Home  >  INTRUSION  > (x)
|◀ 133 - 144 of 8454 ▶|
View:
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

SMP5 power supply/charger converts a low voltage AC input into a 6VDC, 12VDC or 24VDC output. This unit has a wide range of applications for access control, security and CCTV system accessories that require additional power.

Features:

  • Extremely compact design.
  • Includes battery leads.
  • Snap Trac compatible (order Altronix model number ST3).

Specifications:
Input:
  • 6VDC applications use TP1640.
  • 12VDC applications use T2428100.
  • 24VDC applications use T2428175.
Output:
  • 6VDC, 12VDC or 24VDC selectable output.
  • 4A supply current.
  • Filtered and electronically regulated outputs.
  • Short circuit and thermal overload protection.
Battery Backup:
  • Built-in charger for sealed lead acid or gel type batteries.
  • Zero voltage drop when switching over to battery backup.
Visual Indicators:
  • AC input and DC output LED indicators.
Electrical:
  • Temperature:
    • Operating: 0° C to 49° C (32° F to 120° F).
    • Storage: - 20° C to 70° C ( - 4° F to 158° F).
  • Relative Humidity 85% +/- 5%.
  • BTU/Hr (approx.):
    • 6VDC: 13 BTU/Hr.
    • 12VDC: 25 BTU/Hr.
    • 24VDC: 49 BTU/Hr.
  • System AC input VA requirement:
    • 6VDC: 55.2VA.
    • 12VDC/24VDC: 115VA.

Item#:
SMP5
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
Item#:
SLMULTDP2S
You must be logged in to order this item. Log in here
The ELK-P624 is a general-purpose regulated power supply and battery charger. It is ideal for alarm, access control, and CCTV applications requiring up to 1 Amp continuous current. Automatic resetting "fuseless" overload protection means never having to return to a job site to replace a blown fuse. 
On-board diagnostic LEDs indicate the presence of the AC charging and DC output voltages. The output voltage can be set with a mini-jumper.
  • Selectable 6, 12, or 24 Volts DC Operation
  • Automatic Resetting "fuseless" Overload Protection (PTC)
  • Visual AC and DC Power Indicators
  • Built-In Battery Charge Circuit
  • Small, Compact Size
  • Includes Double Sided Mounting Tape
  • AC and DC Surge Suppression
  • 6VDC Setting:
    • Current Rating: 1.2A
    • with 12V, 40VA Transformer
  • 12VDC Setting:
    • Current Rating: 1.0A
    • with 16.5V, 45VA Transformer
  • 24VDC Setting:
    • Current Rating: 800mA
    • with 24V, 40VA Transformer
  • Standby Battery Capacity: 1.2 to 10 AH
  • Size: 3" X 3" (76.2mm X 76.2mm)
Item#:
P624
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
Extended Remote Antenna Kit for use with cellular fire communicators, suitable for outdoor or indoor applications. Includes SLE-ANT Antenna, stainless steel coated cable clamps, stainless steel #10 screws and washers, 30' LMR 300 Coax Type N male to SMA male terminated cable, one (1) SMA female to TNC male adapter for use with competitive communicators. Also includes SLE-ANTEXT-ISO Commercial Fire Ground Fault Isolation Plate.
Item#:
SLE-ANTEXT30
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
Item#:
SHARK/MW
You must be logged in to order this item. Log in here
|◀ 133 - 144 of 8454 ▶|
View:
(Denotes required field.)