S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
The HUSK-20 is a mechanical hold-up switch designed for silent operation. It is activated by using one finger to press down on the switch.
When activated, the switch mechanism locks, insuring an immediate alarm signal. A status window designed on top of the hold-up switch indicates its condition: RED (alarmed) and BLUE (armed). To reset the HUSK-20, use the key provided. The housing is made of metal and is painted gray.
The hold-up switch sends a signal to a dedicated 24 hour hold-up circuit of a burglar control panel. That signal in turn will send the immediate signal to police or central station.
Features:
The ELK-965 is a Low Battery Cutoff Module combined with a Master Power Switch. It is designed to work with virtually any 12 Volt control panel or power supply. In the event of an extended power outage, the ELK-965 sensing circuit automatically disconnects the battery when the voltage falls below 10 Volts DC. This helps to prevent "deep discharging" of the battery. The convenient power switch permits the installer or user to easily disconnect both the Battery and the AC power from the control or power supply.
Includes:
- 1 Low Battery Cutoff & Master Power Switch
- 2 pieces of Double Sided Tape
- Instructions
- Works With Any 12 Volt Control Panel
- Automatic Low Battery Cutoff Protects Battery From Deep Discharge
- AC and Battery On / Off Power Switch
- Visual LED Power Indicator
- Installer Friendly - Small Compact Size
- Includes AC Wires & Battery Leads
- Fits Standard Snap Track
- Includes Double Sided Mounting Tape
- Lifetime Limited Warranty
- Relay Contacts: Form "C", 7 Amp @ 28 VDC
- On / Off Power Switch: DPDT Slide Type
- AC Power Leads: 18 AWG, 18" Length
- Maximum Transformer Size: 18 VAC
- Battery Leads: 18 AWG, 18" Length
- Low Battery Cutoff Voltage: ~ 10 VDC
- Size: 1.75 in. X 2.185 in.(44.5mm X 55.5mm)
The ELK-6040 Wireless Glass Break Sensor is designed for use with Elk's two-way wireless product line consisting of the ELK-M1XRFTW Transceiver and the ELK-M1 Control.
The 6040 listens for actual patterns of breaking glass across the full audio band using Pattern Recognition Technology. The factory set recognition patterns make it possible to detect the difference between breaking glass of framed perimeter windows in a building vs. a drinking glass breaking within a room.
Includes:
- Wireless Glass Break Sensor
- Replaceable 3V Lithium battery
- 2 Plastic Anchors
- 2 #6 Pan Head Sheet Metal Screws
- Instructions
- Pattern Recognition Technology
- Wireless two-way communication
- Operation Alarm LED - RED (viewable from front)
- RF Acknowledge LED - Bi-Color (viewable with cover off)
- Long life Lithium battery {supplied}
- Low battery trouble signal
- Dimensions: 4.25in. W x 3.13in. H x 1.70in. D
- Sensor: Omni-directional Microphone, 360° Detection Range
- Detection Range: 20 ft. (6m) x 360°
- Min. Distance from Glass: 4 ft. (1.2m)
- Glass Thickness:
- Plate 3/32 to 1/4 in. (2.4 to 6.4mm)
- Tempered 1/8 to 1/4 in. (3.2 to 6.4mm)
- Wired 1/4 in. (6.4mm)
- Laminated 1/8 to 1/4 in. (3.2 to 6.4mm)
- Power: One CR123 3.0 VDC Lithium Bttery
- Typical Battery Life: 5 years
The ELK-924 Sensitive Relay module features DPDT (Form "C") dry contacts for general purpose switching of devices or high current loads. It operates on 12 or 24 volts DC and can be triggered with a negative or positive input at an incredible low current of only 1 milliamp.
Also available in a 4 pack (ELK-9244) which is packaged as 4 relay modules grouped on a pre-scored break-off circuit board.
Includes:
- (1) ELK-924 Relay
- 6 pieces of Double Sided Mounting Tape
- Instructions
- Super Low 1.2 mA Trigger Current
- Positive (+) Or Negative (-) Trigger Input
- Double Form C Contacts DPDT
- Heavy Duty Contact Rating
- On Board LED Status Indicator
- Includes Double Sided Mounting Tape
- Mounts in Standard 2.75 in. Snap Track
- Packaged in Reusable Poly Storage Box
- Lifetime Limited Warranty
- Operating Voltage: 12 or 24 Volts DC, jumper selectable
- Current Draw: 60mA (both relays on)
- Relay Contacts: Form C , 7A @ 30VDC, 10 A @ 125VAC
- Size: 1.5 in. X 2.75 in.
- Trigger Voltage: 5 - 24VDC
- Trigger Current: 1.2mA @12 VDC
The IQ Mini-S is an ultra compact encrypted sensor that securely connects to the IQ Panel 2. Using our proprietary S-Line encryption technology, encrypts signals sent to the IQ Panel while still providing backwards compatibility for legacy 319.5 systems. Easy to install on anything that opens or closes, the IQ Mini-S can provide intelligent notifications like "door left open" can be custom named, and can even support Smart home rules like "when door opens, turn on light" or "when door left open adjust thermostat to save energy." Boasting up to eight years of battery life, the IQ Mini-S uses an innovative board and antenna design to extend range and allow mounting on a variety of surfaces. The IQ Mini-S also includes a rare earth magnet for flexible mounting options in a variety of situations.
- Encrypted S-Line sensor technology protects signals sent to the IQ Panel while still providing support for legacy 319.5 systems
- Can be easily mounted on doors or windows with included adhesive
- Alerts IQ Panel if moved more than 1 inch
- Can be programmed as Safety Sensor for medicine cabinets, chemical storage, safes or storage closets
- Using Alarm.com you can get a text if your door or window is left open
- Create automation rules like turn on light when door is opened or adjust thermostat if window left open
- Requires two (2) 3V CR2032 Batteries
- The built-in tamper switch triggers an alert if the cover is removed
- Create custom names for each sensor, determine unique chime type, choose voice prompts on or off
- Encrypted S-Line sensor technology protects signals sent to the IQ Panel while still providing support for legacy 319.5 systems
- Provides security coverage up to 30' in a large open area
- Use to create rules such as "When someone enters the room, turn on light" or "Trigger alarm when intruder detected"
- Pet immune up to 40 lbs
- Code outputs: paring, tamper, tamper restore, alarm detect motion, alarm restore, supervisory, low battery
- Transmitter frequency: 319.5MHZ +-15KHz
- Transmitter bandwidth: 24KHZ
- Modulation type: ASK-OOK
- RF output power 91.1dBuV +/- 5% at 3m
- Sensor Range 30 ft (9.1 m) x 40 ft (12.2 m)
- Maximum Horizontal Sensing Angle 80°
- Operating Temperature: -10C~50C
- Relative Humidity: 5-95%
- Non-Condensing Storage Temperature: -40C to 80C
- Affordable All-in-One
- 8 Core Processor, LTE & Wi-Fi Dual Path, 7" Touchscreen
- Choose Your Version
- PowerG or S-Line or Interlogix or 2Gig or DSC or Honeywell
- Automation
- Z-Wave 800, lights, locks, thermostats, garage doors
- Video
- Live View, Live Answer doorbell & cameras on screen
- Bluetooth
- Touchless disarming music streaming
- Easy Installation
- SmartMount, Install Wizard, on-screen diagnotics & more
S2K Administration - Form Template Display
Actions