S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
The HWF2-COM Series LTE / IP fire communicators are single or dual path commercial fire alarm communicators that offer contact ID reporting with any fire alarm control panel (FACP) with a built-in dialer.Â
The HWF2-COM Series LTE / IP fire communicators connect directly to the primary or secondary communication ports of a fire panel’s digital alarm communicator transmitter (DACT).
Three selectable reporting paths include: LTE cellular only, IP only, or IP primary with LTE cellular backup. All signals from the HWF2-COM Series are delivered to the AlarmNet® network control center which routes highly encrypted cyber secure Ethernet data packets via a customer provided Internet connection or LTE cellular network to the appropriate central station. The AlarmNet® network control center is fully redundant and monitored 24/7.Â
Easy installation and programming through the AlarmNet 360 website, using the hand-held 7720P Programming tool, or using the control panel's programming mode (for panels that support this option).
- LTE and IP connection tested every day
- Three selectable reporting paths: LTE cellular only, IP only, or IP Primary with LTE cellular backup
- Requires no change to the existing FACP configuration
- Connects directly to the primary and secondary telephone ports of a DACT
- Plan choices range from 5 minute, 60 minute,  6 hour, and 24 hour supervision intervals
- Operates over the following communication protocols: LTE, HSPA+(4G) HSPA (3G)
- Works over any type of customer provided Ethernet 10/100 based network connectionÂ
- (LAN or WAN), DSL model or cable modem
- Data transmits over standard contact ID protocol but is secured with the industry's advanced encryption standard (AES 256 bit)
- Supports both dynamic (DHCP) or public and private Static IP addressing
- Reliable connection: IP and cellular connection tested every day
- Built-in, stand alone Power Supply module. On board charging circuit design accommodates battery back-up. Includes primary power and battery supervision
- Diagnostic LEDs indicate signal strength and status
- QOS: Quality of Service diagnostics via AlarmNet conveys vital communicator information including signal strength, message path used, and when the message was received
- 7720P Hand-held programmer for easy setupChoice of LTE provider services
Replaces IPGSM-4G.
Item#:
HWF2V-COM
You must be logged in to order this item.
Log in here
Compatible with GEM-P816, GEMP1632 and GEM-P1664 control panels and Gemini alphanumeric keypads.
Indoor/Outdoor Temperature Sensor provides Temperature Display at any Gemini Alphanumeric Keypad in a GEMP1632 and GEMP1664 System. Keypad will show Temperature in display, from -30 to 60C or -22 to 140F (replacing "Date" on keypad-display), e.g., GEMK1VPS, GEM-DK1CA, GEM-K1CA, GEM-RP1CAe2. Module is mounted inside or outdoors, to display either the temperature outside or inside room temperature.
Indoor/Outdoor Temperature Sensor provides Temperature Display at any Gemini Alphanumeric Keypad in a GEMP1632 and GEMP1664 System. Keypad will show Temperature in display, from -30 to 60C or -22 to 140F (replacing "Date" on keypad-display), e.g., GEMK1VPS, GEM-DK1CA, GEM-K1CA, GEM-RP1CAe2. Module is mounted inside or outdoors, to display either the temperature outside or inside room temperature.
Item#:
GEM-TEMP64
You must be logged in to order this item.
Log in here
S2K Administration - Form Template Display
Actions
(Denotes required field.)