S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
The sensor (Model
2GIG-TILT1e-345) is designed for applications where the tilt status of an
asset, such as a garage door, needs to be monitored. Other uses might include:
mailbox doors, large pet doors, or hinged storm cellar doors. The tilt sensor
communicates with the control panel using the 345 MHz frequency. Once the
sensor is tilted to 45 degrees, the sensor will transmit to the panel. The
sensor will also send a restore signal when the sensor it returned to less than
45 degrees.
Features
- Encrypted Protocol for Enhanced Security
- Encrypted Wireless Tilt Sensor
- Sensor transmits alert when tipped 45° off vertical
- Restore signal sent when sensor returned to less than 45°
- Requires GC2e panel firmware revision 1.14 or higher
- Long life lithium battery included
- Screw, adhesive mount hw. included
- Aesthetically pleasing slim and compact design
- Ideal for commercial applications and large residences
- Market-leading perimeter detection using Active Infrared Technology (Photoelectric beams) and PowerG range
- Transmitter is designed to send an infrared beam over long distances
- Coverage area of 200 ft. with short range model PG9200AXÂ
- Easy to install with view finder, alignment dials and LED indicators
- Reliable performance with twin (PG9200AX)Â beams
- Cover and wall tamper protection
- Extended battery life with PowerG
- Polycarbonate cover protects the cover of the beams from UV rays and other harsh environmental conditions
- IP55/IP65 dust-tight and waterproof rating ensures dependable operation even in extreme conditions
- Compatible with PowerSeries Neo, PowerSeries Pro and Qolsys IQ panels
The RE114 Smoke Detector is a highly reliable smoke detector with a photoelectric detection element and built-in temporal 3 sounder. Long range transmitter and a detection element that is UL217 certified.
- UL217 and ULC531 listings
- Smoke and heat detection
- 5 year warranty
Features:
- Remote Keypad for Edge Panel
- Display of camera feeds, slide show of photos and videos
- Photo snapshot at arm/disarm
- Alerts, chimes and annunciations
- Auto discovery protocol
- Wi-Fi Dual Band (2.GHz and 5 GHz)
Specifications
- Dimensions - 10.87" x 6.66" x 2.36"
- Weight - 1.68 lbs
- UL/ETL Listing - UL 985, UL 1023, UL 2017, ULC-S545, ULC S304 (for Canada)
- Package Contents - Power Supply, Mounting Kit, Quick Install Guide & Regulatory Documentation
- Warranty - 3 year limited warranty
The way that the Qolsys IQ Hardwire 16-F works is very simple. It has 16 on-board zone terminal pairs for connecting hardwired sensors. Each zone features its own LED light to assist with enrollment and troubleshooting. A resistor must be used at each zone. In Legacy Mode, the QS7134-840 can be calibrated to use 1k to 10k resistors that are wired in parallel (NO) or series (NC). This differs from the older-style QS7133-840 that was restricted to only supporting 4.7k resistors (Yellow-Violet-Black-Brown-Brown). However, all versions of the Qolsys IQ Hardwire 16-F come with the same 4.7k resistors that must be used to meet UL Standards for fire protection. These resistors work great, so it is advised that you just use the included ones to avoid any possible confusion.
For primary power, the Qolsys IQ Hardwire 16-F uses its included 16VDC transformer. This transformer features an attached power cable for connecting with the module. On the cable, the wire with the grey dashes is the positive (+) connector. The unmarked wire represents the negative (-) connector. If you damage the transformer or the attached cable, then you will need to get a replacement 16VDC transformer.
The IQ Glass is specially designed to protect you if an intruder tries to break-in through a window. Using our proprietary S-Line encryption technology, encrypts signals sent to the IQ Panel while still providing backwards compatibility for legacy 319.5 systems. Triggered by the pitch and frequency of breaking glass, the IQ Glass is effective within 25 ft. and is activated automatically when you arm your IQ Panel in either "Stay" or "Away" mode. Typically installed on the opposite wall or on the ceiling to allow for better "listening" ability in large living areas.
- Encrypted S-Line sensor technology protects signals sent to the IQ Panel while still providing support for legacy 319.5 systems
- Actively listening for breaking glass frequencies when you are in "stay" or "away" modes
- Typically installed on the wall opposite the windows needing protection, or on the ceiling in a room with windows on multiple sides
- Protects widows within line of sight within 25 ft.
NanoMax is the smallest full-featured security transmitter in the industry. It is typically used to sense opening and closings of doors and windows, but can secure just about anything using its Strip & Stick external contact holes. It will alarm when the magnet is pulled away from the NanoMax or when the external contact is opened.
- Low-profile and discreet
- Amazing RF range
- Up to 1-inch magnet gap
- Support for an external contact
- Peel and stick installation
- 6+ year battery life
- 5-year warranty
The 2GIG CO8/CO8e is a wireless carbon monoxide detector. Consisting of an electrochemical carbon monoxide sensor assembly coupled to a wireless transmitter, the detector communicates with the security panel and can send alarm, tamper and battery condition messages.
Features
- 10 year sensor life
- 10 year battery life
- Built-in 85 decibel sounder
- 3v battery powered
- Tamper protected case
- Full monitoring of alarm, low battery, and tamper conditions
- End-of-life detector
- Lithium battery
- ETL listed
Model Number: 2GIGCO8e345 (eSeries with encrypted signal)
Model Number: 2GIGCO8345 (non-encrypted signal)
S2K Administration - Form Template Display
Actions