|◀ 469 - 480 of 712 ▶|
View:
You must be logged in to order this item. Log in here

  • 1/4" button with guard ring
  • One normally-open contact pair and on normally-closed contact pair
  • Contacts rated 10A @ 35VDC
  • Pneumatic time delay range 2 to 60 seconds
  • Switch time is repeatable ±10%
  • Switch mounted on a single gang stainless steel electrical plate
  • Conforms to UL Standard 294 for Access Control, File Number SA32686
  • Temperature range +15F to +12-F
  • Switch depth 2-1/4" behind plate
  • Stainless steel plate

Item#:
TS-15
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

  • Compatible with all ENFORCER 315MHz transmitters
  • Use to control garage door opener, house lights, alarm control panel, or other devices via remote control
  • 10A @ 24VDC or 120VAC per channel, NO/NC/COM
  • Frequency 315MHz
  • This revolutionary receiver incorporates:
    • Hi-Q SELECTIVITY and a CODING IC for rejecting unwanted RF signals.
    • HIGHER SENSITIVITY for greater operating distances.
    • UNSURPASSED ANTENNA MATCHING CAPABILITIES so the receiver is less affected by how and where mounted.
    • GREATER TUNING STABILITY so the receiver's frequency remains unaffected by shock and vibration.
  • LED indicates RF reception, learn mode entered, transmitter learned, memory cleared
  • Mode switch for easy transmitter learning
  • Learns up to 15 transmitters
  • 5 Output modes (programmable):
    • 4-Second momentary,
    • 1-Second momentary,
    • Toggle,
    • Validity: receiver outputs for as long as the transmitter button is pressed,
    • Latch
  • Screw terminals for simple connection

Item#:
SK-910RBQ
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
Honeywell's Request-to-Exit (RTE) sensors offer basic and full-featured models to suit every access control application. The quick-install sensors are extremely flexible, provide a generous amount of wiring room and contain built-in internal "tamper proof" shutters to enable precise target area detection.
  • Adjustable relay time (0.5 - 64 seconds)
  • Micro-based signal processing
  • Adjustable “tamper proof” shutters— to enable precise target area detection
  • Two "Form C" outputs
  • Swivel optics – allow for offset mounting
  • Patented black bug guard
  • Available in white or black
Item#:
0-000-361-01
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
|◀ 469 - 480 of 712 ▶|
View:
(Denotes required field.)