The 8000 series is a compact, high-performance electric strike featuring a unique concealed design for use with cylindrical locksets. No cutting on the frame is required. Simply remove the existing strike plate, adjust the vertical alignment feature to the latchbolt centerline, and install. Its strength is derived from a unique keeper pin locking design, enabling the 8000 to exceed the ratings of the frame, door and locking hardware. This field selectable fail secure/fail safe unit is easy to install and accommodates latchbolts up to 5/8 in. throw.

The 5883 relay interface board provides 10 general purpose Form C relays that can be used to control auxiliary devices, interface to building control systems or to remote graphical annunciators. The 5883 is controlled by the 5880 LED/IO module. Each 5880 is capable of driving four 5883 relay interface boards for a total of 40 outputs.

Features:

• 10 general purpose Form C relays
• Relays rated at 5A 30VDC or 250VAC resistive
• Each output can be individually activated by the 5880 LED/IO module
• Housed in protective cabinet
• UL listed

The HUB-T Series Hold-Up Buttons provide two sets of momentary or latching DPDT contacts for actuating surveillance cameras or other security applications, in addition to the hold-up signal. The two sets of contacts may be used independently of each other, or they may be wired in series with a jumper wire for additional protection against false alarms.

Features

Enable bi-directional communication with the IMAGE Sensor 3

Easy to install into any GC2e panel

Replaces existing 345 MHz receiver and provides both a 900 MHz transceiver and 345 MHz receiver

Provides support for:

• Legacy 345 Sensors
• eSeries encrypted 345 Sensors
• 2GIG-IMAGE3

Requires GC2e security panel with firmware 1.23 or later.

Bi-Directional Overhead Door-Track Mount Type For 2 1/2 inch Rails