|◀ 325 - 336 of 679 ▶|
View:
You must be logged in to order this item. Log in here

  • IP65 rated, protected against dust and low pressure water spray
  • Single gang staineless steel wall plate
  • 1-1/2 in. red mushroom push button
  • Labeled "EMERGENCY DOOR RELEASE"
  • Latching action switch
  • One normally-open and one normally-closed contact
  • Contacts rated 10A @ 35VDC or 120VAC
  • Screw terminals
  • 2 in. switch depth behind plate
  • UL and CSA certified components

Item#:
TS-32G
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

  • Vandal resistant lever clutch mechanism
  • Choice of five standard architectural finishes
  • ANSI Grade 1 Heavy Duty
  • CSFM and MEA Listed
  • ADA compliant
  • UL Listed for 3 Hr 'A' Label Fire Rated Doors
Item#:
Z7252EQ
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

  • 1/4" button with guard ring
  • One normally-open contact pair and on normally-closed contact pair
  • Contacts rated 10A @ 35VDC
  • Pneumatic time delay range 2 to 60 seconds
  • Switch time is repeatable ±10%
  • Switch mounted on a single gang stainless steel electrical plate
  • Conforms to UL Standard 294 for Access Control, File Number SA32686
  • Temperature range +15F to +12-F
  • Switch depth 2-1/4" behind plate
  • Stainless steel plate

Item#:
TS-15
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here

  • Compatible with all ENFORCER 315MHz transmitters
  • Use to control garage door opener, house lights, alarm control panel, or other devices via remote control
  • 10A @ 24VDC or 120VAC per channel, NO/NC/COM
  • Frequency 315MHz
  • This revolutionary receiver incorporates:
    • Hi-Q SELECTIVITY and a CODING IC for rejecting unwanted RF signals.
    • HIGHER SENSITIVITY for greater operating distances.
    • UNSURPASSED ANTENNA MATCHING CAPABILITIES so the receiver is less affected by how and where mounted.
    • GREATER TUNING STABILITY so the receiver's frequency remains unaffected by shock and vibration.
  • LED indicates RF reception, learn mode entered, transmitter learned, memory cleared
  • Mode switch for easy transmitter learning
  • Learns up to 15 transmitters
  • 5 Output modes (programmable):
    • 4-Second momentary,
    • 1-Second momentary,
    • Toggle,
    • Validity: receiver outputs for as long as the transmitter button is pressed,
    • Latch
  • Screw terminals for simple connection

Item#:
SK-910RBQ
You must be logged in to order this item. Log in here
|◀ 325 - 336 of 679 ▶|
View:
(Denotes required field.)