Home  >  MARK DOWNS  > (x)
|◀ 361 - 372 of 398 ▶|
View:
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
The PDU 2 Power Distribution Unit simplifies installations and reduces the cost of service by providing intelligent power optimized for networking systems. The PDU Series extends control from traditional rack enclosures to hard to reach displays - and everything in between.  The PDU 2 offers individual IP control of 2 outlets allowing the PDU to self-heal connected devices if they go down, and gives you the ability to do a hard reboot or power cycle connected devices via remote management platforms such as Domotz, Ihiji or other third-party control systems – all without rolling a truck.
With intuitive setup and operation, pre-emptive problem notification and automatic problem resolution, Luxul PDUs ensure system reliability and uptime. The ability to choose local control or remote control via Domotz, Ihiji or other third-party control systems ensures system uptime and reliability while maximizing your productivity.
  • Individual IP outlet control of 2 outlets
  • Easy setup and control
  • IP “Autoping” and recovery for optimized system reliability
  • MOV surge and spike protection
  • Fast and easy configuration
  • Automatic actions improve system reliability
  • Automatic notification of connection status
  • Control start-up or shut-down with remote sequencing
  • Seamlessly interfaces with third- party control systems and cloud platforms for scheduling, control, reporting and customization
  • 3-year limited warranty
  • Connected equipment warranty 
Item#:
PDU-02
You must be logged in to order this item. Log in here
The Single Port PoE+ (Power Over Ethernet) Injector delivers both data and electrical power to PoE enabled devices using standard Ethernet cable. This eliminates the need to place devices (i.e. wireless access points) near a power outlet, allowing for greater installation flexibility, while also reducing installation and labor costs. PoE enabled devices may be placed up to 328 feet (100 meters) away from the POE Injector. Power Cord included in this kit. Your Ethernet cable is required.
Specifications
  • 802.3af/at compliant
  • Delivers up to 30 Watts of power
  • Gigabit Speeds (10/100/1000)
  • Built in power supply
Item#:
XPE-2500
You must be logged in to order this item. Log in here
The ELK-319DR is a Supervised, Wireless Door Sensor uniquely designed for recess mounting on the inside edge of a door and its frame. The sensor is virtually invisible when the door is closed.
This sensor is compatible with Elk's 319MHz Receivers/Panels as well as many other panels that operate on the 319.5MHz Frequency and adhere to the ITI/Interlogix protocol.
  • Long range and battery life
  • Transmits open/close, tamper, low battery, and supervisory signals
  • Uses single easy to find CR2 battery
  • RF frequency: 319.5 MHz
  • Compatibility: ELK-319 Receivers/Panels & other panels that operate on the 319.5MHz Freq. and adhere to the ITI/Interlogix protocol
  • Battery type: 3VDC "CR2" lithium
  • Operating Temp Range: -40 to 140°F (-40 to 60°C)
  • Dimensions 2.25" L x .75" D
Item#:
319DR
You must be logged in to order this item. Log in here
Honeywell’s SC100 Series Seismic Vibration Sensors were designed to protect high-value and high-risk assets in financial, retail and other applications.

The SC100 model detects vibrations arising from attempts to disturb solid structures including fixed ATMs, bank vaults, safes and doors. The SC100 can be installed in new or existing security systems and offer a higher level of protection and false alarm immunity than traditional shock sensors, which often lack the ability to discriminate between ambient vibration and real attacks.

The SC100 Series contain several unique features that reduce installation time and costs—including a Universal setting that lets dealers choose between safes and vaults with the change of a dip switch, integrated end-of-line (EOL) resistors that improve connectivity to the control panel, a built-in diagnostic tool and a compact size that enables placement inside small areas.

  • Detects attacks on Bank vault doors, ATMs, night deposit safes, strong room vaults, modular vaults, vending machines, freestanding safes, hatches, gates, chests and other objects with a solid structure
  • Detects attacks from 
    • Heavy strokes or gross attacks from sledgehammers or explosives 
    • Repeated knocks from hammers and chisels 
    • Drilling, mechanical cutting, acetylene torches, thermal cutting, water-cooled diamond drills, water jet cutting tools, hydraulic jacks (SC100 only)
  • Compact size Smallest available on market so fits easier when space is limited
  • Universal (ATM and vault) The SC100 can also be used for ATMs and night deposit safes by the simple change of a dip switch. No separate sensors are required.
  • Drilling shield (standard) Protects electronics inside against sabotage
  • Extended temperature Allows operation in extreme temperature conditions (-40° F to 158° F)
  • Remote sensitivity reduction input Option to reduce sensor sensitivity remotely during maintenance on ATMs, thereby reducing false alarms
  • Multi-compatible mounting plate fits on pre-fab holes Fits on most pre-drilled mounting holes from other seismic sensors, preventing time consuming drilling/threading. The same mounting plate can be used for mounting on concrete and welding on steel.
  • Integrated End-of-Line (EOL) resistors EOL resistors for alarm as well as tamper loop are already incorporated, saving installation time and reducing service calls
  • Integrated temperature alarm The SC100 and SC105 will alarm if the temperature exceeds 185° F. Additionally the SC100 version alarms when temperature rises faster than 6° F per minute.
  • Diagnostic LED Built-in tool easily selects correct sensitivity; no time consuming external tools required
  • Selectable sensitivity Four different sensitivity settings adapt to required range and environmental conditions
  • Remote testing and test transmitters Input to remotely start functional test with help of SC113 (Internal Test Transmitter) or SC115 (External Test Transmitter). If no test transmitter is available, it is possible to test internal electronics with this test.
  • Available accessories Mounting plate, keyhole protection kit, day/night kit, Internal Test Transmitter, armed cable and External Test Transmitter. This range of accessories allows the SC100 and SC105 Seismic Sensors to be mounted in a wide range of applications.
  • Listed to UL639
  • Listed to ULC-S306
Item#:
SC100
You must be logged in to order this item. Log in here

