• Narrow 1-3/4 in. stainless steel wall plate
• 5/8 in. x 7/8 in. green rectangular push button
• Labeled "PUSH TO EXIT"
• Switch illuminated with hi-brightness LED, operates on 12 or 24 volts AC/DC
• Momentary action switch
• D.P.D.T. contacts rated 3A @ 35VDC or 120VAC
• Temperature range -25C to 70C
• 1-1/4 in. switch depth behind plate
• Other switch cap colors available
• Custom legends can be provided
• UL 294 listed

Alternate action push button

• S.P.D.T. contacts rated 4 Amps @ 28VDC
• Push button protected with 1" guard ring
• Switch terminated with colored leads

• Single gang stainless steel wall plate
• 2 inch green, square push button
• Labeled "PUSH TO EXIT"
• Momentary action switch
• Contacts rated 10A @ 35VDC or 120VAC
• Switch terminated with colored leads
• 2-1/2 in. switch depth behind plate
• Illuminated with hi-brightness LED
• Other finishes available
• Custom legends can be provided
• UL 294 listed

• 5/8 in. x 7/8 in. green rectangular push button
• Labeled "PUSH TO EXIT"
• Switch illuminated with high brightness LED
• LED operates on 12 or 24 volts AC/DC
• Momentary action switch
• Power input to timer is 12 or 24 Volts AC/DC
• Timer range adjustable from 2 to 45 seconds
• Timed output is S.P.D.T. contacts rated 2A @ 35VDC
• Switch depth behind page: 2-1/2 in.
• UL 294 listed

• Vandal resistant 3/4 in. brass nickel plated push button
• Labeled "EXIT"
• Momentary action switch
• D.P.D.T. contacts rated 10A @ 35VDC
• Switch terminated with 10 in. leads
• Switch mounted on single gang stainless steel wall plate
• Switch depth 1-1/2 in. behind plate
• UL 294 listed

Features

• Keyhole mounting for ease of installation
• Built-in time delay (instant release with adjustable relock, programmable from 0-90 seconds)
• Convenient plug-in wiring terminals
• Easy-access wiring cavity
• Stabilizing 4-bolt drop stop mounting
• Surge protection
• Designed to overcome residual magnetism
• 230mA Auto-Sensing 12-24VDC (Max at 12VDC for 8310, 460mA for 8320)
• Up to 1,200lbf Holding Force (Each Electromagnet)
• Lifetime Limited Warranty
• Fail-Safe
• CAN/ULC S104 UL 10C 1-1/2-Hours
• Optional Door Status Sensor (DSS)/ Security Condition Sensor (SCS) Available

The DS160 Series consists of the DS160 Detector (light gray) and the DS161 Detector (black) specifically designed for Request-to-exit (REX) applications. With features such as timers, door monitor with sounder alert, and pointable coverage, the DS160 and DS161 have the flexibility to meet the most stringent REX requirements. The exclusive Sequential Logic Input (SLI) provides added security that is not offered in any other REX device.

Features

• Door monitor with sounder alert
• Sequential Logic Input (SLI)
• Internal vertical pointability
• Wrap-around coverage pattern with precise pattern control
• Up to 64 second adjustable latch time
• Selectable relay trigger mode
• Selectable fail-safe or fail-secure modes
• Adjustable sounder volume
• Activation LED

The DS150i Series consists of the DS150i Detector (light gray) and the DS151i Detector (black). They are specifically designed for Request-to-exit (REX) applications. The DS150i and DS151i detect motion in their coverage area and signal an access control system or door control device.

Features

• Single or double door use
• Wall or ceiling mountable
• Internal vertical pointability
• Wrap-around coverage pattern
• Selectable relay trigger mode
• Selectable fail safe/fail secure modes