|◀ 61 - 72 of 1695 ▶|
View:
  • Low-profile smoke detector design
  • Low standby current
  • Two LEDs blink in standby
  • Detector head plugs easily into base
  • Built-in test switch
  • Field sensitivity metering of detector to meet the requirements of NFPA 72 with the use of RTS2/RTS2-AOS and SENS-RDR
  • Designed for mounting on a standard electrical box
  • SEMS screws for easy wiring and positive wire retention
  • Removable cover and insect screen for field cleaning
  • Remote push button Test/Reset, LEDs provide visual indications
  • Onboard supervisory and alarm relays
  • Accepts 24 or 120V supply voltage
  • Interconnect up to 100 units for common functions
  • Compatible for interconnection with System Sensor InnoviarFlex™ D4120 or D4120W duct smoke detectors and remote accessories
Item#:
2D51
You must be logged in to order this item. Log in here
  • Protective polycarbonate cover for horn/strobe units
  • Open back box
  • Conduit knockout
  • Easy access for service
  • UL/cUL Listed, MEA 49-00-E, ADA Compliant
  • See install for Light Derating Factor
  • 8.5 in H x 6.5 in W x 5.75 in D
Item#:
STI-1210D
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
Item#:
SENS-RDR
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
  • Large clear conduit spacer for 1/2″ orĀ  3/4″ rigid conduit
  • Includes one weather gasket (STI-3002), one rigid conduit gasket (STI-3004), and anchor packet
  • For use with STI Weather Stopper models and indoor/outdoor applications

Item#:
STI-3104
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
  • Low-profile smoke detector design
  • Low standby current
  • Two LEDs blink in standby
  • Detector head plugs easily into base
  • Field sensitivity metering of detector to meet the requirements of NFPA 72 with the use of SENS-RDR
  • Designed for mounting on a standard electrical box
  • Removable cover and insect screen for field cleaning
  • Accepts 24 or 120V supply voltage
Item#:
2151
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
  • One-piece design with 18 gauge galvanized arms and mounting plate
  • Countersunk 8-32 mounting holes accommodate self-aligning screws to secure 4” square devices without danger of cross threading
  • Keyhole screw slots for easy and precise mounting
  • 4 claws on each arm to stabilize unit during device installation
  • Appliance box is suitable for mounting strobes and speakers from most manufacturers

Item#:
SSU00481
You must be logged in to order this item. Log in here
You must be logged in to order this item. Log in here
|◀ 61 - 72 of 1695 ▶|
View:
(Denotes required field.)