Home  >  MARK DOWNS  > (x)
|◀ ◀ 289 - 300 of 360 ▶ ▶|
View:

3/8'' X 6'' SPADE BIT

Item#:
SPA3/8-6
You must be logged in to order this item. Log in here

PREMADE 50 FOOT CBL RG59 BNC WITH 12V PWR CONNECTORS WHITE

Item#:
PEAKZ2050
You must be logged in to order this item. Log in here

150: Strike Latch Guard

Installed at the edge of the door to cover the lock and electric strike.

  • Stainless steel
  • Available in 626 finish only

Item#:
10270051
You must be logged in to order this item. Log in here

Universal BNC 2 Pc Crimp-On -- Male -- 50 Ohm, RG59 PVC & RG

Item#:
350-00TP
You must be logged in to order this item. Log in here

LCD Keypad For M1 Controls

The ELK-M1KP is an addressable LCD Keypad for the M1 Cross Platform Controls. It features a 32 character back lighted display with adjustable intensity and extra large character fonts for ease of readability. The M1KP includes a plug-in connector on the back for adding an internal proximity reader (ELK-M1PR) or for interfacing to virtually any external 26 bit Wiegand compatible proximity reader. Proximity cards/fobs can be used for touchless arming, disarming, door strike control, etc.
Includes:

  • LCD Keypad with Green Display
  • 1 each Multicolor & Quick Reference Labels
  • 4 #6 Flat Head Phillips Sheet Metal Screw
  • 1 2200 Ohm Resistor
  • 5 Gel Filled B-Connector
  • 1 Mini Jumper
  • 6-wire Flying Lead Cable Assembly
  • Instructions
Features:
  • Large, Easy to Read Characters
  • Back lighted with Adjustable Intensity
  • Removable Hinged Door
  • Unique Menu Navigation/Direction Keys
  • Operates on 4-Wires (M1 Data Bus)
  • Built-in Speaker with Adjustable Beep Tone and Volume
  • Accepts Plug-in Proximity Card Reader (Optional)
  • Input for 1 Supervised Zone
  • One Programmable Voltage Output
  • Exit, Stay, Chime, and Bypass Keys
Specifications:
  • Input Connection: 6 Pin Plug-in "Flying Lead" Connector Included
  • Proximity Connection: 5 Pin Plug-in "Flying Lead" Connector (optional ELK-WO35A required for external proximity reader)
  • Color: Glacier White
  • Operating Voltage: 13.8 VDC
  • Current Draw: 40 - 50 mA Idle (low back light level, sounder silent)
  • 160 mA Fully Active (max. back light & sounder active)
  • Size: 6.875" W x 5.25" H x 1.375" D
Item#:
M1KP
You must be logged in to order this item. Log in here

Camera Skins (3 pack, Black).

Item#:
VMA1200B-10000S
You must be logged in to order this item. Log in here

Protege DIN Rail 16 Zone Input Expander

Item#:
PRT-ZX16-DIN
You must be logged in to order this item. Log in here

SG SS 1.5 GREEN LATCH ILL MUSH ROOM 1NC 1NO 1/2

Item#:
TS-56G
You must be logged in to order this item. Log in here

USB 2.0 to 10/100 Mbps Ethernet Network Adapter Dongle

The USB2100 USB 2.0 to 10/100 Mbps Network Adapter lets you add a Fast Ethernet port to your laptop or desktop computer through USB.
This compact USB network adapter offers a dongle design with a built-in cable to avoid cramped connections, making it a perfect solution for adding wired Ethernet connectivity to your desktop without opening the case, or to replace a failed onboard network adapter on your laptop system.
Providing half or full-duplex operation, this USB 2.0 Ethernet adapter supports data transfer rates of up to 200 Mbps. The adapter also supports features such as Wake-on-LAN (WoL) and VLAN tagging for added flexibility.
  • 10/100 Mbps Ethernet through USB 2.0
  • IEEE 802.3i and 802.3u (10BASE-T, 100BASE-TX) compatible
  • Supports half / full-duplex operation
  • Crossover Detection & Auto-Correction (Auto MDIX)
  • IEEE 802.1Q VLAN Tagging support
  • Dongle with integrated USB cable
Item#:
USB2100
You must be logged in to order this item. Log in here

2-Wire Horn/Strobe, Ceiling Mount, High Candela, Red

The SpectrAlert Advance PC2RH is a red, two-wire, ceiling-mount horn strobe with selectable high-candela strobe settings of 135, 150, 177 and 185 cd.

Item#:
PC2RH
You must be logged in to order this item. Log in here

Keystone Midi Plate 1 Port, Bl ack, UL

Item#:
20-3011-BK
You must be logged in to order this item. Log in here

GC3 Transceiver Image Sensor Adapter

To enable the Image2 on a GC3 panel, the new Image Sensor Adapter ( 2GIG-XCVR3-GC3) is required to be installed, as well as Firmware version 3.0.1 or newer.

Item#:
2GIG-XCVR3-GC3
You must be logged in to order this item. Log in here
|◀ ◀ 289 - 300 of 360 ▶ ▶|
View:
(Denotes required field.)