GEM-RECV96 will accommodate up to 96 wireless zones. The receiver is connected to the control panel's 4-wire bus. The receiver monitors each transmitter, updating transmitter status as reports are received, and conveys this information to the control panel. Also monitored is the elapsed time since the last report from each transmitter. If no report is received within a programmed time, a Supervisory Failure will result.

Features:

• New super compact design, 2.5 x 1 x 0.4 (HxWxD inches)
• Tamper supervised
• Replaceable lithium PL2032 coin cell battery (supplied)
• 5-year battery life, typical
• Magnet and Internal reed switch
• External lead (24" mini connector pigtail) for wiring external devices (jumper-selectable)
• Magnet mounts with either supplied double-face tape or screws (screwtabs snap off mounting plate)

The Blue Line Gen2 TriTech Motion Detectors use a combination of passive infrared (PIR) andmicrowave detection technologies with advanced signal processing. The petfriendly (WP) models generate alarms for human intruders without generating false alarms for pets. These small unobtrusive detectors are simple to install and do not need field adjustments.

Features:

• Petfriendly Selectable model available  optimize installation for pet (45 kg [100 lb]) and nonpet applications
• Dynamic Temperature Compensation  superior catch performance in any environment
• Microwave Noise Adaptive processing  reduce false alarms from repetitive sources
• Wall to Wall Coverage  superior catch performance
• Flexible Mounting Height, No Adjustments  reduce installation time and false alarms, improve catch performance
• Self-locking Enclosure with Integrated Bubble Level  reduce installation time

The Inovonics four zone add-on receiver with relay outputs programs and supervises up to four Inovonics transmitters. This receiver includes Form C relays for each output, allowing connection to any hardwire panel, or stand-alone wireless application.

Features:

• Add up to four high performance EchoStream wireless transmitters to any installation
• LED allows the user to view the current status of all four transmitters
• Five form C relays for connecting to any panel: four alarm, one fault
• Outputs can be configured in follower, latching, momentary, or toggle modes independently
• Case tamper protection, jam detection, and internal antennas for a secure wireless implementation
• Wireless programming routine built into the receiver

NEO Control Panel Kit. Contains one HS2032NK control panel with CP01 software in a PC5003C cabinet, one HS2LCDRF9ENG Full Message LCD Hardwired Keypad with Built-in PowerG Transceiver, a BD4-12 12V, 4Ah battery, a PTD1640U standard efficiency transformer, and a SD15WULF indoor siren.

Features:

• Waterproof personal panic button.
• Worry-free peace of mind.
• 1-button operation with tactile feedback click.
• Extra-large, soft touch button for trouble-free use even by dexterity-impaired or arthritic hands.

Features

• 8 to 32 hardwire or wireless zones/points; up to 48 RF wireless points Including 2 2-wire fire zones
• Up to 48 user codes
• Up to 2 areas
• Fuseless, maintenance-free operation
• 3 on-board relay outputs; expandable to 24
• 1 on-board programmable lug
• Up to 2 RF receivers
• Up to 7 keypads
• Interior bypass groups
• Up to 24 X-10 devices supported
• 800 vent log
• Auto arm/disarm

The Inovonics billtrap transmitter features the same profile and ruggedness of a hardwire billtrap, providing the flexibility necessary in any financial or retail environment.

Features:

• Two alarm transmission modes, two and ten-second delay, to reduce false alarms
• Wireless design provides ease of installation and drawer removal
• Case and back tamper
• Smart baiting - LED indication confirms when bill has been inserted into the billtrap