Wireless Window Sensor
- Magnet
- Replaceable 3V Lithium Coin Cell battery
- Double Sided Tape for both transmitter and magnet
- Instructions
- Compatible with ELK-M1XRFTW(M) two-way wireless transceivers
- One built-in reed switch
- 902 Mhz - 928 Mhz frequency hopping
- Maximum operating gap of reed: 3/8in.
- Max. recommended mounting distance from receiver: 100 ft.
- 3V CR2032 lithium battery
- Battery Life: 3 years typical
- Size: 1.1in. W x 2.3in. L x .25in. D, Magnet: .37in. W x 2.3in. L x .25in. D
The ELK-74 is a Two-Tone (Yelp & Steady) Siren mounted in an attractive surface mount plastic enclosure. This versatile Echo Series siren is designed to be heard but not seen! Sound "echoes" off mounting surface from back plate edge.
This unique contemporary siren has a smooth, paintable, "no grill" surface that easily blends with any decor. This siren mounts to any flat surface or single gang electrical "J" box. Also available is the ELK-71.
Includes:
- Compact Echo Siren
- (4) Plastic Anchors
- (4) #6 pan head sheet metal screws
- Instructions
- Pre-Wired for easy Installation
- May be Painted or Wallpapered
- Mounting Hardware Included
- Lifetime Limited Warranty
- Operating Voltage: 6 - 14 Volts DC
- Sound Level: 100 db @ 1 meter, 13.8vdc
- Current Draw: 480mA @ 13.8vdc
- Size: 4.56 H x 4.3 W x 1.875 inch D
- Color: White
- Low Current Draw
- Positive Or Negative Activation
- Form "C" Dry Contacts
- Elevator Style Screw Terminals
- Great For General Purpose Switching
- Small, Compact Size
- Double Sided Foam Tape Provided For Mounting
- Packaged in Reusable Poly Storage Box
- Operating Voltage: 12 Volts DC
- Current Draw: 30mA (relay on)
- Relay Contacts: Form "C" , 7A @ 30VDC, 10 A @ 125VAC
- Min. Pull-in Voltage: 9 VDC
- Size: 1.1" X 1.55" (28mm X 39mm) Ea.
The ELK-6023 Wireless Recessed Door Sensor is the ultimate wireless security device for discriminating customers. It mounts into a 3/4in. drilled hole in a wooden door jamb and becomes nearly invisible once the door is closed. It features Elk's Industry Leading Two-Way Technology with positive signal acknowledgment, extended range, and long battery life.
Includes:
- Wireless Recessed Door Sensor
- Magnet
- Replaceable 3.6V Lithium battery
- 2 #4 x .5 in. Flat Head Sheet Metal Screws
- Instructions
- Compatible with ELK-M1XRFTW(M) two-way wireless transceiver
- Designed for wood and vinyl doors only
- Built-in tamper switch
- Frequency: 902 Mhz - 928 Mhz frequency hopping
- Dimensions: .75in. D x 2.5in. L Mag: .75in. D x .625in. L
- Maximum Operating Gap: 3/4 in.
- Battery: 3.6V Lithium 1/2 AA size
- Tamper Switch: Circuit Board Cover
6062 programmable timer is suitable for many functions that require a timed operation e.g. Access Control Applications, Siren/Bell Cut Off Module, Dialer Delay, Guard Tour Supervisory Timer, etc. Some optional functions include: One Shot, Delayed Release, Delayed Operate, Delayed Pulse and Pulser/Flasher.
Features:
Input
Current Draw
Relay
Visual Indicators
Electrical
- 12 to 24 Volt DC Operation
- Adjustable Time Delay
- SPDT (Form "C") Relay
- Low Current Input Trigger (<1ma)
- Selectable Positive or Negative trigger
- Selectable Initial Relay State: ON / OFF
- Operating Modes: One-Shot or Repeat
- LED Indication of Relay State
- Operating Voltage: 12 to 24 Volts DC.
- Current Draw: 40 mA DC with relay on.
- Time Settings: 1 to 60 Seconds or 1 to 60 Minutes.
- Relay Contacts: Form "C", 7A @ 30VDC, 10 A @ 125VAC.
