|◀ ◀ 193 - 204 of 354 ▶ ▶|
View:

RG59 BNC PATCH CABLE 1 FOOT

Item#:
PEAKBNCCBL1
You must be logged in to order this item. Log in here

3/4 x 2 Nipple

Item#:
NPL75200
You must be logged in to order this item. Log in here

Swivel Mount Bracket, 5 Pack

Item#:
SMB10
You must be logged in to order this item. Log in here

SB: 8000-12/24D No Cut Strike Body

The 8000 series is a compact, high-performance electric strike featuring a unique concealed design for use with cylindrical locksets. No cutting on the frame is required. Simply remove the existing strike plate, adjust the vertical alignment feature to the latchbolt centerline, and install. Its strength is derived from a unique keeper pin locking design, enabling the 8000 to exceed the ratings of the frame, door and locking hardware. This field selectable fail secure/fail safe unit is easy to install and accommodates latchbolts up to 5/8 in. throw.

Item#:
10720401
You must be logged in to order this item. Log in here

Relay Driver Board for use with 5880

The 5883 relay interface board provides 10 general purpose Form C relays that can be used to control auxiliary devices, interface to building control systems or to remote graphical annunciators. The 5883 is controlled by the 5880 LED/IO module. Each 5880 is capable of driving four 5883 relay interface boards for a total of 40 outputs.

Features:

  • 10 general purpose Form C relays
  • Relays rated at 5A 30VDC or 250VAC resistive
  • Each output can be individually activated by the 5880 LED/IO module
  • Housed in protective cabinet
  • UL listed

Item#:
005883
You must be logged in to order this item. Log in here

3" Ext Rod, Powder Coated, Chr ome

Item#:
1430234
You must be logged in to order this item. Log in here

Covert PIR Camera, 2MP, 3.7mm Lens, 1080p

  • Image Resolution: 2MP
  • Lens: 3.7mm Taper Pinhole Lens
  • Voltage: 12VDC
  • Image Sensor: 1/2.8” SONY Starvis Back-illuminated CMOS Sensor
  • Power Consumption: 150mA
  • Features: OSD, UTC, Auto White Balance, 3D NR, IR Cut, WDR
  • Operation Temperature: -10°C ~ +50°C RH95% Max
  • Dimensions ( W x L x D): 2.76" x 1.57" x 4.69" (70 x 40 x 119 mm)
  • Weight: 0.77LB (350g)
Item#:
PEAKPIR2MP
You must be logged in to order this item. Log in here

Wall bracket for PEAKIPBTC5MVA

Item#:
PEAKB173-02
You must be logged in to order this item. Log in here

PSC-1-H HID Compatible Standard Light Proximity Card Clamshell, CR-80

Item#:
PSC-1-H
You must be logged in to order this item. Log in here

T.Rex request to exit detector, w/ tamper, piezo, timer and 2 relays, White

Item#:
TREX-XL2
You must be logged in to order this item. Log in here

PDU 2 - Two Outlet Intelligent PDU

The PDU 2 Power Distribution Unit simplifies installations and reduces the cost of service by providing intelligent power optimized for networking systems. The PDU Series extends control from traditional rack enclosures to hard to reach displays - and everything in between.  The PDU 2 offers individual IP control of 2 outlets allowing the PDU to self-heal connected devices if they go down, and gives you the ability to do a hard reboot or power cycle connected devices via remote management platforms such as Domotz, Ihiji or other third-party control systems – all without rolling a truck.
With intuitive setup and operation, pre-emptive problem notification and automatic problem resolution, Luxul PDUs ensure system reliability and uptime. The ability to choose local control or remote control via Domotz, Ihiji or other third-party control systems ensures system uptime and reliability while maximizing your productivity.
  • Individual IP outlet control of 2 outlets
  • Easy setup and control
  • IP “Autoping” and recovery for optimized system reliability
  • MOV surge and spike protection
  • Fast and easy configuration
  • Automatic actions improve system reliability
  • Automatic notification of connection status
  • Control start-up or shut-down with remote sequencing
  • Seamlessly interfaces with third- party control systems and cloud platforms for scheduling, control, reporting and customization
  • 3-year limited warranty
  • Connected equipment warranty 
Item#:
PDU-02
You must be logged in to order this item. Log in here

Single Port Gigabit PoE/PoE+ Injector (up to 30W)

The Single Port PoE+ (Power Over Ethernet) Injector delivers both data and electrical power to PoE enabled devices using standard Ethernet cable. This eliminates the need to place devices (i.e. wireless access points) near a power outlet, allowing for greater installation flexibility, while also reducing installation and labor costs. PoE enabled devices may be placed up to 328 feet (100 meters) away from the POE Injector. Power Cord included in this kit. Your Ethernet cable is required.
Specifications
  • 802.3af/at compliant
  • Delivers up to 30 Watts of power
  • Gigabit Speeds (10/100/1000)
  • Built in power supply
Item#:
XPE-2500
You must be logged in to order this item. Log in here
|◀ ◀ 193 - 204 of 354 ▶ ▶|
View:
(Denotes required field.)