|◀ ◀ 253 - 264 of 394 ▶ ▶|
View:

DOTTIE #8 WALL DRILLER KIT, 50 SCREWS, 50 ANCHORS

Item#:
POSWDK8N
You must be logged in to order this item. Log in here

Strobe, Ceiling Mount, High Candela, Red

This item has been discontinued and replaced by item 

The SpectrAlert Advance SCRH is a red, ceiling-mount strobe with selectable high-candela strobe settings of 135, 150, 177 and 185 cd.

Item#:
SCRH
You must be logged in to order this item. Log in here

Adjustable Z-Bracket - M32/62, Clear Anodized

  • Used on inswing doors with the "F" type Magnalock 8.5 inch overall length
  • Provides 1.25 inch of lateral movement to accommodate most openings and allows for precision adjustments (2-1/4 to 3-1/2 in. from door/header)
  • Includes an oversized Dress Cover

Item#:
ZA-32/62CL
You must be logged in to order this item. Log in here

GC2 4G LTE (Verizon) Cell Radio with SecureNet

2GIG LTE cell radio module brings longer-life cellular connectivity and simple installation to 2GIG GC2 systems. Dealers can save time and reduce costs with cost efficient and easy-to-install cell radio modules. For the end-users 2GIG LTE radios provide better support for cellular connectivity of smart home devices while improving remote control experiences.
The 2GIG-LTEV1-NET-GC2 is a 4G LTE radio for the Verizon network to work with SecureNet. This new radio transfers both data and two-way voice over Verizon’s 100% LTE network and VoLTE (Voice over LTE) technology. To enable the 2GIG-LTEV1-NET-GC2 radio, the GC2 Panel requires Firmware version 1.19.1 or newer & GC2E Panel requires Firmware version 1.20 or newer.
  • 4G LTE cellular module
  • Works with Verizon Network
  • Compatible with SecureNet
  • US Only
  • GC2 Requires FW v1.19.1 or newer
  • GC2E Requires FW v1.21 or newer
  • Includes 2 (two) LTE Antennas in the box with the radio
Item#:
2GIG-LTEV1-NET-GC2
You must be logged in to order this item. Log in here

REPLACEMENT DOME FOR HANWHA SNF-8010VM

Item#:
Z7204182801A
You must be logged in to order this item. Log in here

LCD Keypad For M1 Controls

The ELK-M1KP is an addressable LCD Keypad for the M1 Cross Platform Controls. It features a 32 character back lighted display with adjustable intensity and extra large character fonts for ease of readability. The M1KP includes a plug-in connector on the back for adding an internal proximity reader (ELK-M1PR) or for interfacing to virtually any external 26 bit Wiegand compatible proximity reader. Proximity cards/fobs can be used for touchless arming, disarming, door strike control, etc.
Includes:

  • LCD Keypad with Green Display
  • 1 each Multicolor & Quick Reference Labels
  • 4 #6 Flat Head Phillips Sheet Metal Screw
  • 1 2200 Ohm Resistor
  • 5 Gel Filled B-Connector
  • 1 Mini Jumper
  • 6-wire Flying Lead Cable Assembly
  • Instructions
Features:
  • Large, Easy to Read Characters
  • Back lighted with Adjustable Intensity
  • Removable Hinged Door
  • Unique Menu Navigation/Direction Keys
  • Operates on 4-Wires (M1 Data Bus)
  • Built-in Speaker with Adjustable Beep Tone and Volume
  • Accepts Plug-in Proximity Card Reader (Optional)
  • Input for 1 Supervised Zone
  • One Programmable Voltage Output
  • Exit, Stay, Chime, and Bypass Keys
Specifications:
  • Input Connection: 6 Pin Plug-in "Flying Lead" Connector Included
  • Proximity Connection: 5 Pin Plug-in "Flying Lead" Connector (optional ELK-WO35A required for external proximity reader)
  • Color: Glacier White
  • Operating Voltage: 13.8 VDC
  • Current Draw: 40 - 50 mA Idle (low back light level, sounder silent)
  • 160 mA Fully Active (max. back light & sounder active)
  • Size: 6.875" W x 5.25" H x 1.375" D
Item#:
M1KP
You must be logged in to order this item. Log in here

Camera Skins (3 pack, Black).

Item#:
VMA1200B-10000S
You must be logged in to order this item. Log in here

Protege DIN Rail 16 Zone Input Expander

Item#:
PRT-ZX16-DIN
You must be logged in to order this item. Log in here

SG SS 1.5 GREEN LATCH ILL MUSH ROOM 1NC 1NO 1/2

Item#:
TS-56G
You must be logged in to order this item. Log in here

USB 2.0 to 10/100 Mbps Ethernet Network Adapter Dongle

The USB2100 USB 2.0 to 10/100 Mbps Network Adapter lets you add a Fast Ethernet port to your laptop or desktop computer through USB.
This compact USB network adapter offers a dongle design with a built-in cable to avoid cramped connections, making it a perfect solution for adding wired Ethernet connectivity to your desktop without opening the case, or to replace a failed onboard network adapter on your laptop system.
Providing half or full-duplex operation, this USB 2.0 Ethernet adapter supports data transfer rates of up to 200 Mbps. The adapter also supports features such as Wake-on-LAN (WoL) and VLAN tagging for added flexibility.
  • 10/100 Mbps Ethernet through USB 2.0
  • IEEE 802.3i and 802.3u (10BASE-T, 100BASE-TX) compatible
  • Supports half / full-duplex operation
  • Crossover Detection & Auto-Correction (Auto MDIX)
  • IEEE 802.1Q VLAN Tagging support
  • Dongle with integrated USB cable
Item#:
USB2100
You must be logged in to order this item. Log in here

SW SET, 100-T-W W/2.2K RES

Item#:
100-T-W W/2.2K
You must be logged in to order this item. Log in here

20 Blank GC2e Faceplates

Item#:
2GIG-GC2E-FP-20PK
You must be logged in to order this item. Log in here
|◀ ◀ 253 - 264 of 394 ▶ ▶|
View:
(Denotes required field.)