ENFORCER SD-9163-KSQ "No Touch" Request-To-Exit Plates use IR technology to request egress from a protected area or to activate a device with the simple wave of a hand. Since they require no touch, these plates are ideal for use in hospitals, clinics, labs, cleanrooms (to reduce the risk of contamination), schools, factories, or offices.

  • Weather-resistant (IP65) for outdoor use
  • Clean and simple no-touch operation reduces the risk of cross-contamination
  • Adjustable sensor range up to 7" (18cm)
  • Stainless-steel plate, available in slimline or single-gang
  • 1A relay, adjustable trigger duration 0.5~20 seconds
  • Selectable LED colors (turns from red to green or green to red) to show if the sensor is activated

Item#:
SD-9163-KSQ
You must be logged in to order this item. Log in here
Honeywell's SC100 Series Seismic Vibration Sensors were designed to protect high-value and high-risk assets in financial, retail and other applications.

The SC105 was designed to safeguard freestanding objects like standalone ATMs, gun cases, file cabinets, vending and ticket machines and more. The SC105 can be installed in new or existing security systems and offer a higher level of protection and false alarm immunity than traditional shock sensors, which often lack the ability to discriminate between ambient vibration and real attacks.

The SC100 Series contain several unique features that reduce installation time and costs—including a Universal setting that lets dealers choose between safes and vaults with the change of a dip switch, integrated end-of-line (EOL) resistors that improve connectivity to the control panel, a built-in diagnostic tool and a compact size that enables placement inside small areas.
  • Detects attacks on Bank vault doors, ATMs, night deposit safes, strong room vaults, modular vaults, vending machines, freestanding safes, hatches, gates, chests and other objects with a solid structure
  • Detects attacks from 
    • Heavy strokes or gross attacks from sledgehammers or explosives 
    • Repeated knocks from hammers and chisels 
    • Drilling, mechanical cutting, acetylene torches, thermal cutting, water-cooled diamond drills, water jet cutting tools, hydraulic jacks (SC100 only)
  • Compact size Smallest available on market so fits easier when space is limited
  • Universal (ATM and vault) The SC100 can also be used for ATMs and night deposit safes by the simple change of a dip switch. No separate sensors are required.
  • Drilling shield (standard) Protects electronics inside against sabotage
  • Extended temperature Allows operation in extreme temperature conditions (-40° F to 158° F)
  • Remote sensitivity reduction input Option to reduce sensor sensitivity remotely during maintenance on ATMs, thereby reducing false alarms
  • Multi-compatible mounting plate fits on pre-fab holes Fits on most pre-drilled mounting holes from other seismic sensors, preventing time consuming drilling/threading. The same mounting plate can be used for mounting on concrete and welding on steel.
  • Integrated End-of-Line (EOL) resistors EOL resistors for alarm as well as tamper loop are already incorporated, saving installation time and reducing service calls
  • Integrated temperature alarm The SC100 and SC105 will alarm if the temperature exceeds 185° F. Additionally the SC100 version alarms when temperature rises faster than 6° F per minute.
  • Diagnostic LED Built-in tool easily selects correct sensitivity; no time consuming external tools required
  • Selectable sensitivity Four different sensitivity settings adapt to required range and environmental conditions
  • Remote testing and test transmitters Input to remotely start functional test with help of SC113 (Internal Test Transmitter) or SC115 (External Test Transmitter). If no test transmitter is available, it is possible to test internal electronics with this test.
  • Available accessories Mounting plate, keyhole protection kit, day/night kit, Internal Test Transmitter, armed cable and External Test Transmitter. This range of accessories allows the SC100 and SC105 Seismic Sensors to be mounted in a wide range of applications.
  • Listed to UL639
  • Listed to ULC-S306
Item#:
SC105
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

The 1000Base-SX Industrial SFP Multi-Mode LC Module, model TI-MGBSX, is designed to operate within a wide temperature range and is well suited for industrial environments. This SFP module works with standard SFP slots found on industrial switches and fiber converters. The TI-MGBSX is compatible with Duplex LC fiber connector types and supports gigabit multi-mode fiber connections at distances of up to 550 m (1804 ft.).

  • Compliant with IEEE 802.3z Gigabit Ethernet
  • ANSI Fiber Channel compliant
  • Small Form-Factor Pluggable (SFP) and Multi-Source Agreement (MSA) compliant
  • Wide operating temperature range of -40 85C (-40 185F)
  • Supports data rates of up to 1.25 Gbps
  • Transmission distance of up to 550 m (1804 ft.)
  • Low Electromagnetic Interference (EMI) design
  • Supports 850 nm multi-mode network transmissions
  • Duplex LC optical interface
  • Low power consumption
  • 3-year warranty
Item#:
TI-MGBSX
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
|◀ 361 - 372 of 398 ▶|
View:
(Denotes required field.)