- Size: 3" x 2.2" x 1" (Fits Standard. Snap Track).
- Trigger Voltage: 4.5 - 24VDC.
- Works With Any 12 Volt Control Panel
- AC and Battery On / Off Power Switch
- Visual LED Power Indicator
- Installer Friendly - Small Compact Size
- Includes AC Wires & Battery Leads
- Fits Standard Snap Track
- Includes Double Sided Mounting Tape
- Relay Contacts: Form "C", 7 Amp @ 28 VDC
- On / Off Power Switch: DPDT Slide Type
- AC Power Leads: 18 AWG, 18" Length
- Maximum Transformer Size: 18 VAC
- Battery Leads: 18 AWG, 18" Length
- Low Battery Cutoff Voltage: ~ 10 VDC
- Size: 1.75" X 2.185"(44.5mm X 55.5mm)
The ELK-965 is a Low Battery Cutoff Module combined with a Master Power Switch. It is designed to work with virtually any 12 Volt control panel or power supply. In the event of an extended power outage, the ELK-965 sensing circuit automatically disconnects the battery when the voltage falls below 10 Volts DC. This helps to prevent "deep discharging" of the battery. The convenient power switch permits the installer or user to easily disconnect both the Battery and the AC power from the control or power supply.
Includes:
- 1 Low Battery Cutoff & Master Power Switch
- 2 pieces of Double Sided Tape
- Instructions
- Works With Any 12 Volt Control Panel
- Automatic Low Battery Cutoff Protects Battery From Deep Discharge
- AC and Battery On / Off Power Switch
- Visual LED Power Indicator
- Installer Friendly - Small Compact Size
- Includes AC Wires & Battery Leads
- Fits Standard Snap Track
- Includes Double Sided Mounting Tape
- Lifetime Limited Warranty
- Relay Contacts: Form "C", 7 Amp @ 28 VDC
- On / Off Power Switch: DPDT Slide Type
- AC Power Leads: 18 AWG, 18" Length
- Maximum Transformer Size: 18 VAC
- Battery Leads: 18 AWG, 18" Length
- Low Battery Cutoff Voltage: ~ 10 VDC
- Size: 1.75 in. X 2.185 in.(44.5mm X 55.5mm)
The ELK-924 Sensitive Relay module features DPDT (Form "C") dry contacts for general purpose switching of devices or high current loads. It operates on 12 or 24 volts DC and can be triggered with a negative or positive input at an incredible low current of only 1 milliamp.
Also available in a 4 pack (ELK-9244) which is packaged as 4 relay modules grouped on a pre-scored break-off circuit board.
Includes:
- (1) ELK-924 Relay
- 6 pieces of Double Sided Mounting Tape
- Instructions
- Super Low 1.2 mA Trigger Current
- Positive (+) Or Negative (-) Trigger Input
- Double Form C Contacts DPDT
- Heavy Duty Contact Rating
- On Board LED Status Indicator
- Includes Double Sided Mounting Tape
- Mounts in Standard 2.75 in. Snap Track
- Packaged in Reusable Poly Storage Box
- Lifetime Limited Warranty
- Operating Voltage: 12 or 24 Volts DC, jumper selectable
- Current Draw: 60mA (both relays on)
- Relay Contacts: Form C , 7A @ 30VDC, 10 A @ 125VAC
- Size: 1.5 in. X 2.75 in.
- Trigger Voltage: 5 - 24VDC
- Trigger Current: 1.2mA @12 VDC
- Provides exceptional outdoor protection of windows, gates, and doors
- Ensures reliable performance using built-in PowerG leading-edge wireless intrusion technology, with two-way communication
- Extra-long transmission range makes it suited for very large properties
- Operates dependably in extreme weather and harsh environmental conditions (IP66 certified)
- Wide gap tolerance reduces false alarms, and makes installation easier
- Delivers long-lasting security with a battery life of up to 5 years (with typical use)
- Fast and convenient auto-enrollment, with a pull tab
- Battery can be replaced without removing the device
- Easily concealed, with a paintable exterior casing that can be matched to different surfaces
- Complies with the strict security standard EN Grade 2
S2K Administration - Form Template Display
Actions